I'm throwing my rig a bit of a 200k mile birthday party, and as part of that I dropped the tank and installed a new fuel pump as PM. The logic for this was the few reports of bad fuel pumps (Teckis, others), or fuel pump ECUs (CharlieS, seems like a couple more) which I believed at the time had...
A few months ago i did a 4wding trip in the south island , so i decided to build an aluminum water tank for my 80 series to save a little bit of space in the truck, Completely unnecessary. But when i was measuring it up and building it, i realized these sh*tty drawings would be useful to people...
I drained my tank in my FJ40. The rubber gasket is intact on the bottom of the tank (I left it in place, since it didn’t come off with the plug). Is the any sealant I can/should use on the plug when i reinstall it to ensure I don’t have leaks? Is anything recommended or useful?
Thanks!
I'm looking at this on Ebay they call it a liner, made of plastic, my question is this used in place of the metal top cover. My project is not a 100 pt. resto so a simple plastic cover for the top of the tank would work just fine for me. Can anyone fill me in on this...
So I smashed my tank in on the rubicon and I am trying to think of a way to pull it back down any ideas? My float is stuck at half tank also but the low level light still works
I have a good condition fuel tank from a 97 80-series. Had two tanks and had both inspected, cleaned, and recoated and am keeping one, but don't need the other.
Will start by asking $600 shipped but open to offers. I don't have anything but the tank.
2 issues I have, and have always had, with my LRA tank:
Main tank fills ultra slow. At most gas stations, I can't even get the auto fill clicker to engage at the slowest setting
I'm having a professional mechanic go through it to see if he can find the issue and correct it, but no luck so...
This high capacity fuel tank came off my 1982 FJ60. It needs to be pressure tested and possibly welded up on one of the edges. Or, if you can weld, you can make another one based on this one. The dimensions are about 14" H x 34" W x 26"D. There is a 45 degree angle at the bottom rear of the...
Hello,
My LC is year 2003, it has two tanks.
The primary fuel guage reads, but when i press the button for the subtank, it shows empty with the low fuel light, even if it is fully loaded.
How can I fix this problem?
I apologize if this information has already been discussed, but I was unable to find my combination of questions. I have a 10/85 FJ60 with a Holley Sniper. Currently I am running the frame rail pump, but am in need of more fuel capacity on many trips. Jerry cans aren't especially practical with...
1973 FJ55 with 47 gallon extended range fuel tank, old and rusty on the inside. I removed the tank after draining the very old and very brown gas out of it. Pressure washed the outside and blasted through a few small holes in the side. The build up and rust has destroyed the tank. Super...
Hi guys,
Using @cruisermatt ‘s vent hose replacement kit and all has gone great with it. I’m chasing a gas smell on the cab issue so figured I’d search for a clogged vent line. All the hoses looked fine, but I stick a very thin screwdriver into one of the metal ports the lower vent hoses attach...
Supposedly I have a 1980 FJ40, but a while back it was suggested that it might be a 1979 by an acquaintance.
I'm trying to find a replacement gas tank, as mine is full of rust - I have a cheap fuel filter in line before my fuel pump and it regularly gets full of rusty particles.
I want to get...
Looking for a place in ABQ or close to that is willing to replicate and build me a new fuel tank or to patch this rusted tank (no reproduction units available.