rear axle

I have a '84 FJ60 semi float rear axle that is built with 5.29 Nitro gears, ARB locker, disc brake conversion, and trussed. I built it for a FJ40 build but have never used it. Currently set up with 4 link brackets. $2,000 OBO.

I did some searching on this but wasn't able to find any hits on my issue. I had my gears changed from stock to 4.88s at a reputable local shop, and since then, I've got grease leaking all over my rear left wheel. It's not much, and I clean it off each time it gets washed, but obviously...

Hey guys- I’m humming along and got hit with a bit of a puzzle. So I need to remove my entire rear axle off of my rig for some R&R. The question is on the brake line which is attached to a brake panel plate? I’m sure I screwed up the name but I’m attaching pictures on how to proceed. I need to...

Hi, Can anyone confirm these are the correct bearings for the rear axle on a 1991 PZJ77-MNS? 2 x 90365-47013 Partsouq also gives a Koyo equivalent as being RNU0727 but they don't stock it at the moment. This is a semi floating axle so am I correct in thinking that I should also expect to have...

1979 - 1983 toyota pick up rear axel housing w/ shafts, also has the welded on armor around the differential. price is negotiatiable, and open to trades. $400 obo purchased this axel from Jim's yota yard locally and my truck was totalled before i could install it. so i no longer have a need...

New in box kit from partsouq, unopened. Was going to have a local shop complete the labor, but due to timeline conflicts didn't work out and I ended up taking to Toyota. Going to return to partsouq unless someone has interest, thought I would post here first. Part numbers as follows...

My rear axle oil seals are shot leaking a bunch of diff fluid all over my drums, I have received the kit to do the seals and bearings just one question. Do I have to go inside the rear diff and undo a C-Clip to take the rear axles out or is that just in 40s and 55s? Sorry if this has already...

Hi, is somebody here, from Europe that has a rear axle for Toyota 80 series?

I have a 98-02 (4speed) 100Series rear E-Locker for sale. It Comes with a new 12v guy actuator harness and switch and has been tested. Here is a video $900 Freight Shipping Hub to Hub should be around 250. Let me know you zip and I can get a quote for you

I've looked all over and haven't been able to find anything conclusive, so I thought I would just make a post to ask the question and establish a concrete answer. When I look online at rear axle seals and bearings they appear to be split into pre-73 and post-73 packages. Reading online the...

E-Locked Toyota FJ80 / FZJ80 / 80 Series Landcruiser rear axle 9¼" diff (chunk/drop out also compatible with FJ60/FJ40 axles) Full Floater (I was told from a 1993) Complete MINUS all brake hydraulics (no calipers, hoses, hard brake lines) - I got it this way. If you've got a 93-97...

so i am about to rip my hair out beacause o the bolts constantly breaking. i run 35 inch tires and knkow people who have run 40 inch tires with no problems. i am wondering if som kind smart person have modifications to make it last

Regrettably, my first post on here is not as positive as I would have hoped. I recently purchased a 1997 LX450 with a bit of a rust issue. It turns out that it is a bit worse than I originally thought. The shop that I have it at, just informed me that the entire rear axle needs to be replaced...

I am looking to replace the entire rear axle on my newly acquired, '97 LX450. Need one with factory locker. Located in East Texas.

Hi, I am trying to get the semi float pair for offset diff as the previous owner decided to drill bigger holes to make way for wider bolts/studs, yeah this includes the drum as well! Does anyone know the spline count on these? Or the year they changed specs? I live in Mexico but have someone...

Hi there, I got a Hilux 4x4 camper with series 60 rear axle. Due to the heavy load I would like to put 16'' dually wheels on that rear axle but have troube finding rims the clear the drum breaks for the inner dually. Has someone done this sort of modification before? Any info is much...

Regardless of your political affiliation, I'm sure you'll agree that MAGA is overused. But as that slogan was getting tossed around all the time during the campaign, I couldn't help but think: Make the 80 Great Again! (M80GA) A few years ago, I was getting discouraged about the condition of my...

Hey ya'll I've been chasing an alignment issue as I've been baselining my 2001 hundy with 235k miles for several months now. She pulls slightly to the right, but VERY consistently. I drive a lot of hwy miles and it drives me crazy always having to correct the steering. Most recent alignment...

I have been (and still am) looking for a genuine Toyota rear axle vent, it is the longer one that also holds the brake line tee to the axle also. I was also wanting to extend the vent instead of having it right on top of the axle, so I was also looking for one of these: No luck so far, so...

Well I just spent a LONG time doing my first front axle job on my 1983 FJ60. I want to do a rear brake job as well. Not only is it long overdue on this truck, but when I bled the brake system for the front axle job the passenger side rear would not rotate with the e-brake off/on (not matter...