1hd-fte

  1. dudwire

    Noisy Input Shaft HDJ79

    Hello everyone, My current gearbox is starting to make a bit of noise from the input shaft at idle and the front seal on the transfer is weeping, otherwise shifts great in all gears, no other noises when driving and last time I dropped the oil there was zero metal. I can't really feel any...
  2. gregdawg89

    New member! 1998 JDM Land Cruiser 100 VX 4.2 L 1HD-FTE turbo diesel

    Hi all, greetings from the Pacific Northwest. I'm excited to join the 100 Series family. Any other JDM 100 series folks out there? Right hand drive rocks! ;-) My LC is pretty much stock, 88k miles, and is in stunning condition. (I can't take credit; the former owner in ***uoka, Japan took good...
  3. Mintyota

    1HD-FTE (Land Cruiser 4.2TD) Limp Mode

    I have a problem with my 1HD-FTE that's been going on for a while. Car enters limp mode randomly when sitting at it idle (normally at trafic lights. Doesn't happen always, can happen in a couple of days or in a couple of minutes). Car has OBD 1 and i have read about connecting the pins together...
  4. Vitek

    For Sale  1HD-FTE ecu and ect

    Up for sale and 1hd-fte engine control unit for auto transmission and transmission control unit :) Was 350, Now 300$ !! Shipping from the Eu is included in the price.
  5. RotisserieChicken

    JDM 100 series are incoming - 1HD-FTE?

    As we all know finding a solid 100 series in the US is getting tricky and expensive... and also expensive to fuel. We are just starting to get the first batch of early 100's into the US from japan etc. Now the question, beyond the RHD annoyances which are very real, would a diesel 1HD-FTE...
  6. dudwire

    1HD-FTE Ticking Noise

    Hello everyone, I have a 2003 79 Series with the 1HD-FTE and it seems to have developed a ticking noise. It's always had it a tiny bit but always thought it was throw out bearing related as the throw out bearing always made a high pitched noise. Until recently I had been using Penrite HPR...
  7. Troopiepete

    Troopy Automatic conversion - 1HD-FTE - A750

    Hi Due to a recent Charcot Left foot injury I am no longer able to drive my Manual Troopy and while selling it would be way cheaper I have way too much invested in the old girl to give it up and seriously there is no other vehicle and motor that will suit my needs. So I am just starting down...
  8. djJelt

    Hello ih8mud#80series – meet my Landies!

    Hi all! Just checking in by way of an intro. Judging from some of the posts here some of you guys like Landies almost as much as I do 😉! I am currently gearing up for an HDJ78 or -79, but right now these are my rigs: (1) '91 HZJ80 (GXL trim) with turbocharged & intercooled 1HZ engine; manual...
  9. T

    Wanted  Norther California - 100 series: 1HD-FTE crate motor needed

    Hey all, am in need of a new 1HD-FTE engine. Or maybe you happen to know how I can contact a dealer over seas and have them ship me a crate motor that’s new? Is it possible to have a forwarder in another country buy it and send it on my behalf? Any input on how to go about this is very...
  10. CIR

    ARCHIVE  Lesson Number One

    Lesson Number 1: No shady business. Recently, I was hunting down a Toyota Land Cruiser HDJ100 for a client. After seeing several examples a pristine example popped up. Garage kept in near perfect condition with only 181,000KMS ! What's not to like? So I traveled to a distant island to meet...
  11. MichaelKnightNZ

    1HD-FT & FTE Camshaft question

    Hey guys! I have loved reading posts on this forum for years and it has answered so many of my questions! but this time I cannot find any info on this one. The short version of my question is: Would I be correct in assuming that the camshaft in the last images (with the recesses/notches in the...
  12. HZJI05

    Cam pulley removing with a rattle gun 1hz

    Hello, Just bought my 105 series 1hz turbo-ed and going to change water pump. as you know to change cam seal in backing plate cam pulley has to be come off. I was thinking to remove engine cover, intake is a pain and instead doing it I have seen people using rattle gun by blocking cam pulley...
  13. Pat80

    1HD-FTE Powered HDJ80

    Its a '93 model. 5 Speed and a factory part time case. Its apparently a GX model which i know nothing about except it has a working sunroof, the stupid climate control AC and a fancy factory sound system Ripped out the junk 1HD-T and put the FTE in, 1 million times better. Also fitted a 1300nm...
  14. bashafridi

    M/t 4 step ecu for 1hd-Fte 2005

    Hi guys I have 2003 landcruiser amazon with a750f auto transmission I have replaced the transmission with h151f manual transmission I need four step ecu for this setup Any help plz
  15. IndroCruise

    What scanner for 2006 Landcruiser Sahara turbodiesel with AHC??

    I would like to check front and rear AHC pressures with a scanner and without the complications of attaching pressure gauges anywhere. First, I need to discover whether my Australia-delivered June 2006 Landcruiser 100 Sahara (similar to VX) with 1HD-FTE six cylinder 4.2 litre turbodiesel and...
  16. L

    Engine heatup on gaining height

    Hi everyone. Acquired a LC100 2003 amazon spec 1HDFTE with the 4 speed auto tranny( my hunch is its a 442f) Used the vehicle for a vacation last month ran into some overheating issues Before leaving all fluids incuding radiator fluid,transmission fluid.diff fluids etc were replaced.A new fan...
  17. teckays

    Bought a '02 LC one month ago - help wanted to investigate some symptoms

    Hello everyone and glad to be here on this forum. Roughly one month ago I bought a '02 LC100 with the 1HD-FTE engine and there are some problems I would like to get help investigating. Obviously I will visit a specialist but first I would like to know your opinion on that. So here they are: 1...
  18. WildSouth

    THREAD CLOSED _ MODS PLEASE DELETE

    Welcome to my Land Cruiser 100 Series VX Limited build thread. Recently I made the decision to sell my old faithful - my 1997 Toyota Surf KZN185. It was a truck that did pretty much everything I ever needed. It got me to most fishing and hunting spots, and was very reliable over the time I had...
  19. N

    100 Series clunk and vibration thread

    Hi Guys, I would greatly appreciate some advice on two topics. My 100 series cruiser randomly clunks when moving the gear sellector from Park to drive and also moving from drive to reverse when stationary of course. On the start of one trip this could happen and on the next slightly or even...
  20. N

    Anyone fitted a yanmar mech fuel pump to 1HD-FTE

    Hi Everyone, So after ASTR killed my dreams of fitting an Isuzu 4HE1-T into my FJ45 (thanks to ASTR for working it out, so I didn't have to), I've been looking for a diesel to drop into it. I was really hoping to use an old mechanical 4 cylinder diesel like the 14B-T or 15B-FT but it seems that...
Back
Top Bottom