Curious if there is an avenue to install lights on the bottom of a dash pad without removing the pad? I'm trying to avoid raising the top/dropping the windshield in order to remove the pad. From what I can tell, I have one of the ABS aftermarket pads that doesn't have the dash light cutout...
Missing one of the set screws for early style rotary dash knobs (head light/ wipers).
Edit - Spent some time at local hardware store yesterday, now believe the size to be M3 x 0.6 @ 12mm long. Of course they did not carry this exact size but was able to narrow down some of the questions...
OK just getting around to listing this very nice gray dash removed from a 96 80 series truck. This is in excellent condition and was carefully removed from the donor truck. All mounting tabs intact. It has the original air bag that was never deployed, and this one as a bonus has the neat...
1968 - 79 2 piece set of lower dash pads. No Radio Cuts or other cuts. All mounting pins are good. Soft and pliable I just wiped it with water So new owner can use there own protectant. $125.00 plus shipping.
This is the piece that holds the ignition switch and several other switches including the locker switch. Very nice gray panel unmolested only switch included is the dimmer switch for dash lights. Price $28 plus shipping. Best to email me shmukter@pa.metrocast.net
hey group
iIam looking to fix my dash back lighting lights. i have zero lights..I checked fuses in the cabin, all seem ok. Before I start testing wires, I figured I would ask the experts on maybe where to start first, hoping you have a quick fix....appreciate everyone's help...
Getting down to the nitty gritty here disposing of the good stuff from a 96 80 series. There's a nice cup holder, not broken it's clean $15. Fusebox cover gray nice shape $12, Clock panel with vent and clock $24, gray speaker panel with speaker $20, overhead console with light and sunroof...
Have a nice radio surround piece here has a few minor nicks but no cracks and nothing broken in the mounting areas. Comes complete with heater controls, lighter socket, and ash tray frame. Price $45. Any of the other switches are available- hazard switch $20, center diff lock $28, rear window...
Hi folks,
I have a 65 FJ 40 with the heater removed. I have this valve and attached hoses Under the center of the dash.
Can anyone identify and explain how this works?
I want to install a heater and assume this valve and hoses will be part of the project.
Grateful for any guidance here.
JB
So, I can't see my dash in the dark... I have never seen the stock dash light in person, My 55 is a 70. I do have a dash pad from a 73 so there is a spot for one. Dose it work well enough? dose it come on when you turn on the head lights? is it annoying while on? Anyone have one for sale?
I've searched the forum and can't find a definitive answer. Will am fm.86120-16111 fit the dash on a 1987 fj60? Is there a previous forum thread that lists all the radios that fit. I thought I read before there were seven. I currently have an older Kenwood am fm cassette ,which I was ok with...
the one in my truck is so badly sunfaded where the switch panel goes against the window. it fits around/above steering wheel column and goes to the left to house the switches. it is for a 1995-1997
Greetings all.
The glow plug light on the dash doesnt turn off (KZN 130 1995)
I have replaced the glow plug timer and when checking with a multimeter, there is no voltage across the glow plugs... but the light stays on.
Any advice on how to troubleshoot where the problem is?
cheers.
Hello,
getting ready to blow up my dash to dig out the heater core. Its a RHD, hj61. Now I have a ready to go heater from a LHD, 60. Are these parts compatible, or am I in for some more grief( doing this job is grief enough!)
Thanks so much!
When I am sitting in the truck, with the engine OFF, all accessories OFF, is there a way to see the time on the clock in the dash?
In a lot of my other autos, there is a button to press that will power up the clock when the car is OFF to see the time.
Thanks!