oil

So I need to replace my 97's oil pan gasket and I'm a bit confused on the part number. It appears to be 12151-61011, but that part seems to be from 91 to 93. Can anyone confirm? Thanks, Dan

Actually I take samples every time I change the oil. I'm pretty happy with the results. I didn't plan to go as long as I did. Total miles on the LC - 187,880 at the time of fluid changes. Here's what Blackstone Labs says about my fluid changes. Engine Oil change with Mobil 1 at 12,436 miles...

A question for the group- I'm in the process of pulling my 97 80 series engine apart for a rebuild. Before I pulled the crankshaft out I noticed something that I thought was strange. Once the timing cover is off the crankshaft has (from front to back) a timing chain gear, rotor "gear" read by...

I have leftover 'oil' decals at a special price to help them sell. (4) colors to choose-- Price is only $9 per sheet of (10) decals including shipping. These are 2" diameter + UV coating. Feel free to PM me or respond with questions. Write your instructions in PayPal notes: (both payment &...

Wondering if it's common practice to use a new oil plug gasket every oil change? (FJ40) I don't on any of my other vehicles but now my 40 is marking his territory again and is subject to banishment by the queen!

I am currently doing my no. 1 oil pan FIPG gasket on my 1993 FJ80 with the 1FZFE. Does anyone know the name of or where i can find the gasket that goes between the no. 1 pan and the oil pump. in the diagram it is #4.

I have been looking at 3B threads regarding where to tap oil pressure/oil feed from for a turbo. at the moment all i want is a second oil pressure gauge and future oil feed. a lot of threads are for 40 series where access is available to the factory blanked plugs forward of the stock oil...

How long do you wait after the engine has switched off to check the engine oil? Manual states to wait a "few minutes" I do it at 5 minutes others at 3,10,8...etc I don't think it makes much of a difference I'm just curious.

Recently I got an oil sample result back that shows excessive wear. Chromium.. iron.. copper.. etc. Pretty much discounted it. Talked to Blackstone and they admit it could have been mixed up with someone else.. but highly unlikely. The LC has 109,000 miles.. sounds perfect.. gets standard...

Does anyone have the torque specs for both oil pans for the 1FZ-FE? Or know where I can find these, my repair manual isn't much help and my school's All Data also doesn't have it either, so I figured I could ask ya'll

Well... I just added the last quart of oil to the LC... except it was Mobil 1 transmission fluid :bang: I didn't even know I had a quart of Mobil 1 transmission fluid but that's what it says on the container... expletives deleted... crap... whatever... I know i have to drain my brand new oil...

Hello all, I have a 95 with 150k - runs well - good compression and yet I have that lovely chocolate milk frapuccino crud in my radiator and overflow. I took apart and checked the oil cooler - redid seal and pressure tested. All good. Still oil in coolant. Then got the head gasket and all that...

SOLD. 24 volt oil pressure gauge used 40$ plus shipping text

SOLD 24 volt oil pressure gauge used 40$ plus shipping text

So I have had nothing but trouble with my regear (Nitro 4.56). I had it done about 2 years ago and it had lash and noise. I had the front redone and when they got in there they noticed it was setup all wrong, with wrong carrier bearings and the gear was overheated. The new shop took a long...

I'm driving a 2015 76 landcruiser with a 1HZ with 43000 on the clock, it has a small aftermarket turbo Here in Saudi Arabia, Castrol sells a heavier mineral oil 25w 50 which has 'viscous boosters' (additives) and it promises "up to 2x engine life" on the container. It claims to keep sludge and...

Looking for a 2H Oil Pan. Has to be rust and dent free Georg @ Valley Hybrids

hi guys ..can anyone tell me if theres anything special about the banjo bolt for the turbo oil feed ..is it restricted ..(small hole size ).. thread size =M11x1.25 ......I think? thanxs in advance

help I was tightening bolts underneath my lx then al the others were tighteneing well But this one broke now what?

Hey all. I've been getting a bit of oil in my coolant system for a few months now. Had it flushed. Now there's more. Anyone seen this or had any experience with it? Kinda freaking me out...