In the process of installing a new radiator and all the bolts are rusted/snapping. I’ve seen the metric overland kit that has all the bolts but is out of stock. Does anyone know of another source for the bolts besides the dealer?
My radiator has a leak and the engine temp goes up unless i am traveling at above 40 MPH. What brand should I buy? I also want to replace the hoses too. Thanks lads.
Sorry new guy card! I recently bought an '89 FJ62 with 240k miles and am in love. It is my daily and slowly working through issues as is pretty clean but has its unique little things I am slowly finding. My current issue I cannot figure out is loss of coolant but was not seeing any drips so...
My 87 FJ60 has a few pinholes and leaks in the radiator and I am on the hunt for a new one. I’ve read a ton of threads from the last 10 or so years but still can’t decide which one so looking for some real world experience with a radiator purchased within the last 5 ish years. Im not opposed to...
Good afternoon fellow Land Cruiser connoisseurs. I'm selling an extra radiator for the 100 series (Denso 221-3152) . Radiator is brand new and in perfect condition. A steal at $180. Preference is not to ship but will if you want it that bad (Price will reflect any shipping expense which is yet...
I have a 93 FZJ80 223k stock no motor mods, 35"tires re geared to 4.88, dont tow anything.. have not noticed any cooling problems so far. wondering at 3 times the cost of OEM is the Ron Davis worth the extra money and is there any better cooling with it over stock?
not a daily driver used...
Picture says 1000 words. Now what? JB weld until it fully goes?
No overheating, but slightly loss of coolant from expansion tank.
Where to order the replacement from?
Thanks in advance..
This fandangle radiator comes with some precautions that are amusing to me, hence my questions!
Have any of you done the electrolysis test using a DVM per the yellow sheet? Did y'all run a ground wire between the axle housing and transmission to the chassis per the yellow sheet?
He wants a...
Chance to buy a 93’ LJ78 ($16.2k, 130k-ish miles). Read all over the forums and the consensus is the engine is going to crack a head because the inadequate cooling system, unless significant modding is done.
However, this one has been upgraded to a 3L, radiator serviced, EGR delete. Overall...
Looking for radiator support grommets and radiator support tube alternatives.
SOR has the grommets (#85) - $20 for a set of 4 and the tubes (#86) are $6.
Someone has to have come up with an alternative that does not require $26 for 4 rubber washers and 2 plastic tubes
This nickel and diming...
Anyone have these handy? Looking all hardware used to support the radiator: the 'ears' on the sides, the bolts with the big rubber washers, the flip-top isolators, whatever else there might be... TIA!
Yesterday my lower pipe to radiator hoses blew a hole and leaked most of my coolant. I figured I might as well replace all of the radiator hoses. Can someone direct me towards the best way to buy them all? I have seen kits with just the three large hoses, kits with the three large ones plus...
So I'm knee deep in my rig refresh project and pulling the radiator, and got looking at my now disconnected transmission lines. Wait, WTF? Someone before me has got the ATF fluid running from the transmission into the radiator, then out of the radiator and into the power steering system, through...
Looking for a radiator core support for my 84’. Prefer one without rust and straight, unlike the one I currently have. I’m in Arizona and willing to pay for shipping.
Never felt like I’ve been dragged through the mud like I was today…Remove and replace radiator along with upper and lower hoses.
Radiator was cracked and it had to be done, but at what cost?
Replaced with Denso 42302. Hoses replaced with Napa parts. The blows keep on coming —when I checked...