motor

Anyone have one or two of these? I know the thread is super hard to find so not sure I can duplicate. Part is the brass tube that carries the output shaft on early 40 wiper motors. Someone cut one short

Hi guys. What do I have here? Scored a pair of early motors I want to fix up. I am wondering if I have a mismatched pair LHD and RHD? I was reading this thread and I am still confused: https://forum.ih8mud.com/threads/some-info-on-early-wiper-motors.791446/ Wiper 1 Slotted screws (??) Smooth...

i replaced my drivers window motor(without removing regulator) and now the window goes down fine but when going up it goes all the way up and then down 7-8 inches. tried disconnecting the motor both window up and window down to no avail and the same when disconnected battery. i am assuming this...

I've had good advice so far for my sortie into the world of the BJ40. Thanks! If anyone from around the world has a source for proper filters for the 3B motor, I'd be grateful. Thx

For my 2001 LX470. I'm about to buy a set of these: https://spartanpower.com/product/jumper-cables/ But what AWG is required? I think the 20 ft ones would be more useful, and then I'm looking at a voltage drop calculator: https://www.calculator.net/voltage-drop-calculator.html But I don't...

So I have a 1986 fj60 that I really love. The interior has been dynamatted and all the upholstery has been done. However I went to drive it yesterday and smoke was just pouring out of the tailpipe. I got out and checked and sure enough there’s oil buildup in the tailpipe. I had been planning on...

I have my drive train and block assembled but once the transmission and transfer case are not supported by the transmission jack it rolls and not sure how far it will go. Even when just lifting the gear boxes with the transmission jack I need to use the floor jack under the output side of...

Hello friends. I'm looking for a complete transmission with gearshift and handbrake part for my FJ28. It could also come with a motor. The part with the handbrake broke off on my part. It would be great if I could be helped. I'm also interested in parts of an engine. Likewise in a synchronized...

Hello all, wondering if any fellow diesel owners have ran across this issue concerning the motor cutting out and stumbling like it’s being fuel starved or running out of fuel. It’s a fj40 with the 12ht motor swapped into it. The problem occurs every time it’s being driven for about 10...

Slight correction for those who have seen my previous posts this 40 series is a 1968 model though I think 68 and 69 are probably identical, moving on. I am trying to get the wiring done for the wiper and washer motor and completely fumbled by not taking pictures as soon as I removed the...

FJ40 Ac blower motor - $75, needs brushes Pulled from fj40 oem ac unit 720-975-3767 FJ40 ac dryer - $40 brand new

These two functional and collectible pure silver key blanks are from 1972. They were designed for Corollas and Celicas and can actually be cut for use (if you choose). They'll work in some Land Cruiser ignitions also. The fourth picture is a comparison of the blank to a cut Land Cruiser key...

I am rebuilding my 1982 2F motor and I hit my crank journal with my piston connecting rod creating a small divet … ugh. Anyone have a crank with polished journals and standard size (not grounded)? I prefer not to pay for shipping due to the weight so something local in SoCal.

Note: This is applicable to 80-series rigs as well, depending on the market. Since Toyota has been making this motor since, well - basically **forever** (in vehicle years), I was wondering if there are certain years or production runs in certain factories which are notoriously good or bad...

Lookin for the switch cover for this wiper motor. 1972 fj40

Hi All I'm looking for front wiper motor in good condition please.

Jesus Christ. Please help. My drivers window stopped working, so I replaced the motor and regulator this evening. After that was done still, I could not get any movement even out of the new system. My window was stuck down in the winter time here, and I was in a bit of a panic, because I am...

Haven’t offered one of these for a while. I’m still in the school of thought every Land Cruiser in existence needs one. Measures about 14” x 8” x 3”. $75 PayPal F&F please, and that includes shipping to the US.

1974 1.5f motor carb with all plumbing and air filter houseing and distributor., $300. No shipping, Kelly 661-947-1514

Hoping someone can help me with this one. Somehow over the last 23 years the two fasteners that hold the back plate for the blower motor resistor on my ‘89 62 have gone missing. Never notice it until I go to move temp from cold to hot this time of year. The loose plate and resistor keep temp and...