I mangled this Heater Inlet Pipe changing out my Heater control Valve and associated hoses.......I need/want to replace it, anyone have the part # handy, I tried to find the dang thing without success. I "THINK" it may be Part # 87208-60260, but hoping to get verification here before buying...
2000 LC 100
First Heater isn't blowing hot air, now AC MOTOR above front passenger feet is clicking like a kid riding a bike with a baseball card in its spokes.
I already flushed the heater core with no improvement.
Is that AC MOTOR above front passenger feet easy to replace?
Are these...
LINK to part out thread
Parting out a 1996 LX450 pulled dash off today
have cluster 230k? heater controls works well stereo LCD is partially damaged (cheap)
I get a few drops of coolant behind my rear drivers side tire when I do short low speed drives around town. I top up coolant once a month no more than a half pint. Hasn’t been much of a problem this summer but cool temps are coming. I took it to someone to check it out and under pressure the...
Hi All,
Recently my FJ60 has started leaking coolant into the passenger side floor board inside the cab. Must be coming from the heater core which is a big job to replace since you have to take out the entire dash. My FJ60 is my daily driver during the warmer months and I don't want to have it...
Hi, all. Sorry English is not my native tongue. Please forgive me if I don't say it clearly.
Long story short, my LX 570 had the heat valley leak problem, and It has been parking in my garage for about 2 months. Today I fixed the leak, but after I started the car, and turned the heater on to...
How often are you guys changing this out. I know it's a maintenance item but do you do it at 30k or what. I need to change the heater tees also. I guess do them both at the same time. and same intervals?
Thanks,
Working on a restoration and need a few heater duct and line parts as pictured. Thank you!
Heater line kick cover for 1978 FJ40 and Defrost Tube hanger:
Retainer clip for the "FRESH PULL" cable. Keeps the cable from hanging down (like it is in the photo above):
Thank you - please reply...
Can anyone provide help identifying the electrical connection on top of the heater unit (interior behind dash). Not the taped one.
I took lots of pics and labeled lots of parts to ensure I put everything back together properly but I must have missed this.
Thanks
Recently purchased an 07 and am doing some baselining on it but am leaving for a trip this weekend and the heater t stories have me a little nervous.
The truck has 125k on it and at 100k the PO did the timing belt service as well as a bunch of other things (radiator hoses, thermostat, water...
https://vintageteqparts.com/collections/everything-else-hardware-fsms-shop-manuals-special-teq-stuff/products/copy-of-fully-restored-warm-pull-cable-assy-knob-fits-9-73-1984-40-series
( NEW PRODUCT RELEASE )
WARM PULL HEATER CONTROL VALVE CABLE
Part # 87286-60111
Made with ALL OEM JAPAN...
Apologies in advance for my stupidity.
got a 91 fj80 3fe and have a couple questions regarding the heater control valve:
1. for the 91 its discontinued but i can find one for a 93 and 95-97 - would they be compatible for my 91?
2. is the heater control valve something that can be cleaned (do...
Just replaced my heaters servo motor assembly today and need help identifying a broken arm.
2010 Tundra DC
Back story:
Had issues with heater taking 30-40 seconds to turn on after start up, and a terrible clicking/binding of the gears during that time. Something finally broke mid winter and I...
From a 96 with a good engine and cool AC system.
$100. This is a whole lot better than trying to fit an aftermarket one in, they never seem to fit right.
I'm looking for a heater water pipe for my 1974 FJ40. This is the metal pipe that bolts to the right side of the block in between the lower radiator hose and the heater control valve at the firewall. It is circled on the attached diagram.
Thanks,
Ray
**problem fixed with second flush with next step being a coolant flush if needed**
After the car had been sitting for near a year and the engine conversion has now finished the heater has decided not to work it’s now a hzj73 so 75 series front, I’ve just done a flush (reverse and normal flow)...