Hello,
I am replacing my exhaust manifold, I am getting the manifold from DT. I've read the gaskets are bad and decided to get OEM ones along with new studs and bolts. I put a screen shot below of all the stuff (from partsouq). Does this look like the correct items and amount of them I need? I...
Came across this twin pulse / dual exit / twin scroll exhaust manifold by Tillix performance in Australia. Toyota 1HZ Exhaust Manifold with CT26 Turbocharger Flange - https://www.tillix.com.au/product/exhaust-manifold-split-pulse-for-toyota-1hz-1hd/
Seems promising since these diesels live in...
Hi,
Just wanted to know what are the torque specs for j200 exhaust manifold and exhaust downpipes?
Tried searching but could not get. The exhaust pipes are rusted so i think there might be a leak but nothing affecting the mileage or any smell detected.
There is a slight vibration in the body...
Howdy MUDers,
NOW SELLING FOR PARTS OR $400 FOR COMPLETE ENGINE? Let me know what you need
The intake manifold is in perfect condition. No cracks. Appears to be identical to a 2F but I am sure experts will chime in. Definitely mounts up to the bolt pattern on a 2F I have.
Factory or aftermarket is ok; please square port only; 1HDT (12 valve) will not work. I could survive with just the smaller half of the manifold as well if someone has one. Cash in hand!
TIA!
Hey all.
I haven't been on here in awhile and honestly, its because my 100 series has been great!. But, that ended yesterday. I have always had the exhaust manifold ticking noise, but yesterday it started to get worse and then started sputtering at idle. I drove it for a bit and it...
I've seen a lot of complaints on various off road and Land Cruiser forums about the torsion bar set up in the front of the 100 series. I'd be curious to hear from 100 series owners if any of these criticisms are justified?
I don't really have a problem with torsion bars myself - they're simple...
I am diving into replacing my old heat damaged crumbling oil hoses that feed my remote oil filter. The PO (or PPO) crafted a "heat shield" out of a license plate. There are 4 bolts on the manifold. Does anyone have a picture or measurements for the OEM heat shield that belongs here? Does it use...
Refurbishing my engine, 4 exhaust manifold studs broke off.
Removed 2, 2 are left like in the picture below.
Started drilling, unfortunately strayed a little off-center.
What is my best option here? Bolt extractors are NOT working.
Anyone has an idea of the threads by heart for when I retap them?
Hi all,
This is my first post as a 2013 LandCruiser 200 4.5diesel owner. I was terribly dissapointed by my previous car, a 2012 Land Rover Discovery 4 which had 3 catastrophic engine failures so I decided to switch to a more reliable car. This was the original idea.
After I bought the car in...
Sprayed some brake clean as an experiement to see if it might reveal "leaks" in my manifold. Is this an accurate test, cause obviously its all dripping down out of both of these gaps, I replaced the springs that hold these in but am wondering if this thing is just warped to crap or what.
Had a...
Does anyone know what the bolt size and thread pitch for linking the factory 2F exhaust manifold to the initial exhaust line flange? If anyone has the Toyota Part#, please share! Thanks!!
I recently removed everything smog related off of my 87 FJ60. I currently have all smog components and they are in working condition. My truck ran like it should. All components have 168k miles. The manifolds have cracks in them so I'll hang onto them but everything else available. I have an air...
Does anywhere sell this baffle between intake and exhaust?
I also had some good luck getting bolts out of the upper exhaust flange so I might go and buy a lotto ticket lol. I did chase the threads, I also need bolts. Also haven't finished cleaning the surface so. Not rebuilding the outside...
I am desmogging my 1986 FJ60. Everything is coming off except intake manifold and vapor can. Everything was working as far as I know, but I guarantee nothing. So here's what's available:
stock carb, air cleaner
exhaust manifold, down pipe
distrib.
EGR system
air pump, air rail (far end tube...
Hey guys, I'm looking for an exhaust manifold for my 1974 FJ40 with an F1.5 (I don't have smog stuff: no 2air, no EGR). I don't mind cracks around the runners (although I will expect a reduced price if they're there, since I have to repair that) but I want the outlet flange to be intact: i.e, no...