steering

I have owned an 03GX470 for a long time (years). It has around 300k miles. The steering is tight, the suspension is tight. It is totally stock and no replacement of any suspension parts (though I have done ball joints, etc.). But... I bought an 04, and it drives like an old pickup truck...

So ya, have the truck now..97lx450..and as reported it def. does wander at 60-65..or more. I'm on a Dobinsons 2.5" life with 35" wildpeak mts. No radius arm drop brackets..Knuckles rebuilt less than 2k miles ago..apparently bearimg replaced too. please drop some ideas of what it could be...

Hey guys, When driving my rig in the past (hasn't run well in 2 years) I would get a popping noise felt in the steering column, which was alarming. The engine situation took precidence, and here I am 2years later wondering what this is still. I've driven it a couple blocks so far and haven't...

Various years and conditions

78’ FJ40 US-spec Been scouring the internet for photos of this but I can’t find a clear shot. I think this is a non OEM end (drag link end?) The threads are super long and I can’t remember if the castle nut should be snug to the bottom of the center arm or lined up with the hole. Kind of an...

I’m currently cobbling together some parts to switch my fj heim steering. I’ve got a 22 4Runner rack, 3/4 heims, and a double shear kit. Probably going to run some dirt king clevis as I cannot find anyone else who makes a clevis that fits this rack. Anyone know of other options for the...

Power steering box with mount setup. $700.

Hi, While checking the torque for mounting the steering gear to the frame in my rig I realized that there are different torques in Haynes (122 Nm) and RM184E (142 Nm). Do you know why, and which of these two is correct? The RM184E is from Jan 1980 but in the supplement from 1992 (RM315E) there...

Anyone have instructions on rebuild of an October 1973 FJ40?

What are the likely culprits for a loose steering wheel? Tie Rods.... what else might it be? When driving down the freeway, you have to stay on top of the steering. There is probably 3-4" of play from dead center (1.5"-2" on each side from dead center)

I have a 23 Luxury w/ Offoad + every option available. Knew it was the final V8, and wanted to make sure I own this piece as a forever truck, drive it till it does thing.. For those who don't know, Comma Ai is a plug & play level 2 self driving system. I have it on my 22 Ram 3500, and and it...

Loking for a tan steering wheel in decent condition. I know I can recover mine, but if someone has a decent one at a good price offering, I'd rather that. Need Tan FZJ80 steering wheel (dont need center airbag) Thanks. Mac

I'm not sure why everyone says these bushings are hard to get out.... Mine fell out. 🤣🤣🤣

I put new shocks on from toyota in 2019. Just did a Redline 2.5” and want to find a new home for the stock shocks. great condition.

I recently acquired a 2007 Land Cruiser. 50k miles. Excellent condition overall. I was following the handy AHC guide here and doing some poking around with Techstream and everything looks pretty good there however... the steering angle sensor reading is wrong. When the wheel is pointed straight...

Hi all, I've been noticing some noise coming from the steering wheel when I go over uneven bumps or drive on rougher roads. I am also able to replicate the noise with the car turned off by shaking the steering wheel. I'm hoping that its something simple and easy to fix. if not, i guess ill have...

How does the 570 heated steering wheel system work? I want to retrofit the heated steering wheel inards onto my LS430 steering wheel. My question is the wiring under the leather on the wheel is there resitors and stuff built in there or can I just get an oem switch swap the innards over and it...

So, I'm posting this here since I didn't come up with any good results when I searched. I spent way too much time trying to figure out the numbers on the bearings, too. After removing my steering wheel for some R&R, I decided to see what conditions some of the bearings in my steering column...

I'm very close to pulling the trigger on a 97 Lx..2.5" OME, on 35" wildpeaks. Seller says steering wanders a little bit after 60mph. I'm out of state so can't test for.myself. I've also reviewed some of the posts on here, so have a good idea it's either toe adjustment, or various parts to...

I installed OME 2865 coils a few months ago and cranked up my OEM torsion bars less than 1.5 inches and then had had it aligned. The steering became super light and I ended up with a shimmy in the steering wheel around 70mph. The shocks are new OEM, the UCA is original and I have not added a...