installation

  1. bloc

    13-15 LC LED fog lamp install

    Hello all, Us 13-15 landcruiser people don't have any really good bolt-in LED fog lamp options due to toyota using a larger pattern for their mounting brackets. The same year LX has a compact assembly that is shared with other more common toyotas and as a result the LED manufacturers offer...
  2. dovetails

    USR Tail Lights don't snap in?

    I can't find anyone else with this issue on the forum, but I'm wondering if someone can shed some light on my issue. I received my USR tail lights today (20032009 Lexus GX470 JDM Style Matte Black Housing with Light Smoke Lens LED Tail Lights -...
  3. C

    79+ Seatbelt Location

    I'm in the process of installing seats in my 9/79 FJ40 and I'm using Planted brackets - the seatbelt buckle feels like it's out of place, it's bolted to the inner most rear seat bolt. Is that correct? Can someone post a picture? I did a search and couldn't find anything. Thanks! Here is what...
  4. 7

    Distributor dedicated ground

    I’m in the process of installing a new distributor. It has a white wire “dedicated ground” that runs to where the coil is mounted on the right wheel well. I have plenty of wire lead, where is the best (cleanest/stock ) installation to route and connect it to the vehicles ground? Thanks, Sam
  5. geo5

    GMRS Radio Installation - 12/12 club Meeting - Vehicle Needed!

    Yo Y’all- Looking for a club member that needs a Gmrs radio and is available to have it installed in their vehicle at our December meeting 12/12. Club Sponsor Right Channel Radios generously offered a free Gmrs radio and in-cab installation at club picnic in September, which I was lucky to...
  6. mrtodds77

    Smittybuilt Winch Fitmit

    I am trying to install a Smittybuilt winch on my FJ40. I purchased the HFS bumper from coolcruisers which has the vertical mount holes. The X20 10K winch is a little long but can still fit between the rails but I either have to cut or ditch the triangle shaped bumper support brackets. Underneath...
  7. Lifelong40Fan

    SOLD  New FJ40 22 gallon auxiliary fuel cell

    Brand new plastic auxiliary fuel cell 22 gallon auxiliary fuel cell and all the parts needed for installation. $550 plus shipping. Located in Jackson, TN, 38305.
  8. OKMattezai

    Beginner Looking for Some Advice About Driveshaft Damage

    Hi all, I bought an OEM rear driveshaft from a Toyota dealership online, shopped around for the cheapest price and they offered free shipping. Also ordered some of the installation nuts for it. Well, I got the package yesterday, nuts weren't shipped, and the driveshaft was in one of those long...
  9. kevin in okinawa

    Who amongst us has a WTO Redneck Ram installed?

    I need to have the gear box rebuilt, it's leaking badly now. I was considering the 80 box with a 105 sector shaft but then realized I need to get a RHD box and that is not going to be affordable...at all, lol. Now, I am thinking about having my stock 61 box rebuilt by WTO, ported, and use their...
  10. ChilaMan

    LX470 Alternantor mystery bracket

    Good morning folks. ITS ROAST TIME!!!! So I changed the alternator on my 2000 LX470 yesterday. Normal issues finessing it out from bottom. Not a big Deal. But, for the life of me, I cant place this bracket!!! Let me have it people!! I know there's a lot of gurus in here that won't hold back!!!
  11. Anvil

    Fridge question

    I'm going to install a 58 quart fridge with a sliding rack on my drawer system in my 1997 80 this week. What is the preferred side to mount, driver or passenger? The lid will open from eaither side, so that's not an issue. I go back and forth, and can't decide. I see good reasons for both, and...
  12. stonepa

    Cartridge block heater installation

    Hello - any Canadians that can point me to a video or set of instructions for installing the Kats cartridge block heater on a 5.7L Tundra? My dealer is having a terrible time finding the tube and installation instructions are no longer included in the FSM.
  13. 2fpower

    Installing Viper alarm in a 70 series

    Didn't find much out there about wiring up an alarm on a 70 series, so thought I would make a thread as I figure this out as well as post links to very helpful threads. Specifically, I am doing this on Inigo, my Unicorn, 1992 BJ73 Spain assembled LC. LHD I am installing a Viper 3400V system...
  14. J

    Weber 38 DGAS kit Man A Fre

    Wondering if anyone has done a recent install of the Man A Fre Weber 38/38 kit? I have a 75 FJ40 and ordered a kit for that year. Any issues with the installation or lessons learned? Looks pretty straight forward and I figure my jetting will need some work.
  15. Gub67

    Tires - 1983 BJ40

    Just imported a 1983 BJ40 into Canada from Italy. I am interested in installing new tires and possibly rims. Vehicle has the original rims now. Preference for the tires are 33 x 10.5 R15 BFG K02’s. There is no lift kit installed now. Looking for thoughts / guidance / suggestions about the above.
  16. sleepycruiser

    Best way to tap into the blinkers?

    I want to install the ClearView tow mirrors on my 2011 LC. The version I want has the blinkers on the tow mirrors, however my OEM mirrors do not have that option. Where is the best place to tap into the blinkers? At the blinker or are they run to the DS kick panel? Then I’ll need to figure out...
  17. crobson

    Huracan Fabrication Tailgate Storage Installation

    First how to/install thread, so please bear with me. I Learned A Thing! It may take a couple days to get this all up, please let me get it all up before adding any questions or comments. I’ll edit this out later(Left in because I learned something). - It was recommended to me to reserve...
  18. RedComet

    92 FJ80 - Corbeau Seats Installation

    Hi all just wanted to jot my thoughts down after installing my Corbeau Moab seats into my 92 FJ80. FWIW my rig originally had the cloth manual seats and I'm looking to get rid of both. #1 The Brackets they provided are not quite 100% drop in fit and needed some encouragement with a pry bar on...
  19. B1oodyBuzzard

    OEM AC installation instructions

    was wondering if some one had instructions for the Air Con kits CCOT sold? Most of my searches have come up with a variety of ac options but right now I’m only interested in OEM style.
  20. F

    Radiator support

    In the process of installing a new radiator and all the bolts are rusted/snapping. I’ve seen the metric overland kit that has all the bolts but is out of stock. Does anyone know of another source for the bolts besides the dealer?
Back
Top Bottom