2jz gte swap

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 11, 2012
Threads
95
Messages
1,126
Location
houston
Has this been attempted?

I'm a HUGE supra/SC fan and in the process of planning my sc300 build I almost went 2jz. They're plentiful on eBay - and can make insane power quite easily & reliably.

Thoughts?
 
1fz eats hg's. my 3fe is a dog though.

May just do a 4bt cummins.
 
Thanks for the quick replys btw. Just trying to figure out the best route for the age old problem All gear heads have:

Need moar power.
 
looks like he has a 3fe though
 
Don't listen to the haters! I think it would be a great swap. You could pick up a JDM 2jz-gte for less than it would cost you to replace the head gasket on the 1fz. (if you do it right)

Torque is meaningless. The only thing that matters is horsepower. You can infinitely change the torque to the wheels with gearing. You can't change HP. (without changing the actual output of the engine)

JW
 
Torque is meaningless. The only thing that matters is horsepower. You can infinitely change the torque to the wheels with gearing. You can't change HP. (without changing the actual output of the engine)

JW

pretty foolish statement.

you do know that HP is calculated from torque, right?
 
Don't listen to the haters! I think it would be a great swap. You could pick up a JDM 2jz-gte for less than it would cost you to replace the head gasket on the 1fz. (if you do it right)

Torque is meaningless. The only thing that matters is horsepower. You can infinitely change the torque to the wheels with gearing. You can't change HP. (without changing the actual output of the engine)

JW
thats a good one:doh::bang:
 
Don't listen to the haters! I think it would be a great swap. You could pick up a JDM 2jz-gte for less than it would cost you to replace the head gasket on the 1fz. (if you do it right)

Torque is meaningless. The only thing that matters is horsepower. You can infinitely change the torque to the wheels with gearing. You can't change HP. (without changing the actual output of the engine)

JW

Wow.. Really..
 
Don't listen to the haters! I think it would be a great swap. You could pick up a JDM 2jz-gte for less than it would cost you to replace the head gasket on the 1fz. (if you do it right)

Torque is meaningless. The only thing that matters is horsepower. You can infinitely change the torque to the wheels with gearing. You can't change HP. (without changing the actual output of the engine)

JW

Are you fxxxing kidding me lol! Wow:bang::popcorn:

Sent from this fast HTC thing using IH8MUD
 
Don't listen to the haters! I think it would be a great swap. You could pick up a JDM 2jz-gte for less than it would cost you to replace the head gasket on the 1fz. (if you do it right)

Torque is meaningless. The only thing that matters is horsepower. You can infinitely change the torque to the wheels with gearing. You can't change HP. (without changing the actual output of the engine)

JW

For quoting.

pretty foolish statement.

you do know that HP is calculated from torque, right?

thats a good one:doh::bang:

Wow.. Really..

Are you fxxxing kidding me lol! Wow:bang::popcorn:

Sent from this fast HTC thing using IH8MUD

And THESE ^^^^^^^
 
yeah eff torque you don't need those!!!
 
Don't listen to the haters! I think it would be a great swap. You could pick up a JDM 2jz-gte for less than it would cost you to replace the head gasket on the 1fz. (if you do it right)

Torque is meaningless. The only thing that matters is horsepower. You can infinitely change the torque to the wheels with gearing. You can't change HP. (without changing the actual output of the engine)

JW

Torque is meaningless? Yes in a 2k lb vehicle maybe but not in these sleds lol.. If torque was meaning less then why aren't semi trucks gas engines with ridiculous diff ratios? Diesel engines are pretty much all torque.
 
Torque is a measure of twisting force i.e. when you torque a head bolt you put a certain amount of twisting force to it. This is what turns the wheels, the more torque you have the easier it is for the engine to turn the wheels, the heavier the vehicle is the more torque is needed to turn those wheels. Horsepower is a calculation of how fast work can be done, it is calculated by using the amount of torque the engine has. If you notice rice rockets that have 400hp have it around 7-8000 rpm because they have little torque so it takes the engine turning that fast to generate the hp numbers. Look at jetski's they have 155-250hp from a one liter (or less) displacement engine. They never quote torque numbers because they probably only have about 20ft lbs of torque, good when turning a prop in water, but not for pushing a 6000lb rig down the road. I don't see the 2jz being a good fit for these rigs, you would be even slower off the line then it is with the 1jz due to lack of torque. Oh and the 2jz pops head gaskets just as easy as the 1jz. But I love both of em!!
 
The engines you are referencing are indeed no good for large heavy vehicles, but this is not because they lack torque. It is because they do not produce a useful amount of horsepower (or torque) at low RPMs. In order to wring out that much power out of a tiny engine, engine performance in low RPM range is sacrificed to make a higher peak HP (and torque), albeit in a very narrow RPM range.

Horsepower is a measure of power (the ability to do work). Torque is a measure of force. It is true that you measure torque and calculate HP, but that is because you can't measure HP directly. HP is Torque X RPM. (X a constant)

A 1HP motor can be geared down to produce 1000 lbs/ft of torque at the output shaft; it just won't get much work done because it will be turning VERY slowly. You cannot change the power output of the 1HP motor, but you can change the torque output.

A stock JDM 2jz-gte is not a high strung race engine making it's only useful power at high RPM. Hell, a NA 2jz-ge has numbers that are pretty similar to a 1fz.
 
Semi trucks (and ships and large equipment) are powered by large, slow turning diesel engines because of other, practical considerations. Piston aircraft are powered by slow turning, large displacement gas engines for the same reasons.

Fuel consumption, longevity, and simplicity.

You could take a 175 HP motorcycle engine turning 13,000 rpm and gear it down and operate heavy machinery with it as well as a 175 HP diesel turning at 2600 rpm. The diesel would be much more efficient and reliable than the motorcycle engine, however.

But, we aren't talking about powering earth movers with snow-mobile engines here.

I'm sure that the internals of a 2jz would wear out faster than the internals of a 1fz; but how often does wear actually limit the life of one of these engines. (provided they aren't tuned to ridiculous numbers)
 
Back
Top Bottom