hello everyone
i just finished working on a 1hdft, now need help with the vacuum lines
this is a non EGR system, i have searched a lot couldn't find anything :/
a disgram or picture would help loads!
thanks in advance
My tcase output seals need replacing in a bad way, I'm 6 days out from lonestar toyota jamboree, and have bought the wrong seals, my Internet searching has not been fruitful. Any help would be greatly appreciated. 85 fj60 with a 5 speed installed by pre vious owner.
I'm attempting to service the front axle on my 79 FJ40 but I can't remove 2 of the 4 cone washers that secure the steering arm. I've tried tapping the housing with a hammer, heat with a torch and liquid wrench. I can't get them to break free and I can't get the steering arm to budge with them...
I'm trying to find a BBQ grill that will fit inside the slide-out kitchen I'm building.
It can be no longer than 22", no deeper than 16", and no taller than 9" to 12". The height is negotiable because the taller it is the smaller the drawer underneath it will have to be, and there's not much...
Hello Everyone,
My apologies for not being more proactive with posting (especially pics) as I have had a lot going on in life.
I have a 1991 Land Cruiser with 333,000 miles on the clock and have put 250 miles on the tank since purchase. I have replaced the battery, the alternator looks to be...
Ive been on here researching 100s and 120s for the better oart of a year and aggressively searching for 100s up and down the east coast for a month. most are seemungly good until you look under them and yesterday i saw one thats a little over budget and not sure if ishould pounce.
Details:
06...
Good afternoon all,
I recently have an accident caused by other driver, but the insurance concluded that its 50 50% fault, hence it will cover half the cost of damage. I plan to buy and fix parts on my own rather than going to body shop in order to fix everything within the budget.
However, i...
I live in Plano, TX. I am in need of some brake (all drums) work. Who do you recommend I can take my FJ to. The last time I had work done was by Yung in Garland. He very reasonable and could fix anything!
Thanks,
Tom W.
I bought this stock 1974 FJ40 woth original paint (except the white roof and front bezel that have been repainted), motor, working smog equipment, etc.... It came with the roof rack in the pictures that I am going to sell. I have no idea how long it's been on the truck or its value. Anyone have...
hello, I have a 89 fj62. I am having a little trouble diagnosing my problem.
Ill start off by telling you what is new within the last 2-3k mikes
head rebuilt all OEM parts
injectors
fuel pump
filter
fuel pulsation dampener
pressure regulator
intake coupler off throttle body
adjusted kick down...
Hi,
My FJ62 has A/C that isn't working.
AC Dash button: operational and illuminated
AC fuse: good
AC clutch: not engaging.
The pigtail wire isn't delivering voltage to the clutch electromagnet.
I need to know what other switches exist and where they're LOCATED in the system, so that I...
Hello everyone. I'm having trouble with the tailgate on my 91 LC. The lift gate handle is broken and I'm trying to replace it but I'm not sure how to get to it to remove it. I was able to open the loft gate and tailgate from the inside the removed all the covers to access the inside of the...
Hey everyone,
I'd like to get an ad in Toyota Trails for our swap meet September 23rd. We can get a half page ad free for the next 3 issues but I need to get it in within the next 2 weeks. As long as we can get someone to commit to doing this I'll ask Stan to reserve a spot for us. Please...
hello there
just got another 2K14 LX570s and am planning to add a 315 on the OEM 20" wheels but I was wondering if it will fit without cutting...etc
cause I don't want to do what I did for the LC!!!
Hi,
I'm new to the word of Land Cruisers. I need a rugged and dependable vehicle with a lot of space for passengers and/or cargo.
I have 15k to spend so I'm looking at an older model. For my money it looks like I can buy an early 2000s LC or LX470 with between 150k-200k. I've noticed a...
The other day I replaced my battery and battery cables with the kit from fourrunner. While replacing the cables I noticed that the previous owner had cut out the fusible link and had the red, black and white alt wire directly wired in using a wire nut. I cut that out and ran a ten gauge wire...
I am very new to this website and forum. I have reviewed many threads and y'all do some awesome things to your land cruisers. I would love some input/opinions on the best way to convert my 1998 Land Cruiser 100 to a bad ass arctic truck.
Recently I took my family to Iceland and we were amazed...
Hi,
Today I´ve notice that were to mount the torsion bar on the axle not are 90degre. Im doing a RHD/LHD conversion and I have to fabricate a new attachment on the other side but I want to make sure that I´m doing it right.
Does anyone know ?
hello nice to meet you ,my name is Miltiadis and i am writing you from Athens
i am trying to work on a project and i need a little help
i am trying to make a kind of scaled sculpture...
the only things i have in my hands now are the two pictures below
here in Greece there is no way to...