suspension

So in order to get a slight lift and increased payload in my LC 100, I had OME 863 springs installed in the rear. To counteract the rear lift, I had my mechanic crank the torsion bars to the max. From the center of the hub to the fender, I'm currently sitting at roughly 20.25" in the front...

Hi all, Purchasing clean fj60 with 237k in LA on tuesday. Engine rebuilt but needed a little updating (air filters, battery, NGk wires, distributor cap, plugs etc). Likely needs new suspension soon its seen a little offroading, the guy selling owns an LC shop which is sweet and is checking and...

Howdy Mud - Hope y'all are doing well! Posting a set of front and rear Rancho 5000-series shocks that I recently removed from my 1994 FZJ80. Previous owner installed these somewhere in the last ~5k miles. I recently upgraded/refreshed the suspension with a full Dobinsons 'stock height' setup...

4 OEM Toyota AHC Globes purchased from eBay less than two weeks ago. Too many parts of my system need replacing, so I am switching to a conventional setup. Globes have less than 100 miles on them. I paid $965, asking $800.

Hello, I have an assortment of AHC parts I will be selling from two different vehicles. **ALL PARTS SOLD AS IS** 2000 LX470 with 185k miles -All Four AHC Globes (Getting 8-9 gradations, rough ride, probably need to be recharged) $50 for all four + Shipping -All Four Accumulator’s (the part the...

I have a 2000 LX470 with 185k miles that I inherited from my father. Ive been getting everything up to date with maintenance, and the suspension is something I just kind of forgot about until now. My mom has a 2006 LC that has an OME Medium kit on it, and I noticed that my LX was driving rougher...

I have an 07 GX470 with KDSS and I have had no real issues with the drivability of the vehicle until this weekend. I was driving my friend to the airport when I noticed my ride went from a smooth and comfy one to bouncy and harsh. Every bump felt much harder, and the car felt bouncy. I tried...

I have been hearing squeaks from driver side rear suspension. I got under the car and found spring misaligned. Does anyone has any suggestion of how could it has happened? I did some intermediate wheeling in the past weekend, but it doesn't seem to make sense of why the spring would end up in...

I recently installed OME lift springs on my 80. 2" inch up front and 3" in the rear so it's level under load. Everything is perfect under load, but when I'm light, I get vibration on the highway decelerating between 60-70 mph. I'm assuming its one of the drive shafts just out of its ideal...

Recently purchased a used 04 GX. I dropped it off to a widely respected shop (RPM Garage for the SoCal folks) who came back with a longer list than I expected. Truck needs: CV's Swaybar Links (Front and Rear) Front Lower Control Arm bushings Rear Lower Control Arms Shocks F/R Airbags are shot...

For sale is the factory suspension pulled from 2020 LC200 Heritage today. This includes UCAs, front coilovers, rear shocks and rear coils. ~650 miles on them so they're basically new. Asking $500 OBO.

Hyd everyone. I am new to the forum and looking at buying a 1987 HJ60 that is RHD. Talking to the seller, he says it needs new sway arms (confirmed during the test drive). I am just cautious based on not know the part availability for a JDM RHD truck. Are the LHD parts such as sway arms...

I just did the Tundra-parts long travel suspension thing to my wife's new 200, and had ARB bumpers fitted, so have a bunch of virtually new parts we don't need anymore. I'm going to individually list the suspension parts below with prices (figure a reasonable formula is half what these list for...

Hey everyone. I am looking to upgrade the suspension on my 2000 LandCruiser. It’s stock right now, with 300,000 miles (I’ve only changed out the rear shocks once, and the front shocks are original OEM - so I’ve gotten my money’s worth.) It’s my daily driver, but I hit the trail twice per month...

Hey all, sorry on mobile and having trouble navigating, but I’m wondering what’s the recommended procedure to grease/lubricate suspension and drivetrain components? I have silicone lube spray and white lithium spray and was thinking of loosening the ubolts and other metal on metal suspension...

Vintage Koni Adjustable Shocks New in the box still, never mounted. Model 8241-1022. Approximately 27" long. Asking $200 for all 4.

After lurking in the shadows and consuming all the info I could my wife and I made a leap and purchased our 2017 GX460 last week. It is black on black with 40k miles. I have an SSO roof rack coming, blue ridge overland panels, better brakes because they are pretty mushy, and an MTS module. I...

Hey there, As my title says, I was swapping/upgrading my front shocks when I found what looks like some sort of disconnected tubing. Just looking to identify what exactly it is and if I need to fix it. I'll attach photos of how I found it and a slightly clearer view. Cheers, Logan

Mudders — I am rebuilding a trailer suspension for a client. Their tear-drop's original suspension cratered, big-time [see Photos, including an photo of the whole trailer]. It's a relatively simple set-up: an axle, attached to parabolic springs by u-bolts, with shackles to the rear, and...

Best offer. OEM leaf springs off a 1973 FJ40.