rear axle

Need a FJ80 rear axle to finish my build. Ideally looking for a full floater with disk brakes. Don't need the 3rd member if it makes any difference. Located in Sacramento, CA area

Have a pair of FJ62 rear axle shafts from an 1989 FJ62. $75 for the pair plus shipping. Also have a rear housing backing plates are shot. $25 don't want to ship. Also various driveshafts from fj60, fj62 and early small pattern yoke from probably a 40 or 55. $50 I am about 1.5 hours south of...

Know where I can find Leaf spring perches for a 93-97 landcruiser rear axle. I plan on swapping a full float onto my mini truck for a camper platform. thoughts, I want your 2c.

I have pulled the rear axle out of my '95 to swap into my '97. It does have the e-locker. I have read in other posts that the axle should be locked when i re build it. True or false? The FSM does not mention this.

I have a complete HJ60 rear axle with the sway bar attached. Will include a picture. Axle is complete, with third and drums still on. Never opened it and I have no use for it. I was going to keep the third as spare but I never wheel hard and I will probably never need it. Gearing may be 3.73:1 I...

SoCal $500 firm. This is fully complete, with brakes etc. I have an engine hoist to load it into your truck or trailer. It is out of the Land Cruiser and ready for pickup. If you want me to ship it, add $50 to put it on a pallet and strap it down and deliver it to your shipper. Make your...

Better start this search now. Anyone with a lead on one? Or point me somewhere? Overseas? I'm in no particular hurry but I want this as my summer project. I'm located in SoCal. Open to freight shipping. Thanks!

I have a crusty rear axle from a LJ70, it should have 4.88 gears in it and is good for parts for someone that owns a LJ series Cruiser and wheels it occasionly to have some spares in case you ever need them. 150$ to get it out of my way

Hello, I have a 1997 4Runner SR5 3.4 v6 5 speed manual. I'm getting into some more trail riding, so I decided to hunt down a e-locker and swap my open diff with a locker. Found an axle at Spaldings in Spokane and started the swap. The donor vehicle had 277k on it with 4:30 gears. I have 4:10...

So, I have a canadian fj45 rear axle and I want to install the TrailGear studless hub. The problem concern the inner seal that prevent the diff oil to mix with the grease inside the hub. There seems to be 2 types of seals: 1) canadian version: The seal is made to go on the end of the outer...

Disassembled for spring over, never got around to finishing project. Will ship individual components on your dime, backing plates are pretty well shot. $150 complete. $100 for 4.11 diff, $75 for both axle shafts. Located 1.5hrs south of Chicago.

I have a spare 70 series complete rear axle. It has drum brakes, E brake with associated cable, and it's a semi floater. The spring perches have been removed and a set of RUFFSTUFF perches will be included with the sale. This would make a great upgrade for a 40 series wanting to have an axle...

Found many on EBay, but all from down under where the shipping is more than the actual tool :meh: Where can I get one in the US? Any of our sponsors carry them? Yes i know one can easily be made or substituted with a pair of screwy drivers, but I'd rather just have the right tool on hand ;)

Does anybody know where I can find a Video on how to remove the rear axles so I can replace the bearings and seals? I have done the front bearings and seals and knuckle bearings already, plenty of videos on the front but not the rear. I looked on youtube but its either the wrong series of LC or...

I'm looking for a 1993-97 80 series rear axle assembly, non locker. Thanks in advance.

Selling my '94 rear non locked complete axle. Unknown miles on it. Picked it up for my '91, but sold it before I had the chance to install it. Located in Colorado Springs, willing to meet anywhere in Colorado for a small delivery. Will work out price depending on distance. Looking for $400 obo.

So I'm upgrading to RCV's up front, what are the best options for the rear axle? I primarily wheel in the snow where weight does matter a little, but it would also be a really bad place to get stuck if an axle fails. I'm definitely on a budget due to having too many projects, but I know that a...

Complete rear axle from 1989 FJ 62. Disassembled to start spring over and sold project. Factory 4.11s backing plates are pretty well shot. Will sell components if wanted. $200 complete will ship on your dime. Located in Granger Indiana

Ideally low mileage but has to be completely rust free. Located in VA, so the closer the better but I'd be willing to pay for shipping if you can put it on a pallet or something. Let me know what you got, thanks!

Hello all, I got a challenge for you! I have a 1976 FJ40 in Nicaragua, i say that to preface the fact that anything goes, take nothing for granted when pondering the cause of my issues, and parts are very hard to come by. I was noticing a loud clunk in my rear end, so I propped it up and...