motor

Wondering what the parts needed are, who we get them from to swap in a 1998 3.4 into a 1988 4 runner. If anyone can chime in great ! links to stores that supply needed parts. Photos always welcome !!

Hey all. I bought this crate with a complete 1f engine (F222837)(1967?). It spun a bearing and the owner went with a sbc. Picked crank up at machine shop, was told it needs .040" bearings. Looks to all be here. I have no use for it, but couldn't let it go. Do I part this thing out or sell as a...

Where do I connect the single lug (armature)at the end of the motor on my '77 8247? Replacing solenoids with contactor.. Contactor has the 4 lugs ,pos and neg to battery then the other two to the f1 & f2 lugs on motor. I've checked the diagrams on line and still don't get it. Where the heck do...

Hey mud, As the title says, I am looking for a wiper motor, actually for my neighbor, he has a 95. Anyone? Thanks, Joel.

Hello. I am looking for the driver side (left) rear motor mount bracket that would have bolted onto the 3 speed bellhousing, plus the 3 required bolts. I actually need the 3 bolts for the rear right bracket as well. However I need them in the mail on Monday. What size are the three bolts?

wiper motor fj40 fits 1975-1977 with mounting plate$150, plus shipping . can send pic if you send messenger info.

I'm looking at a piece of equipment with this 220v motor. I'm assuming this is 3phase but don't really understand the delta/YY thing. Am I going to be able to run this off a typical 3ph rotary converter?

I bought this wiper motor cover several months back for my windshield frame swap. This is the earlier small version. I ended up needing the later model that’s larger. Nice shape original paint I believe. $60 Free shipping

Where can I get the really small rubber plug that goes in the center of the wiper motor cover

My 09 LX570 has some tailgate closing issues. It comes about halfway down, but then bounces a bit and starts to beep, then opens back up. But occasionally it does work as advertised, and comes down as it should. I've lubed the hinges, greased the (accessible) gears by the lift arm, and have...

Looking for just the motor side for my 1970 FJ40. Will consider complete and non-working as long as the drive gear that engages with the motor worm drive is good. I'm based in the UK but can provide a postal address in the US if yu're not able to ship internationally. Thanks :-)

So I have been working on a 1HZ/H55 swap in a South American FJ73 . As the wiring harness looked more like a decomposed rats nest I pulled that out and swapped a complete 24 volt euro spec hzj73 witing harness in it . I looked at all my best 24 volt electrical parts for this and put in new...

I have for sale a NOS NIB FJ40 wiper motor $450

1983 FJ40 with AC. The union pipe has a bracket that looks like it's attached to the motor mount. There looks to be a rubber fitting pressed in to maybe the motor mount that the bracket mounts to. The attachment broke. What part or parts would I be looking for?

I've got plastic broken away around the fresh air intake on my '76 FJ40 blower motor housing. I know it's not that critical since it just draws fresh air from the vent on the side of the truck and won't be visible, but this is a complete resto, so I'd like to get it right. Anyone happen to have...

So, I have a 1976 FJ40 that I bought in June of 2000. Right after buying it, I bought a hard top from a local 'Cruiser shop and they said that the engine wasn't running right. Long story short, it was in need of a rebuild. I pulled the 2F out of the engine bay and took it to a machine shop...

Looking for a Mechanic for 1972 Fj40 with existing chevy motor clutch change within the North West Alabama area. Thanks in advance.

It appears that the PO replaced the windshield frame on my 1978 FJ40 with an older frame. The rig was rolled. I have the wiper motor and the cover, but mine is wider than the holes in the frame. Will the motor for the 78 work with the older frames? The holes on the motor mounting plate line up...

I've been wanting a Tundra ever since they came out and finally got one. The truck is a July 07 with a motor issue in the 5.7 Toyota said it needs to be changed. I found another 5.7 from a 2010 and dropped it in to find we had no reverse, Now it has a used trans and runs kinda good. At 60 and...

Looking for carb hat. Please PM me with proposed price. Thanks