Trail Tailor Offerings

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Custom 30 gallon replacement tank for @Idaho Savage . I'll finish welding this up in the morning and get a 24 hours water test started.

Top pull, lower drain , dual baffled and vented.

Another tank option for the LS3 swaps with rear coil conversions.

J

IMG_20200611_131930500.webp
IMG_20200611_131936821.webp
IMG_20200611_132021684.webp
IMG_20200611_131959566.webp
IMG_20200611_132028368.webp
 
staggrlee said:
Is this likely to be available only to the build side of the house or are you considering shipping? Especially interested if paired with an accurate fuel gauge sensor that plays nice with SpeedHut gauges.
Click to expand...

We can discuss on the PM side... I have a proper floatless sender that is in the SpeedHut ( @FJ60Cam ) gauge range that I have used one a few tanks now with excellent results.

J
 
Me three !
Just took delivery of some Trail Tailor goodies - backing plates for speedhut gauges, chassis tow points and replacement apron items. Top stuff. Thanks Jason.
 
Roof rack test. My photographer was up there with me to watch rafters go through Rocky Rapid on the Colorado River. I see no problems with a 200+ Lb guy climbing up there to rig cargo. Rack is stronger than the drip rails supporting it. Also.. great view from up there.

Resized_20200606_120219.webp
 
MoaByte said:
Roof rack test. My photographer was up there with me to watch rafters go through Rocky Rapid on the Colorado River. I see no problems with a 200+ Lb guy climbing up there to rig cargo. Rack is stronger than the drip rails supporting it. Also.. great view from up there.

View attachment 2337046
Click to expand...

That one off rack is probably one of the strongest I ever made. Plus it looks great on a 60! Thanks buddy!

J
 
It really puts the "utility" in these rigs. Ladders, SUP's, firewood, or even a bag of ice on a quick trip to the corner store. One of the best upgrades, thanks Jason.
 
franklin40 said:
put me on your list for a 62 bezel right now!! i’m all in for one of those!!

so siked that you are looking at making one for us 4 eyes
Click to expand...


I guess you guys need some (well maybe a LOT) love too

1591927753989.png
 
Tank is good to continue on... Looks like this will become a common build item for us. Have two more to build and then talking to a customer now on a custom tank to get as much capacity while keeping the spare tire.

J
IMG_20200612_110702223.jpg
IMG_20200612_110709842.jpg
 
Last edited:
YES! That tank looks awesome. Looking forward to see that high capacity w/spare tire option
 
Skniper said:
Ohhhh, that is a badass option if able to retain the spare under.
Click to expand...

By rough measures I'm seeing we can make a 26-27 gallon tank and keep the spare where it is right now. Hoping to get closer to 30.

With every 1" of drop of the spare (will be an secondary option) gain 4-5 gallons of capacity.

J
 
Well now
TRAIL TAILOR said:
Tank is good to continue on... Looks like this will become a common build item for us. Have two more to build and then talking to a customer now on a custom tank to get as much capacity while keeping the spare tire.

J
Click to expand...
Well now I need a 60 coil conversion, a bezel and a bigger tank that keeps the spare!
 
what do you line your fuel tanks with? any type of coating?
 
You must log in or register to reply here.

Share this page

Back
Top Bottom