hub

Hi all, Hoping to get some guidance. I have 19 Premium, 37,000 miles which has been diagnosed with a left rear bearing failure by the dealer. I've been chasing this one a while.. Humming noise starting around 30, gets worse at 40 and up. Since the car is Certified Pre Owned, I took it to the...

I need to replace the dial selector for my Aisin hub 43530-60042 (MFG PN: HUBFHT002). I'm looking to see if anyone has a broken hub that has the dial intact and is willing to sell it as a part or complete package.

1993 part time converted fzj, locked and modded (see signature for full deets) So in June 2022 I completed the part time conversion, Aisin Gold Hubs, spool etc. I believed I had/have the shorter earlier birfields so I thought everything was fine. Anyway this last Sunday we wheeled Spring...

I have a 2006 Cruiser that I’ve changed the front rotors on and in so doing, stripped one of the bolts that attaches the rotor to the hub. There are five bolts (number 10 on the head) and I cannot find the OEM PN. I know it is an easy one for most of you but I’m pulling my hair out. I called the...

I am tearing down and rebuilding my front axle. I am upgrading hubs to IFS hubs. I plan to use frontrange caliper bracket (that is if they ever answer the phone). With that said, which year and model brake calipers are some of you guys using? Thank you

My 93 came with a set of manual locks They aren’t installed yet, but I’m thinking of putting them on. What’s the consensus on wheel hub manual locks? Pros/cons? I haven’t found much info on the forum regarding them, but I could be using the wrong search terms. Are they difficult install...

Has anyone installed an aftermarket steering wheel and hub on a 100 series? I got this Boss hub for Lexus to retain cruise control and install a well matched Momo wheel to replace my cracked OE wheel. For some reason with the aftermarket hub/wheel installed my ABS/VSC goes insane and ABS...

I thought today was going to be a good day. A few things were delivered for the 40 and I was anticipating a nice productive afternoon with the install of the items. Mainly, OEM hub caps. My 40 came with 16" wheels and when I looked at purchasing HCs there was no info on size. I figure they...

Looking to source the electric motor and brush holder assembly for my electronic hub lockers. Only able to find the whole hub assembly from any part importers. Only need one assembly.

Is it just me or does the wheel hub stick out really far? It looks as though the hub is flush with the fender lip. Am I the only one seeing this.

Bought the rims and lugs from my local dealer and turns out the center caps are on backorder. So I have a set of sweet new rims and no caps for the time being :( Anyone have a set of 4 they want to sell? Attached a pic from another site. Thank you!

This set was installed on a 200-series for a week. It pushed the wheels out and created some rubbing issues that I don’t care to treat. $285 shipped for the set of four.

The problem: front hub caps don’t fit for the 100-series/LX470! Problem solved thanks to @Delta VS

Interesting mechanism here (I'm not 100% on how it works but seems to make sense). These came on my Ecuador FJ40 and from what I've read, they were produced by AVM in Brazil under a "handshake" license from Warn. Sounds like they didn't last that long and both AVM and Warn went away from these...

Looking for acorn style hubcap, front, just one, no repop, a used one with some character to match the other. Thanks in advance. Mark

We got the hub kit from trail-gear mainly for the felt outer seals, which are great. However, I've come across a problem when installing the hub. The seal isn't centered on the bolt circle. I've only done one side so far. And will probably drill our the holes in the other side to allow it to...

Does anyone know what you need for an automatic to manual hub conversion on a 1985 pickup? so far I have the two Aisin hubs, and two spindle nut kits and because my axle didn’t have a snap ring on the end I have to get two of them I’m assuming? Is the snap ring called the front axle inner snap...

For those of you with 2016+ LX570s. Can you do me a favor? wiggle your center caps around, are they loose and move around? Or are they tight and firm? All 4 of mine wiggle around. I have removed them, inspected, no broken clips, they all look fine, but they still are loose when installed. -

I was doing some searching found a few fan clutches out of 93-94 vehicles, but wanted to see if anyone had the “black hub” model number or part number to reference? There is a parts truck here locally wanted to make sure it was the right one n reference photos. Or if any has the aussy model...

I’m having a heck of a time getting the preload dialed in. Long story short…. Completely rebuilt the knuckles… set the preload like the manual says, works smooth with 3lbs. When I put the locking nut on and set to 58ft lbs, now the preload is around 9-10 ft Lbs and out of spec. One printout I...