WOW
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
They may have gone with a bung extender to trick the sensor. that's how we did it with Honda track cars.
Any idea what size lift is on your 80? Looks great man, I wanted a green LX but I got the 2nd best color
No idea, I see OME shocks and stabilizer under the truck so I am guessing it's some sort of OME springs, I want to get under there to see if I can find some of the tags to give me an idea. I quickly measured center of hub to top of fender on the front and rear and I have between 23-24 inches on the front and 24.5 to 25.5 inches on the rear. I have a feeling the springs are swapped, because it leans to the driver side but I also want to get rid of the stink bug look
It's definitely not stock height. What size are those tires? I was thinking taller than 285s, but maybe not. If they are 285s, then I'd guess it's the 2.5 inch lift.
The stink bug is because it's so empty. Noted in the other thread you're anticipating sliders. I wouldn't worry about the stinkbug until you get those one and whatever else might add weight in the back, then consider what's needed to adjust. If you end up level from that, you'll be low with a load added to the rear.
I agree your lean is most likely the coils are on the wrong side.