Build Finally Tan 87 touched slightly.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 14, 2011
Threads
73
Messages
599
Location
Richmond, KY
I recently found an untouched rust free 87(thanks to MEL-LOW) and am on a quest to bring it back to glory. I got the truck at the first of December and had some time over the break. The following items have been completed.
-all new clutch parts
-new h55
-rebuilt the t-case with Georg's help(thanks)
-oil pan and side cover gasket
-cleaned, cleaned and cleaned.
-complete new suspension
-new 31x10.5 bfg's
-new belts
-new ps pump
-new led lights on interior
-new sending unit
-fixed charcoal canister
-check compression all around 145-150
-new plugs and wires
IMG_7787.webp
IMG_8017.webp
IMG_7991.webp


pending items
-knuckles
-new radio
-new drivers seat bottom(if anyone has a good cover pm me)
-rigid fog lights
-new front bumber
-weather stripping from Jason Reeves
-spare carb on the way to Jim C.
 
Wow, that IS nice! When's the 3FE going in?
 
Nice to see another loved 60 in the Bluegrass State.
 
Long lost cousin's in the same garage! Really nice 40 and 60 you have there
 
love it! just curious what rpm do you run now on the highway, say going 70 mph? Really thinking about a H55F as it seem like minimum highway speed is 70mph out here in CO.

Cheers,
Mark
 
Looks good. What did you do for the charcoal canister fix? Mileage? What suspension?
i would fill the tank port up with pb blaster let is sit a day and hit it with compressed air. i did this several times, it may be only temporary but it is working now.
 
i will post up alot more pics later but the truck has 262 on the clock. from what i was told it was garage kept most of its life and the interior proves that. it is super clean. i went with the full ome kit on suspension.
 
Back
Top Bottom