Ok LED lightbar tech.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 2, 2004
Threads
227
Messages
11,510
Location
Washington
I think I need a 40-50" lightbar for my roof rack I have the (2) 10" rigid's in the grill but I think the rack needs some love. There are so many options out there now, what are you using, and how do you like it? The Rigid seem to have been left behind as far as price is concerned, is there anything that suggests they are worth 2-3x more than some of the others?
 
I too wanna put a led light bar on my rack... Would like to see what suggestions there are.. I dont plan on spending more then 400 bucks on this mod.
 
On the local Craigslist, you can find tons of guys selling brand new Cree LED light bars for fractions of the Rigid price. Rigid uses Cree LED's on their lights, but I assume the light housings and warranty are what justify the huge price gap? You can get a 50" curved Craigslist Cree bar for $300 or less, while the Rigid 50" would run you well over $1,500...

Maybe just buy 5 of them and replace them as they go?:hmm:
 
My biggest problem with these is the light they would cast light on the hood, are there any reflectors that could "shade" the hood?
 
Flat black the hood.
 
I suggest you take these light bars apart when you get them and seal them with RTV and/or silicone. Just like the HF winches, you should give them a little help to keep them living a longer life :)
 
52" for $132 shipped. http://www.amazon.com/Eyourlife-30000LM-Light-100pcs-intensity/dp/B00F4MQJ5O/?tag=ihco-20

Take the money you saved and buy some upgrades that really matter. Hurry before the China haters get their made-in-China panties in a knot.

Friend recommended the Eyourlife lights on Amazon as well. Another friend bought one and figured at the price why not so I did too. Seem to be good lighting, and nothing cheap strikes me as the housing goes. We will see longevity, but bang for buck.....
 
I would look at the new 10w LED bulbs. I have a 60w 10" spot light bar that is better than my 40".


Flat black the hood.

I have a 40" bar on my roof that I got on eBay for $130. Even with the hood black out, the light bar up there is annoying and messes with my eyes.
 
That bad on the roof hmm, this was kind of to kill 2 birds with one stone as I think the LED will quiet down the round tube but also for look and function but if it sucks I will think of something else.
 
I think more importantly than a blacked out hood is proper placement of the light bar. It should be far back enough to not cast light directly on the hood.

Hoping to hear more feedback on brands as id like to replace my light force lights on my arb...
 
I've got ebay Cree led lights on my front bumper, on my utv plow rig and my tractor roll bar. These things are amazingly well made for the money. I'm about to get the same light bar for my roof rack(I need the wind noise break as bad as I need the light). When I was putting my brand new light on my tractor roll bar, I dropped it on the cement floor (almost 8 feet), didn't hurt it abit.
 
This is with low beams on and little fog lights in bumper.
image.webp


This is with the Lightforce and high beams.
image.webp

And this is with the hood all lit up by the light bar with low beams on.
image.webp



If I were to get a new lightbar for the roof, I would look only for one with the spot configuration. My current light bar has the floods on the outside, and it sends light out at like 180 degrees. I would also look for a bar with the 10w leds. They put out so much more light than the little ones.
 
This is with low beams on and little fog lights in bumper. View attachment 1041602

This is with the Lightforce and high beams.
View attachment 1041603
And this is with the hood all lit up by the light bar with low beams on.
View attachment 1041605


If I were to get a new lightbar for the roof, I would look only for one with the spot configuration. My current light bar has the floods on the outside, and it sends light out at like 180 degrees. I would also look for a bar with the 10w leds. They put out so much more light than the little ones.

Where did you bring your wire in for roof mount light bar? I just mounted my rack and bar, but have not wired the bar yet.

ImageUploadedByIH8MUD Forum1425733064.993661.webp
 
Just bought a 40" straight, flood/spot combo on ebay this morning. It has the 5 watt cree led's instead of the 3 watt. The 10 watts are nice but I could only find them in single row. They look cool but I need a taller bar to stop the wind coming under my rack to stop wind noise. I'm doing the light bar for noise as much as anything, hope it works
 
We have LED's mounted to the front of our fire engines. They illuminate every bit of dust, dirt, smoke, etc. in the air right in front of your face. I wouldn't mount an LED light bar on a roof rack. Put the light bar on the bumper & HID's on the roof rack. If you insist on a light bar on the rack then make sure it's spot beam only.
 
I have a 52" curved CREE bar (300 lumens per LED) right above my windshield it has spots in the center and floods on the side. Its like having a collapsed sun up there. Yes it does light up the hood a bit but its not distracting when its lighting up everything in front of me so well. The only time it sucks is when its foggy, snowing or the lens is caked with ice (in that case it lights up the hood and the inside of the car too).

0ed9c5c9-90b2-4517-beba-e5354dddefe6_zps87eef104.jpg

photo17_zps0b48fc96.jpg

photo%203%207_zps3csxxnyk.jpg


Headlights:
photo18_zps14738547.jpg

with bar on:
photo28_zps24f52e65.jpg
 
Last edited:
Back
Top Bottom