When soldering the brass pipes to the heater core as many suggest to do, do you leave a gap between the two flanges for the solder to get in or do you put the pipe flanges (of the heater core pipe to the brass pipe) as close together as possible (touching)?
While not a professional plumber, I...
Hey all,
Just joined the club and bought a 99 LX470 with ~265k on it. Well, the heater core immediately started to leak. Pretty good amount of coolant in the passenger footwell... So yeah, it's at the shop, waiting to have the dash torn apart to get at that mother...
So, what else should I be...
hi guys, have been searching this topic for a couple of days now and I'm either using the wrong terminology or there is no write up on it but I need some help.
Heater hoses have started to leak and deteriorate and its time to change them. Living in the middle east don't really need the heater...
Hey guys,
This is my first thread so here it goes. I bought a 1997 FZJ80 land cruiser a little over two years ago, and it was totaled when i found it and hadn't moved in 6 years. I've got it back to stock and more to where it's becoming an expedition vehicle now. One thing that hasn't worked...
Ok so figured there were a few threads out there about replacing the heater core and the amount of disassembly it takes to get to the bastard thing. However, there is nothing about steps going to there or thought process (what to do first) when one is experiencing issues.
Some of you may know...
So I recently did the heater Ts, timing belt, water pump, thermostat, etc. Everything has been working great since then EXCEPT, my heater doesn't seem to blow hot air unless I put it to max. =/
Previously, the digital temperature control seemed to work fine with smooth HVAC control.
The engine...
i just only waDoes anyone know part number of this 03+ toyota land cruiser heater corebox valve
(87150-60790) 's AIR DUCT
I WANT THAT TWO AIRDUCT ONLY
please let me know if you have any information to share
thnx
I am working in Spokane and brought my 94 LC 80 series up here from Austin. I have a heater core issue which may involve the nasty job of pulling dash etc. Not sure I can drive it back to LCSpecialists in Austin or not. I saw a prior thread on Cruiser friendly shops and wondering if there are...
The blend door on my 93 is apparently stuck open. There is no heat when you turn the heater on and there is cold air that comes in thru the vents during any drive in cold weather. No water on floor, no overheating. Heater valve has been replaced, just in case and appears to be functioning.
Took...
I have searched high and low and cannot find the part numbers for the o-rings and also the metal pipes that feed the heater core on my 1995 FJ80. It appears there are potentially 3 metal hoses?
I am bypassing the core for now. Can anyone help me please???
Thank you,
David
So about every vehicle I have ever worked on with a 22r/re/rte has had jacked up water lines behind the head - See the picture below of the brass lines - they always leak some and look like junk. Since I have the head off my 4runner, I would like to fix them. I had an idea about using something...
Dealer-maintained FZJ80 Land Cruiser with 1FZ-FE engine has about 100K city/highway miles. I took it to a non-dealer to have PHH replaced. They had to remove the Air Intake Manifold (upper and lower) to replace the PHH (which was bulging and leaking) with an Xtreme Silicone Pesky Heater Hose...
Hello everyone, I am a newbie to the site.
I have a 95 fzj80 and am needing to put a new front heater core in it.
It started out slow but now my floor board is soaked on passenger side.
My question is can I get a factory Toyota core or is their a reliable after market?
Heater core TU (tango uniform) and having trouble finding the core. Will heater cores from non-japanese 80's
work in HDJ81?
Any help on finding a heater core or info on an alternative solution would be appreciated.
Thanks,
Rich Boyle
!!PLEASE HELP!!
Hello everyone -
I'm a new active participant of this forum however had used it many times to help learn how to accomplish some of the minor fixes I've needed to perform on my 1997 Limited Edition LC. I've owned this vehicle for 16 years and love it and look forward to another...
I just watched this video showing a breather hose extension mod to a heater core breather tube in the firewall:
Seems like an easy enough solution to a problem I didn't even know existed. I don't see any harm in adding it to the list of breather extensions that are typically done on the 100...
From a 1996 Land Cruiser 80 Series
Location: Hesperia CA 92344
Contact: Ken (562) 881-1687 text please
in dash heater stuff
All in excellent condition, except for one box (top right in pic) is cracked, but since only air is what goes through that box, I don't doubt the pieces can be glued and...
Sorry if this has been posted already, my searches have been inconclusive.
I'm having antifreeze drip out of this hose in the fire-wall and I'm not sure if it is an overflow from the heater core, or if it is the condensation drain for the AC unit.. or if it supposed to be connected to...