seal

Hello everyone, couple of issues I hope somebody can provide me with some input. Have a FJ40 with a orion transfer need to find a speedi sleeve for the park brake hub since it was leaking ,question does anyone knows the correct speedi sleeve to use and recommendations as to were to acquire and...

Is there a part number for this weather strip that mates up to the normal door seal? I need to replace mine on both sides but haven’t been able to locate a part number on it nor do I see it listed aim any of the usual parts sites. Thanks in advance!

Dear Friends I ask you because the bearings of the gearboxes come with seals that prevent the lubricant from reaching the bearing. Does anyone have an explanation? Thanks William

I have a few leftover parts from doing the timing belt on my 2000 LX 470 I guess I got click happy and ordered two of everything. These have been in the box for 2 years. I’ve got OEM Toyota and an Aisin kit. Toyota version - $30 Aisin version $20 Plus shipping

Does anyone know where I can get a weatherstrip for this rear window? I think they’re unique to the MWB models. I think OEM is out of production, so hoping there’s an aftermarket source or a similar Part that can sub in.. I’d prefer not to have to try and sika the thing back in… Any ideas...

Flares gasket new Never used, since I went flareless bought from a vendor here summit cruiser 30 shipped

Hi all, I'm doing a rear main seal on my 1hz, but seal housing looks incorrect, (see pics, can see gap at top) motor is second hand and has leaked from word go. Was wondering if 1hdt and 1hz have differences in crank or bearings causing 1hz crank to sit lower. If so i will order correct housing...

Hello looking for a nice rubber seal. i have the glass but the rubber seal is not the greatest. I am sure other years will work, as long as they have the larger full window like the 1976

Used hood to cowl seal from 1989 FJ62 - used, cleaned, and coated with dielectric grease - in good condition, but without clips. $40 OBO + shipping. PM if interested. -

Hi, I had a h55f tranny swapped for my 4-speed but the e-brake drum behind the t-case was reinstalled (I was told 60 series didn't have that drum behind the t-case). I have a slight leak of t-case oil between the sleeve that bolts onto the t-case and the backing plate. I assume it's coming...

I’m finishing refurbishing my 1977 FJ40 OEM air cleaner. All seals are no longer available from Toyota. I did some searching and found that most people address the seal around the edge of the air cleaner cover with little mention of the seals on the top and bottom of the filter itself. To me it...

I just pulled my transfer-case out of my 97 to get gears and rebuilt. I was wondering if the seal around the transmission output shaft can be replaced without disassembly of transmission? Is it simply a press in seal? Thanks!

Hi! My FJ40 has a oil leak and I am told by my mechanic that my 73' FJ40 needs a rear main seal and that the transmission needs to come off. My question is: What are some non-expensive things I can do during this process? As in what gaskets, seals, etc, would be good to replace or what are...

FJ60/62 windshield gasket, seal Toyota factory part. Never installed. $50.00 +whatever shipping Please PM if interested

I need to find this seal locally if possible, it's the seal inside the input shaft housing on an H41/42 (right behind the throw out bearing). Anyone have a part number that Napa would be able to reference?

Hey there, Ever since I own my BJ74, it has lost a couple drops of engine oil. It wasn't that noticeable at until the last couple of years when a 2-drop pattern as if the leakage came from both rear corners of the oil pan took shape. After cleaning, I came to realize the leak might come from...

I have a trailer made from a 72-75 Hilux going by the tail lights. One of the axle seals has started to leak. Besides the seal are they any other gaskets I'm going to need? Will I need to press the bearing off to replace the seal? I'm also thinking about pulling the ring gear and flipping the...

Just got a 4Runner from TX over the weekend. The PO told me I needed to recharge my '87s A/C system with R12 and it'd be good to go. Bought R12a on Amazon and went to work. The system held pressure but I could hear some hissing. A/C finally blew cold, but wasn't freezing as I was expecting...

Hello I purchased a 97 lx450 a few months ago with all the normal oil leaks. Thanks to Mud I was able to fix all but one last leak. The last one was the oil pan arch /rear main seal leak. Oil was on the bell housing. Thinking the oil pan arch was the cause of the leak, I went that route to see...

Getting ready to do my second timing belt job and planning on replacing the cam and crank seals. They aren't leaking, but I think it's prudent preventative maintenance. Does anyone have any tips or suggestions on installing the seals? Is a large socket and a hammer the right way to get...