dash

Did a search and found a few thoughts on this topic but I am still a bit confused. Wiring does this to me lately the original dash panel has been replaced but the ammeter is not doing anything so opening it up reveals the wiring shorted together and I assume, as a bypass. Battery charges at...

Have a few items to sell. There's a hazard switch tagged as from a 71 FJ40 wiring is intact even has part of the main harness and connector still plugged it price $SOLD There's a hazard switch from a 75 wiring intact as is the shrunk vinyl protective sleeve. price $24. Also have a cigarette...

I have a 1995 KZJ71 and I am looking for a dash mat/cover. I have been searching all over, emailing various vendors, such as Moon Eyes, with no luck. Does anyone know a source before I contact a local shop and go full custom? Thanks!

I removed the dash to do evaporator and heater core. After I reconnected everything the engine won't turn over. Any suggestions?

Looking for a undamaged, non-cracked, non-creased, non-stained, non-faded dash for an LX450 in the "Oak" color. Basically, I want a dash pad in good condition and it should be local as I imagine shipping one of these could not only be expensive, but it could get damaged. Whatcha got? PM me...

I bought this about 10 yrs ago for a FJ55 resto. I never ended up using it. Its still in its box. Cleaning out the shed and would be nice for someone to use it. 60$ and if you want to cover shipping, I will send it out to you. Lee

I replaced the heater core and evaporator and removed the dash. I cant figure out what this connector is or where it goes. Does anybody have ideas?

I saw this in @TeCKis300's Switchpro thread in a post by @VooDoo2. Has anyone added this? I've looked at the panel and it appears to be easy to remove (haven't actually do it though) and there seems to be plenty of space to add a panel there. Looks like a good way to eliminate nu add-a-fuse...

Refreshing the interior of my 1994 80 Series and I can't stand the old factory cracked gray dash any longer. I put a Carhart cover on it a while back, but I know what lingers underneath and it is nauseating. I am located in central Arkansas but I will be driving west to Wyoming the first week...

I'm not finding the wiring diagram or pin outs for the CDL switch on the dash in my EWD. If you know which page it resides, lmk please. I'm trying to figure out why the CDL relay controller (left side of kick panel) isn't getting power from the CDL switch. I do have the pin 7 mod and the...

Got weird dash light behavior. Going to check the 3 common dask ground locations tomorrow. Show in link below. Where are the FJ62 ground points? - https://forum.ih8mud.com/threads/where-are-the-fj62-ground-points.1018631/ That being the Driver & Pass A pillar bolts, and the common bond block...

Hey everyone. Appreciate all the help on here. As I'm on here today getting ready to assemble almost a complete new coolant system, I'm reminded of a noise that came only for a few seconds then gone for the rest of the day. It sounds like somebody dropped a couple pebbles down a plastic pipe...

$75 plus shipping or local pickup. I’ll be at the Kessler Krawl 9/16-9/18 and could easily bring this along for anyone else who will be there. Has cracks across the top and one corner is entirely gone, but I’m sure someone could repair or even use as-is in a pinch. It still has the light in it...

Sometimes while driving I get all this lights at the same time. Thay stay like that for a few moments and go... and come back without aparent reason. Sometimes they blink... Does anyone know what is the problem? I wouldn''t like to get on fire. It is 1991 HDJ80 EU spec

Sometimes while driving I get all this lights at the same time. Thay stay like that for a few moments and go... and come back without aparent reason. Sometimes they blink... Does anyone know what is the problem? I wouldn''t like to get on fire. It is 1991 HDJ80 EU spec

I love the Mark Levinson stereo but for the chinsey Toyota/Lexus dash and door rattles when I am driving solo and blasting my jams. This piece on the passenger side door rattles so badly that I thought for a longtime on the speakers were blown on that side. After more careful inspection the...

Howdy all. Finally getting this project off the back burner. Ram mount is already figured out, SwitchPro prototype is printing now, what other things would you like to mount in this location? It's a 2-piece assembly that sandwiches the OEM dash after removing the clock, so it's fairly stout...

I have good condition warning light cluster from an FJ40 with a bracket that was recently powder coated. $50 plus shipping

Hi there. I just bought an OEM dash pad for my FJ62 (I found the best price on CityRacer, fyi). I have been looking for instructions on how to take the old one off and install the new one but can't seem to find anywhere. The old one almost feels glued on. I did take out the two screws at...

I have these extra vents that go to the right and left of the instrument cluster. I'd rather not toss them, so they are free for pickup or you pay for shipping. They appear to be 100% functional.