up

I am needing a new driver seat switch for a 95, the one with up/down, forward/back and recline. I am getting the seats recovered and in moving them around I broke the knobs off and now the seat won't move. I did a search and as of a couple of years ago they were harder and harder to find...

Hey y’all! Last meetup for the year! Place: Aviator Pizza & Drafthouse - 4005 W Parmer Ln Unit E Austin, TX 78727 Day: Sunday the 10th Time: 12pm

So... I sandblasted my block fully aware of the risks. Closed off all openings into the engine, using a fine grit and low pressure to get good results. Turns out the gaskets of the valve covers failed and the grit is now inside the engine. What are my options? First off i'll vacuum most of it...

That's right, take them back out of the trash I want them. Provided this part is in tact and not cracked. need pairs.

I had dropped my windshield frame off at the local glass company and was going to treat myself to having them install the glass after they cut it, I had also dropped off a gasket and and lock strip that I bought from a vendor choosing the generic one and not OEM. Big mistake on my part. After...

I just installed idle up hose no.1 on 2007 Lx470 (17030-50070). Does anyone can share the picture of it install? I want to make sure I did it correctly. TiA!

So, I haven't been able to find much on anything to beef up the front other than to throw a solid axle on. Is there any content or anything floating around in regards to: - Front Diff Swap from another Toyota bigger than 8" - Spindle gussets - I don't really see anything out there - has anyone...

Hey all, I'm new to the community and I have purchased a new to me LHD Land Cruiser Prado and I figured I would share some of my experiences along the way as I begin to modify/perform maintenance on my Prado. Below is so info on the idle up function: I did some digging the other day and I...

Hi all, left europe, now driving in Africa (senegal) need my AC a lot more. Thanks for helping to source the item : 88690-90A13 Idle up for AC (12HT 24volts). Thanks

There seems to be more bikers on here than I thought. Post up your bikes. Here are my two: I do not normally ride with the seat that low, I was riding a little downhill earlier.:D Manitou black fork, LX shifters and front deraileur, XT rear, Bontrager wheels and hubs(hoping to get a new...

Mark your calendars for October 21, 2023. That is the date for the Bay City Lions Club 2023 Rice Festival Car Show. I attended last year's event and it was a blast. But, unfortunately, ours was the only Land Cruiser represented. Since the organizers had no idea, they put us in the "Exotic"...

2007 LC 265,000 miles replaced upper and lower control arms, wheel bearings, one axle in the last two years. Steering rack was replaced about 5 years ago. Slight sensor lift on 34" tires. Every so often and more recently when I turn the truck left (like making a left onto a side street) the...

Mark your calendars for October 21, 2023. That is the date for the Bay City Lions Club 2023 Rice Festival Car Show. I attended last year's event and it was a blast. But, unfortunately, ours was the only Land Cruiser represented. Since the organizers had no idea, they put us in the "Exotic"...

Installed this Autovox V5Pro yesterday and it works like a charm! (After a few hours and two trips to autozone to get properly sized add a circuits of course). This thing is exactly what the car needs, full HD edge to edge, records front and back to micro as while the car is running, and...

Tonight when I started my LX570, none of the gauges would light up, and I was wondering if anyone has experienced a similar issue? Everything else seems to be working fine, just the gauge lights and the little LCD in the middle isn't doing anything. Thanks in advance!

In the process of rebuilding the sunroof. I have pulled everything, cleaned everything, replaced guide carrier/cassette and both sides of drive cables with new, new weatherstripping around glass, and replaced motor and switches. Powered up- I can send the sunroof back all the way into the...

Trying to hook up a radio\tape deck that was disconnected on my 82 FJ40 and can’t figure it out. Any tips on the wiring for the radio?

I'm missing a piece on my carb that the idle up actuator mounts to. This is for my 1985 FJ60. Please let me know what you've got. Thanks, Justin

2lt, mech pump. As it's getting colder out I'm noticing when I crank the engine over, as soon as it catches it revs up for a second then drops down to itd normal idle. Like if you blipped the throttle accidentally. This is the first time I've seen this, doesn't happen all the time, only if...

Spent the whole afternoon on a new bearing and seal. Cracked the extension housing on reinstall. Either misaligned the pump drive or the pump spacer fell down. Doggone it. Pics of the part that went well: