Some very small fisher cracks between valve seats. Pretty common, machine shop said I should run it, but I had a new one on the shelf already. Already been hot tanked and checked for flat. This one is $500 + shipping
location: Western Montana
I posted earlier about my dyno results and ultimately finding low compression on cylinder #1 (30) & #4 (60). I have not been able to do a leak down test but took some not so happy pics with a borescope tool. It seems there is a nick on the cylinder wall....any experts want to weigh in if it...
Hi all, I pulled the manifolds last week to make room for my header coming in the mail and used some strips of gorilla tape to block it off. I'm wondering though, can condensation still seep into these cylinder walls? and, if so, will spraying in some fogging oil before the headers go on, or at...
Used brake master cylinder, 47050-60042 for 2001/2002 LC
Booster pump motor went kaput, got lights and buzzers.
Good candidate for a rebuilt, but I didn't have the time to send it to Andy Le.
Hate to ditch it, $50 plus shipping
Located in Baton Rouge, LA
I have revised this to discuss all clusters series to help with Tach identification. Later versions have ABS and/or Diff lock lights and other idiot lights on dash but main elements all work. The instrument clusters (aka combination meters) are solid state boards that are difficult to add or...
I've got a brand new TrailGear Master Cylinder 1.0" bore.
No issues, just can't use on new hydroboost setup.
For sale: $200.00
Venmo/Paypal
Thanks! Jesse
$15,000
The time has come to sell my 1969 FJ40. Its been a part of the family for over 20 years and it will be sad to see it go. It has a straight 6 with column shift 3 on the tree. Starts, drives, and stops, but all 3 could use a little fine tuning. All good glass on the top and doors. Very low...
We are having to replace the brake master cylinder and curious as to how to remove the reservoirs. I am not there and my dad is concerned that he will break them by doing it wrong.
Hi Non Mechanic here. On my 2005 Landcruiser, the driver side front wheel well area is getting wet with fluid. It appears to be coming from under the brake fluid reservoir/ pump area. I did the brake pump test and the pump engaged with a faint alarm clock buzz for 3 ten second or so...
Trying to bleed the drum brakes, and got leaky drivers wheel cylinder.
Thinking about replacing all 8. Any recommendations on brand and where to buy.
Also, are the wheel cylinders all the same?
The compression values for cylinders 1-5 were between 100 and 125. But Cylinder 6 was 40. So I took the head off and had it reconditioned by a shop and put it back on - hoping it just needed a valve and seal job/new gasket. Put it all back together and compression values for 1-5 are somewhat...
Does anyone know a place (other than muds classifieds obviously) to find exact replacement banjo bolts for the older style wheel cylinders? PO much have lost/broke one of them, and for whatever reason figured that a solid stainless steel bolt would suffice… obviously it does not. The part is...
I'm rebuilding the front wheel cylinders and everything is good except the rubber boots that fit on the adjuster pistons. The rebuild kits I got have the rubber cup and boot for the piston side, but didn't include the boot for the adjuster side. I've searched online and haven't had luck...
If you can position it such that the whole surface of is illuminated with no parts in shadow, then wouldn't that mean you have a reasonably flat surface?
Recently as in, in the last year, the top end on my 3vze was taken to a machine shop and surfaced by the PO's. Not to say they did a s***ty job but I have had to redo every single other fix theyve done since buying this 4runner in april/may. It was pretty clear when buying it but mostly a...
Looking for a hose for a '73 FJ40 Slave Cylinder.
Cruiser Corp sells one for $80 - Clutch Hose / Flexible Line - OEM - FJ40, FJ45, FJ55 1971-1976 - https://cruisercorps.com/products/clutch-hose-flexible-line-oem
I don't know if it is just a scarce item but.... dang! $80 for a hose is steep...
1965 FJ45 LPB is the model. Doing the first drum brake front right. Wheel cylinders rebuilt, new shoes, and springs. They were apart when I received it so going by manual. Seems both springs go behind shoes if I read correctly. The left wheel cylinder spring is very close to adjuster...
Was curious what 175k miles with oil changes every 5k would look like inside the cylinder.
I was kind of surprised and nervous when I saw some of the vertical marks, but they do not appear to interrupt the crosshatching.
I only looked in cylinder 1 and 2 on the driver side and these pics...