Hamom for father of soldier killed in Iraq- Part Un (1 Viewer)

[ClemsonCruiser]

I may be camping in the back of the 60.

I am bringing the 80 and was planning on doing the same but didn't want to be sitting around a campfire by myself

 

[Southeast Overland]

We've had contact with three local reporters. Looks like we will have some decent media coverage.

We also will need to have some work lined up for volunteers who show who are not mechanics. A reporter from the Oconee Leader is going to try and get service clubs from two local high schools to come out to help.

Thanks again to everyone!

 

[Southeast Overland]

Check the second post - Shane (AATLAS1X) sent a ton of parts!

Thanks Shane!

 

[AATLAS1X]

Check the second post - Shane (AATLAS1X) sent a ton of parts!

Thanks Shane!

Welcome!

Copied from post two.


*POR15, RustBullet, or Rustoleum paint for frame

Use Plasticote "bed coat" it will get someone really high but works wevy well on a clean frame. I use Castrol Super Clean and pressure washer.

*new heater hoses 50' of misc shipped

*Fuel filter two shipped

*Complete fuel line (soft) for whole system (5/16") Bunch shipped

*Spray in bedliner ( I recommed Raptor U-POL and its cheap and you can spray it in the driveway.)

Tcase shifter boot Shipped

Steering wheel ( I will call a friend to see if will donate a stocker) that ok?

Centerarm rebuild kit Call this guy for a donation.

2 door limiters Shipped a restored set.

Seal between fiberglass top and metal sides I can get you a aftermarket option if no other is available

 

[Southeast Overland]

Thanks again Shane. Looks like you caught me mid update in post #2.

Steering wheel ( I will call a friend to see if will donate a stocker) that ok? - Sounds good

Seal between fiberglass top and metal sides I can get you a aftermarket option if no other is available - Sounds good

 

[Southeast Overland]

Shane - am I correct that we still need rear long jump seat foam and covers?

 

[AATLAS1X]

Shane - am I correct that we still need rear long jump seat foam and covers?

Yes,

I do not have them or have a pattern for them as of yet. I was going to use these frames, but another set will come along before summer.

 

[landcrusher909]

Let me know about the center arm I have one I was going to bring in good shape just bolt it on

 

[AATLAS1X]

Thanks again Shane. Looks like you caught me mid update in post #2.

Steering wheel ( I will call a friend to see if will donate a stocker) that ok? - Sounds good

Just got conformation, steering wheel will be on it's way. It is also from a BJ42 so I think it's a late model wheel 8/80 and up but missing the center logo


I sent him the link to read, he says that he will donate rear tail lights (not sure if just the lens or units) and sun visors to the build, so you can mark those off.


Shane

 

[AATLAS1X]

1Z419R9X0342080106

UPS ground for the jump seat frames and all the hoses

 

[Southeast Overland]

Let me know about the center arm I have one I was going to bring in good shape just bolt it on

Thanks Rob!

Yes,

I do not have them or have a pattern for them as of yet. I was going to use these frames, but another set will come along before summer.

Wow - thanks again for the donation.

Thanks again Shane. Looks like you caught me mid update in post #2.

Steering wheel ( I will call a friend to see if will donate a stocker) that ok? - Sounds good

Just got conformation, steering wheel will be on it's way. It is also from a BJ42 so I think it's a late model wheel 8/80 and up but missing the center logo


I sent him the link to read, he says that he will donate rear tail lights (not sure if just the lens or units) and sun visors to the build, so you can mark those off.


Shane

Sweet!

 

[apeterson]

Just paypaled he $$ I have gotten so far...

thanks to my parents and Dr Deb Brown of Pequot Lakes animal hospital

Pequot Lakes Animal Hospital

 

[JamesR]

Hello All,
Thanks to everyone who is taking part in this project. I honestly am speechless in regards to the outpouring of support. Jared and I have been working to prepare the FJ. The engine/tranny/transfer case is out. The interior is bare. The inside and underneath has been power washed. I plan on another visual inspection to see what else needs washed once the rain stops.
Let's all pray for good weather MLK weekend.
I look forward to meeting ya'll.

 

[AATLAS1X]

The only thing I have not shipped is heater parts. The FJ takes the early heater and I do not have one. I have the later 74 and UP, but not sure about installation?

Not just to the firewall, but the duct and blower as well.

Thoughts?

 

[AATLAS1X]

I also have a aftermarket top seal coming your way.

 

[landcrusher909]

The only thing I have not shipped is heater parts. The FJ takes the early heater and I do not have one. I have the later 74 and UP, but not sure about installation?

Not just to the firewall, but the duct and blower as well.

Thoughts?

anyway you could post a pic of the heater I have a few misc heater parts

 

[AATLAS1X]

anyway you could post a pic of the heater I have a few misc heater parts

Meaning the whole heater I have in not even close for this model. I have not found out anyplace that the later model will even bolt up.

 

[AATLAS1X]

I have two tubes of Kent Moore seam sealer if needed. (under windshield at cowl and firewall)

 

[poose]

I have a few spare heater core radiators 78-71-74, also a complete heater from a 78, not sure on the ducting I will dig for them tomorow

 

[Carp]

Last day to preorder your t-shirts for this build. There might be a few at the build, but we can't guarantee to have your size. Go to Upstate Cruisers Store and order yours now.