1fz fe

Hi guys, so I think I have finally gotten to the bottom of my no start up idle issue. I’ve gotten a code 12 after learning how to read the trouble codes. This code I believe means the engine ecm isn’t reading engine rpm. My question is, what can I do to remedy this? Where do I begin to look for...

Hi guys. I’ve continued to have trouble with my idle on start up from cold. It’s a 94 1fz fe. I’ll give a little background which may help a bit. It was running fine until one day my vaf meter door blew open and jammed, ever since then I’ve had idle issues. on first start up the idle the engine...

In the beginning process of parting out a 40th anniversary edition, NO F/R Lockers. Front seats already gone. Dash gone. Many under hood components gone, but will sell the engine as a LONG BLOCK. About 375,000 miles on it, machined the head about 7,000 miles ago and the cylinders / pistons...

Have various parts from fj80 for sale including many interior parts (tan/dark brown) door panels, window motors, wall panels, floor heater, etc. Also selling tons of mechanical parts including 1FZ engine, transmission, transfer case, wheels, frame, and so on. If you don't see it listed, ask me...

— Thanks to @satchel , this has finally been fixed! Hey Mudders, Revisiting this issue a year later. I'm having an intermittent high-speed fuel pump circuit break that I need advice with. I had posted about this a while ago in another thread before I realized the issue was related to an...

Trades or 8k cash. Vehicle sits more than it’s driven. We don’t live near enough places to enjoy this vehicle. 182k miles. Triple locked. All the normal landcruiser maintenance stuff has been done and it just got new brakes and a brand new dobinsons flexi 3” lift. $1500 lift. No cheap stuff all...

Less than 182,000 miles. Raptor liner paint job. Several maintenence things done including a brand new pen power steering pump. New spark plugs and wires new distributor and rotor new pcv valve new oil pump seal new belts new air filter and oil done less than 1000 miles ago. Tires and battery...

removed from a 1996 Lexus LX450 with 108,000 miles. Will fit Land Cruiser 80’s too. 1FZ engine. Part # 22270-66011. $50 shipped.

G'day folks, i have a bit of a dilema and i did try using the search function and google images but i cant find what im after. So i drive a 96 fzj80 a442f auto and i moved the cable for the auto throttle kick down and the cable came unhooked. Now i cant figure out for the life of me how to hook...

So when my oil light comes on, I am just about exactly 1 Qt. low. Oil light has not been on in a long time. Dipstick looks good (although sometimes it reads waaay over F). Just completed an oil change, and decided to measure the amount that came out of the pan. According to this pic, I only...

hi guys, have been searching this topic for a couple of days now and I'm either using the wrong terminology or there is no write up on it but I need some help. Heater hoses have started to leak and deteriorate and its time to change them. Living in the middle east don't really need the heater...

With high performance N/A engine.

if anyone has the engine wiring for 96 tlc that is still in decent shape (heat shield not warping/sloughing off, no exposed wires or cuts, etc), please let me know. i don't know how easily this harness can be repaired/spliced/patched, but i only really need the bit that runs under the intake...

Newbie to i8mud but long-time cruiser owner. Not sure where to post Sioux Falls area Time to thin the heard., I have a 97 cruiser, body totaled, mechanically all there, no lockers. runs drives and stops. 200,000 miles. no rust, t-boned on pass side, 95 cruiser white, rusty, lockers, zero...

Looking to get rid of a bunch of 1FZ-FE parts I've been sitting on. Tore down off 1996 FZJ80 parts engine with blown headgasket. I can provide more recent pictures upon request. ALL $5 - Plus shipping or local pickup Everything FREE - Local pickup preferred in New Orleans, LA Lower Oil Pan -...

anyone have a valve cover, a set of cam gears and cam sprocket they don't need, or a completely trashed engine with these parts intact? Want them for some expirementing so I will likely be trashing them. Thanks