Mine is exactly like @NoClue's, sits on top.
What have you done to your 200 Series this week? (28 Viewers)
- Thread starter MScruiser
- Start date
-
- Tags
- 200 series
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
turbo8
Supporting Vendor
Doing a refresh on the drivetrain after 260k
4.88 gears
Harrop lockers
Wheel bearings
Seals
Cv axles
U-joints
Brakes (disks/pads)
Rebuild/revalve rear shocks
TC spindle gussets
So far the front wheel bearings and front drive shaft u-joints don't have any play.
4.88 gears
Harrop lockers
Wheel bearings
Seals
Cv axles
U-joints
Brakes (disks/pads)
Rebuild/revalve rear shocks
TC spindle gussets
So far the front wheel bearings and front drive shaft u-joints don't have any play.
What drawers are these? looks awesome. Do they use 3rd row seat brackets for mounting?
so did you end up with sensor lights on the dash staying on now that your seats are removed? Looking at purchasing a 200, don't want 3rd row so i've been trying to find a heritage without. Wish you could easily replace wheel well covers to cover up the holes.
TrekboxX. They us the same bolt holes.
No warning lights. Simply unbolt and store in attic for 20 years.
awesome, thanks. Looks like a really nice drawer system.
Went to help a friend pick up his new 60, surprise hail decided to visit. Only found 2 dents so far, sure I'll find more tomorrow.
Got tired waiting on Slee sliders for the past 6 months and finally pulled the trigger on Metaltech 4x4 sliders for my LX - they should be here on May 11th! (In time to be mounted and operational for LCDC this July)
Had the same style sliders (from Metaltech 4x4 just a difrent way to mount) on my 100 series and they were stout !!
As a result of going Metaltech 4x4 route I will not need the plastic rocker panel covers that I had purchased and had painted in my truck color 1G8 (Twilight Gray Metallic) due to the fact that the front part of the slider for LX is shaped differently than the one for LC and would require to cut the LC rocker panel anyway.
The rocker panel covers for the LC or Lx with Slee Sliders will soon be for sale in the classified section.
Can't wait to get my sliders on !!
Had the same style sliders (from Metaltech 4x4 just a difrent way to mount) on my 100 series and they were stout !!
As a result of going Metaltech 4x4 route I will not need the plastic rocker panel covers that I had purchased and had painted in my truck color 1G8 (Twilight Gray Metallic) due to the fact that the front part of the slider for LX is shaped differently than the one for LC and would require to cut the LC rocker panel anyway.
The rocker panel covers for the LC or Lx with Slee Sliders will soon be for sale in the classified section.
Can't wait to get my sliders on !!
Last edited:
Finally got my full aluminum skids (not pictured) and sliders installed. Looking forward to beating them up! The kicker has a nice bonus being a large step for my two small kids. This is my second set of bud skids and armor, and am very satisfied with the product.
TheGrrrrr
GOLD Star
A man after my own heart. Silver LC, RWs, BB sliders, BB skids... and flip flops. Are you me, in a parallel universe?
Can you also make a woman fall in love with you with a simple touch?
Do you also drink a mug of nails every morning?
Do you speak Braille?
Can you do a wheelie on a unicycle?
If so, then yes, we are the same.
TheGrrrrr
GOLD Star
3 out 4 ain't bad. ******* unicycles.
JLH
SILVER Star
Ironman Stage 2
Morning:
Evening:
Morning:
Evening:
We have the same color truck and I'm interested. Shoot me a PM when you're ready to sell the Slees and rocker panel cover
Tommy Dwyer
SILVER Star
Removed the third row seats…finally, after ten years. They actually got used fairly often.
Added the Kaon shelf to the rear. Currently holding NOCO jump pack, first aid kit, Indeflate four hose, hilift base (for stabilizing the stock bottle jack), and a Rumpl blanket. This shelf is my favorite mod of late…replacing a Blue Ridge attic.
Added the Kaon shelf to the rear. Currently holding NOCO jump pack, first aid kit, Indeflate four hose, hilift base (for stabilizing the stock bottle jack), and a Rumpl blanket. This shelf is my favorite mod of late…replacing a Blue Ridge attic.
Anybody have trim pieces to cover the exposed slots when the rear seats are removed?
Most guys deleting the 3rd row are covering it with a drawer system. Others are using things like black duct tape. I’m not aware of a produced one you can buy.
Tommy Dwyer
SILVER Star
I’m not aware of an after market solution either. I don’t plan to add drawers, guess I’ll just live with it until something comes up
