exhaust manifold

Does anywhere sell this baffle between intake and exhaust? I also had some good luck getting bolts out of the upper exhaust flange so I might go and buy a lotto ticket lol. I did chase the threads, I also need bolts. Also haven't finished cleaning the surface so. Not rebuilding the outside...

I am desmogging my 1986 FJ60. Everything is coming off except intake manifold and vapor can. Everything was working as far as I know, but I guarantee nothing. So here's what's available: stock carb, air cleaner exhaust manifold, down pipe distrib. EGR system air pump, air rail (far end tube...

Hey guys, I'm looking for an exhaust manifold for my 1974 FJ40 with an F1.5 (I don't have smog stuff: no 2air, no EGR). I don't mind cracks around the runners (although I will expect a reduced price if they're there, since I have to repair that) but I want the outlet flange to be intact: i.e, no...

My 2000 LX470 had an annoying rattle, which turned out to be from rusted out heat shields. They were in pretty bad shape, considering that the vehicle has only 150,000 miles on it. Screws/bolts were rusted up, so had to rip them out with pliers. Pic attached. Here are the replacement part...

As the title states. $30 shipped CONUS. OBO.

Hi folks, I replaced my y-pipe/cat with a California spec magnaflow. I also swapped my exhaust manifolds and gaskets. The old manifolds seem to be pretty solid, so I figured I would toss them up here. Sold for $50 a piece. The cat is definitely in used conditions (213K on my cruiser) and I had...

Hey all, I am working on my June 72 FJ40, and am making slow steps to getting it back into running shape. The exhaust manifold is incredibly rusty, and I am concerned the heat riser may not be working due to the rust. I feel like it would need a month long soak in PB blaster before it would...

https://www.ebay.com/str/lermscustomsparts/Toyota-Land-Cruiser/_i.html?_storecat=33942392018 Hello everyone. I recently picked up a few boxes of parts from a 1994 Toyota Land Cruiser with a 1FZFE. Ive got misc parts like, AFM, Starter, Coil, Intake/Exhaust manifolds, throttle body, EGR and a...

Hey guys, a couple of questions regarding the exhaust manifold. I have taken them both off, and wow, what a job! This is coming from someone who has never even changed their own oil on the rig, so I was definitely intimidated. I have ordered new Toyota manifolds, gaskets, studs, and bolts, but...

I am in need of a manifold assembly (exhaust and intake) for a February of 1980 FJ40. Part # 17100-61083 or 17100-61080.

Well, it's official. The carb cleaner spray test has confirmed my suspicions, so it looks like I'm planning on replacing my IN/EX manifold gasket and all the bits and bobs associated with that. What I'm really looking for is some feedback on my parts list. I'm hoping I can get everything in one...

Hi All, I have found oil leaking from my 1hz's exhaust gasket (or so it seems) at the 1st and 6th exhaust outlets (see photos attached). I Initial thought it was the head gasket leaking or the valve cover gasket, but the more I look at it the more it appears to be coming from the exhaust...

Hello NOS Fj40 exhaut manifolds part no. 17140-60010 available for sale. Manifolds have been repainted to avoid rust/corrosion as stored since long time. 245$ shipped.

Hello friends NOS intake manifold part no. Fj25 17111-1. Manifold has been repainted to avoid rust/corrosion as it was stored since pretty long time. 300$ shipped.

I’m finally pulling together all of my projects into one place. For background I bought this rig about 18 months ago after semi looking for years. I happened to find a 1988 locally which had been well maintained and had good bones (no rust) My mission was to create a bone stock (or as close as...

Hello, Located in Florida, looking to temporarily ditch the turbo setup on my BJ60 and want an original exhaust manifold. Thanks,

Looking for F.5 engine intake and exhaust manifolds for my '74 FJ40. Send me a note if you have one to sell. Thanks!

I have an '03 with ~250K, yesterday i dropped it off due to what at the time was classified as a an exhaust manifold leak, mind you the truck had just come back from service in any event it was running very rough at low rpm and idle with the dashboard trio all light up...We have been having some...

Curious what methods you all use for removing rusted steel bolts in aluminum. I need to replace my passenger side exhaust manifold on my 100 and the bolts are extremely rusted after 17 years in the northeast. I have read through the threads on exhaust manifold removal and replacement. I...

after 10 minute run. so much for the high temp ceramic paint.