Last edited:
Official ONSC member buying/selling thread
- Thread starter southerncruiser62
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Though I appreciate the contact info, I'm with @sleepycruiser about protecting yourself.
I DM'd you.
Strongly advise to delete the contact info post/s.
Last edited:
You will have to edit it out of your quote as well.
Unless I missed another post, both are edited (X'd out).You will have to edit it out of your quote as well.
Thanks @sleepycruiser
Selling my dissent rear bumper for a 100 series. Located in Raleigh
For sale 100-series/LX470 Dissent V2 Rear Bumper (Modular, NO CUT)
Owned for 7 years shortly before HIH9 in 2019. Has been a stout and very reliable bumper. Towed multiple times without issue.
Will include both the tire swing out and jerry can swing out. I will be keeping the license plate light and Tow harness.
A new similar built spec on the website would...
- Sargy (+0 /0 /-0)
- Views: 286
- Reactions: 2
- Comments: 4
- Category: Exterior / Armor
$2,000.00
3 watching
I’ve got a good working upright freezer I need to offload. Previous home owner left it.
GE brand, located in Matthews, NC.
$120
GE brand, located in Matthews, NC.
$120
Good afternoon, all. I have a friend in VT (Poor Wally) who is looking for nice body panels. This is for a customer build, so not looking for a deal, just good parts.
Needs front doors, rear half doors and a liftgate for a 72-74. He had asked me to ask around.
Needs front doors, rear half doors and a liftgate for a 72-74. He had asked me to ask around.
Hoping to clear some garage space and funds for my 40 series project. In Asheville area and would trade.
~1996 1UZ engine with wire harness/ECU/MAF with matching 2wd trans from a LS400. Also have a donor AW4 that could give up the tailshaft/housing for an adapter-less Atlas bolt up. Bought from a NC4x4 guy that said it was out of a drift car until it did drift car things. I had dreams of a all toyota V8 buggy but a 5VZ fell in my lap and is a shorter putt. $850
285/70/17 BFG KM3s with 40-50% tread. Ran on my FJC since I bought them new in 2022 with 2021 date codes. Pulled due to worn tie rod end feathering that made them loud. All hold air fine, no plus/patches $500
37x12.50x17 Milestar Patagonia MTs with 20ish% tread. Ran these on my 4runner and 80 series for a while. 2018 date codes and I grooved the centers to get some life out of them. Good mock up tires or more depending on your standards
$300
~1996 1UZ engine with wire harness/ECU/MAF with matching 2wd trans from a LS400. Also have a donor AW4 that could give up the tailshaft/housing for an adapter-less Atlas bolt up. Bought from a NC4x4 guy that said it was out of a drift car until it did drift car things. I had dreams of a all toyota V8 buggy but a 5VZ fell in my lap and is a shorter putt. $850
285/70/17 BFG KM3s with 40-50% tread. Ran on my FJC since I bought them new in 2022 with 2021 date codes. Pulled due to worn tie rod end feathering that made them loud. All hold air fine, no plus/patches $500
37x12.50x17 Milestar Patagonia MTs with 20ish% tread. Ran these on my 4runner and 80 series for a while. 2018 date codes and I grooved the centers to get some life out of them. Good mock up tires or more depending on your standards
$300
I have some nice rear doors and a hatch in our clubhouse section bbrc
post 991
Selling Sarah's 2022 VW Tiguan SEL R-Line 4-Motion. We bought it new from Flow VW Durham and have enjoyed it but needing something bigger. It's in excellent shape with 35,xxx miles on it. Factory warranty is expired but has extended bumper to bumper until June 2028 or 90,053 miles. Top trim level for 2022 and has all the goodies and tech on it. Just serviced at VW. Let me know if you or anyone you may know is interested.
If you are interested, PM me and we can chat.
SOLD
If you are interested, PM me and we can chat.
SOLD
Last edited:
SOLD!
Selling a set of five 2015 LX570 wheels and almost new tires for $850. Full description and pictures available on the Mud classifieds section here:
Selling a set of five 2015 LX570 wheels and almost new tires for $850. Full description and pictures available on the Mud classifieds section here:
For sale 200-series/LX570 SOLD! 2015 Lexus LX570 OEM 20” Wheels/Tires – 4 Nearly-New Yokohamas + TPMS
Selling a complete set of five factory/OEM Lexus 20-inch alloy wheels from a 2015 Lexus LX570.
Included:
- 5 OEM Lexus 20" alloy wheels
- 4 Yokohama Geolandar H/T tires — 285/50R20
- The four Yokohamas were recently installed by the Lexus dealer when they were selling the vehicle and have less...
- KirkLX570 (+0 /0 /-0)
- Views: 87
- Category: Wheels and Tires
$850.00
Last edited:
MetalTech stinger and SmittyBuilt X20 10,000 lb winch for sale. Came with a recent project, but I’m going a different direction. Everything appears to be in good condition.
Located in Roxboro, NC
$500
Located in Roxboro, NC
$500
Saw this FJ40 for sale in Winston-Salem. Looks like a really clean rig
I have some Gen 1 sequoia stuff to give away. Please DM me if you're interested.
Available:
New Charcoal canister
New Clock Spring
2 beige leather third row seats (the latch is not working properly, bei tthe leather is in excellent shape.
Driver's side factory headlight.
Tailgate weatherstrip
Tailgate window bottom trim
Please let me know if you;re interested. Thank you.
Available:
New Charcoal canister
New Clock Spring
2 beige leather third row seats (the latch is not working properly, bei tthe leather is in excellent shape.
Driver's side factory headlight.
Tailgate weatherstrip
Tailgate window bottom trim
Please let me know if you;re interested. Thank you.
Set of 100 series 1st and 2nd row floor mats. $50 OBO. Located in Winston Salem NC
- Joined
- Oct 4, 2008
- Threads
- 193
- Messages
- 6,202
WTB: 60 series 2" trailer hitch and harness
Draw Tite, Reese, Curt, etc... something beefy
Draw Tite, Reese, Curt, etc... something beefy
I've sold all my 80 stuff, which would have been ideal, but I do have a 2.035–in square tow hitch that I just wrenched out of a customer's Curt under–frame receiver (that was intended for a 2–hitch), if anyone wants it.
Free to good home.
Free to good home.