help needed

Is anyone local to London Kentucky and willing to help me work on my 1986 fj60? I was recently in a motorcycle accident and I'm not 100% yet and I have all of this time, and I don't want to waste it. Therefore I want to fix my yota is anyone close and available to help?

I have been doing some work for my neighbor on his fj40, he claims it's a 1976 and the axel/knuckle hasn't been messed with at all. The knuckle was completely busted with studs broken off and holes screwed up beyond repair so I bought a refurbished one on eBay for a 75-78 cruiser and the studs...

Hello all, I recently started the process of replacing my front driver wheel bearings, seals, etc on my 1996 Lexus LX450. Watched a couple tutorials, figured it out and it was smooth sailing. However, when I went to rebuild the thing, I discovered that the OEM grease seal I bought from Toyota...

Yesterday my 100lc was running very rough and I got a cel for a cylinder 8 misfire. I thought I would just go change the coil but when I went to change it I found the cable that connects to the coil was very loose above it where it connects into the wire harness. I pushed it black in and the...

I'm sorry if this is already a thread but I've looked and i couldnt find it anywhere. So here it is: I just bought some used 285/70/17 AT tires but the 2001 LC comes with 16" wheels. So i figured id be fine and just get really cheap basic wheels, as long as they were 17" 5x 150s right? Well...

I’m new to Toyota and my surf has been awesome so far, however: when starting cold in the morning or after sitting all day at work the engine runs real Rough and misfires. Once it’s warmer and I’m driving. It runs flawlessly. supposedly it has: new injectors, glow plugs( I will be checking...

Okay, I know this has been covered in hella other threads (and please don't flame my newbie ass) but I have no idea what those say, so please hold my hand super tightly (I mean really effing tightly) through this process. I got a 2000 LX470. When I put the car in drive or reverse with central...

Ok, first post on this site. I (my dad) have a first-hand, dealership-bought 2000 LX470 with 113k miles on it, everything is all well and good until we get to a speed bump in the road, if I drive over it going anything above 10 miles per hour, the car bounces HARD and you can hear the front...

Hey guys, the fan pulley recently was toasted and I decided to do the timing belt and water pump as well. I am unsure what to do at my current step and want to make sure before I mess something up. I have turned the crank to where the cams align, but you can see the balancer is advanced. Should...

Today I decided to repair some things and I found this transmission oil leak, someone knows how to repair it. that is one of the pipes leading to the front of the vehicle

Someone suggested I post this here as I had posted it in the chit chat thread. Hey guys not sure where to post this but I thought I would post here. A couple years ago I found a rolling chassis FJ60 down in Idaho that I plan to use for a diesel swap. Being that I live in Canada I was not able...

Hi everyone! I have a LJ70 with a 2LTE engine. The connector for the brown correction resistor on the injection pump body has cracked and the wires are broken off due to old age, causing my engine to surge badly during idle. The idle surge issue goes away when the wire temporary connects back...

Hello all! I am looking to buy a new FJ. I sold my '89 a few years back, and want to own a truck again. I am looking for some insight regarding 100-series cruisers and what to look for when buying one. I've looked through the Classifieds here, but most of the trucks are in too good of condition...

Hello! I'm interested in a 96 80 series cruiser located in Middleton WI. I live in Minneapolis and had no experience with these vehicles. I talked to one of my friends who's very knowledgeable and he didn't find any deal killer. I'm wondering if anyone local is willing to do me a favor before I...

Hey guys, I know there are plenty of threads about this issue, but I am really just trying to source the right part. I have a 1998 LX470. Ebay sells a ton of them but they all seem to be stamped “7853B.” My understanding is that this part will not work and that it is for the LC with the manual...

I have a 1991 FJ80 with the 3FE engine. The car will easily start cold, and run flawlessly. But when it gets to operating temp, and I shut it off, then it will crank but wont start. When it does not start, it the tach doesn't even wiggle like it does when it does start. the only solution I have...

So on this nice bright beautiful Saturday I finally had time to do the front knuckle rebuild on my 62. i start tearing it down and jamming out to some music and taking my time and putting parts in aside in order so I reinstall everything in reverse order with ease. Well that's when 💩 hit the...

Hi all, I'm driving from Virginia to SoCal. I'm looking for a passenger side fender w/molding for my green (preferably, any color will do) 1999 land cruiser. I'll be driving through TN I-40, AR I-30, Tx I-20 & I-10, Az I-10, does nobody has one for sale that I can pick up in my way home? Or...

hello all, i wanna go a v8. Im thinking of an LS, not sure which one but i have to daily this car so id like to try go something with alright economy. I have a few questions if could help me out that would be unreal. 1. what type of fuel economy would i roughly get with a LS 1,2,3? (running...

Hey i own a 2000 LC. The piece above the running boards is all bubbled rusted and wondering best option about fixing it. Should I take it to a body shop and spend all the money to get new piece welded on. Or should I strip the paint sand it down and spray a bed Liner paint or a rustproof paint?