help needed

Anyone seen something like this before and know what it is used for?

Hey y’all, hope everyone is good on this fine Oct day. So I have a misfire that has me stumped, I’ve chewed through every misfire post mostly on here and even some others with vehicles that share my engine (2uz in a 2000 lx470). I’ve got a rough idle, regular throwing of a p0304. Weirdly it...

Hopefully a quick question, my 84 FJ60 has high CO‘s at high idle test. I’ve rebuilt the carb, adjusted the valves and timing repaired the AI system, new plugs, wire, cap and rotor, verified no intake leaks. Adjusted the carb while on the sniffer. I was able to get HC’s and CO’s in spec at idle...

I screwed up. Rebuilding my 83 FJ40 carb and didn't record the numbers on the long slow jets. One is #65 & other is #90. Need to know which is Primary and which is Secondary. Don't know if it matters but I'm at 5000' elevation. Thanks, Jim

Hey guys - we have a 2003 LX470 that my wife drove to Asheville to visit family. I am worried the catalytic converter on it may be toast. Is there somewhere in town that she could get it looked at on the weekend? I'm worried about her potentially driving it home - two kids with her too.

Hey y’all- new to the Landcruiser life. Picked up a triple locked 80 Series yesterday (‘94) anticipating a project. After driving for about 10 minutes, I noticed a whining sound when hitting around 25mph. It took no time for this to turn into a horrible grinding/ rattling sound. Sounds...

Beach n Toys group I reached out to Frank? And he suggested that I post this here. I am reaching out to this group because your the experts in San Diego and I have a FJ40 build in my garage and need help getting it finished. It’s close but I need help wiring the rig and getting correctly setup...

Hey everyone, I am putting my Instrument cluster back together and I can't find the small part that holds the needle of the temp gauge. I must have dropped it before it made it in to my ziplock but now I cant find it. Any ideas on how I could make something that will do the same thing or where...

I found these 2 plastic covers in the back of the LC200 when I bought them but have no idea what they do or where they go. Help, please.

Hey gang. I paid someone to retrofit some HID projectors into my 2002 headlamps, and they didn't do a great job. In fact, they did a really, really bad job. Aside from a half-melted tab and scratched shrouds, the headlight housings no longer adjust up and down, OR right and left. I suspect it's...

for some reason my 80 randomly died out on the trail. Miles out of town in the back country in Kentucky. Thing has been doing great all day. Randomly died and won’t start back. Alternator is good. Tried to start back and then just lost it. Could use some pointers. I wonder if it’s the fuel...

Will any other LC models and years front grill replacements fit? including this one FRONT GRILLE FOR TOYOTA PRADO J120 2003-2009? or do I have to go with an LC100 OEM and powder coat it black? TY

Looking for help from the Land Cruiser think tank. I have a 1979 FJ40 I am restoring. When I bought it years ago the carb had been swapped out for a rochester, it had been desmogged. It had a coil only - no ignitor that I can tell. There is a chance I removed it an misplaced it last year when I...

Hey guys, My brothers 1999 100 series randomly shuts down when in drive. It happens in High and Low range. When stopped in traffic, on a trail, or most recently just when you let off the throttle on the highway (current location). CEL and A/T OIL TEMP come on, and the red battery in the left...

I've run into a bit of a problem, the hood lock for my cruiser (53510-60020) has broke and been discontinued by Toyota and I've had a lot of trouble finding a replacement part for my truck. Any suggestions on where I can find a replacement and or solve this problem another way?

Greetings everone, new to this forum, I bought my 01 lx470 truck a year ago in New York, drives smoothly, did a minor repair and now has 198k miles on it, the previous owner keeps and maintains it very well, and everything looks like new. However, I was pulled over by police a few months...

Hey guys, I searched the forum by the best of my abbilties but couldn't find anything related to my question, if there is already information about this please let me know how I can find it :) I am working on getting all parts together to get the interior of my LX450 to where I want it to be...

Help! While changing the coolant temperature sensor on my 1991 fj80 3FE, the stiff old wires easily fell off the connector. I have a new pigtail with completely different color wires ready to go. I need to know how they were originally on the connector- red-wht and brn-blk. Unfortunately they...

Forgot to seal/do anything to OEM roof rack bolt holes about 8 months ago after rack delete. Yes I know, probably one of the stupidest things anyone could do. ( I'm a high school student, please spare me the hate I know how stupid it was to forget about something so huge) Anyways, Id like to...

To start, I have a 1999 Land Cruiser 100 series, a little over 200k miles. Last year, one day my dad was driving (now my truck) the land cruiser, and the brakes apparently were completely shot. I don't know if it did the screech of death or if he had the 5-6 pumps before hand until they...