Got a free second to update this thread! We made it back home on October 22nd. What an amazing trip!! I've been so busy since the moment we got home that I haven't even had time to check out my pictures until now.
Somewhere along the coast of...
It’s been a long and winding road returning my never-running 65 Fj45 to a drivable rig. I thought I would do a recap, especially after abandoning the rebuild post years ago, with a new post of lessons learned and other ramblings.
Recap
I see...
Mmhm!
New Prius water pump replacement steps:
1. Remove engine and transaxle assembly.
2. Remove water pump.
3. Install water pump.
3. Install engine and transaxle assembly.
-OR- support engine on jack, unbolt motor mounts, 5’ pry bar that...
Your truck did not have a heater in it. Someone added the underdash box and then stopped.
You shouldn’t have to grind your axle housing, that’s only a thing on the pre-75 drum axles. The post-75 drum axle use the same large birfield as disc...
They lock the kick vent closed. I've only seen them on UAE trucks, but they could be an option elsewhere. Marv Spector had them on his 464 beige 84 HJ47: that's the first time I'd ever seen that.
Loosen the 10mm bolt and twist them up, then...
After hurricane Isaias blew through late Friday night (or I suppose tropical storm Isaias by the time it got to us) I woke up to a beautiful, low humidity day on Sunday. Checked the weather forecast that afternoon and noticed there was little to...
After owning and daily driving many newer Land Cruisers over the last decade (80, 100, 120, 200, 250), I finally got permission from the wife to add a 40 to the garage. I have a beautiful 20-minute South Denver commute and this 40 will be my...
@Froggie you can use the following site to look up specific parts for your Saudi truck. TOYOTA LAND CRUISER 40 | Japan Parts EU - https://japan-parts.eu/toyota/gr/1984/land-cruiser-40/fj45_6#
You will be general countries option for market and...
Two cans of PlastiDip and some masking tape later = some fun graphics on my skid plate (Victory 4x4 if you're wondering).
I did this couple years ago with vinyl tape to test it. I loved the look. Tape wore off, so time to redo it.
Rawr!
I also, spent some time on ChatGPT using multiple original window stickers (posted on mud) as a reference. To generate a replica of what I believe mine would have looked like. I even found the name of the nearest Toyota dealer in the area of the...
While I waited for more parts to arrive, I knocked out a set of custom center caps for @cosport. They turned out sweet and definitely gave me an idea for what I want to change mine up to in the future.
These are the custom caps I am...
Not sure what happened with the original one but it looked like something melted the plastic inside one of the cupholders. $243.00 and 1.1/2 months later got it delivered. I know, my OCD won't let my wallet rest.
Chipping away at the stone.
CB at his craft. Took some finessing to mount the doors. A little hand planing and sanding was in order. Cut the hinge seats by hand so it took a little time to get them to cooperate. The large pantry door was the...
Just drove home thorough the mostly pounding rain. So far so good. A few minor issues I'll work through and then the fun stuff. This springs are fantastic!
I filled her up down the road from Matt's Cruiser Spa. Averaged 73 mph (accordingvto...
Well, as things tend to happen...
I went out to flip my front bezel which has been upside down since I got this rig. That got me looking up close at the front end which has always looked kind of wonky (in my defense I haven't had much time to...