Wanted Early FJ series Speed detectors

[clemson55]

Carb Parts and Exhaust Donut

Looking for the window for the 58-69 1 barrel carb, and a rebuild kit, and unsure what the third part is but it screws in next to the fuel mixture adjustment screw. Any help or anyone with these let me know thanks. Also looking for an exhaust pipe donut for where the pipe attaches to the exhaust manifold in case someone has one around.

 

[mike]

parking brake

I have a spare from a 77fj40. Let me know if it will work for you. Thx

 

[mike]

I have a 3b and 1b in Toronto. I have sent you a pm

 

[wantatlc]

I have a spare from a 77fj40. Let me know if it will work for you. Thx

what parts do you have exactly? the switch I need looks like this http://store1.yimg.com/I/coolfj40_1861_14698271 that is all I know for sure.

from there, you would know better what runs from that switch to the light on the dash than I do as I have never seen what attaches to this switch???

let me know, thanks!

 

[Aseif007]

Shoot me an e-mail. aseif007@yahoo.com

 

[FJ60Cam]

4.11s thirds

Complete 4.11 thirds wanted to go in an 85 60, front and rear. Trade for 3.73s?

Thanks,
Cameron

 

[clemson55]

I have a 4.11 out of a 73 fj55, not sure if that works for you or if the splines changed. PM me if you are interested.

 

[mcstrand]

I have a '77 FJ40 with 4.11s, but I don't know if they would be interchangeable with 3.73s out of an FJ60 -- do you? Also, where are you located (don't want to spend a lot on shipping)? I'm in Wisconsin at zip 54601.

 

[wantatlc]

more details on what I need here as this tak sabout how to even hook it up: https://forum.ih8mud.com/showthread.php?p=658310#post658310

but let me know if anyone (1) knows what parts it takes and (2) if you have them to sell.

 

[nuclearlemon]

those will both be course spline. you can get a course spline round flange from kurt at cruiser outfitters and drill to match your driveshaft, or find the appropriate slip yoke to match the pinions and swap onto your shaft.

 

[dacicci]

sorry for time delay send me an email with some info and i will send you a money order for plate

rdnnkd@excite.com

 

[FJ60Cam]

not sure if I'm ready to have that much fun...

I'm in Elvis, TN

 

[hugh jeffner]

stock fj80 rear coils

looking to spend ~$50 on the pair, if you can help out, that would be great.

you can email at jeffa9521@yahoo.com

 

[mike]

2 complete axels with 4:11's

i have two axels from 81bj42 with 4:11's. I'm located in Toronto,Canada. Let me know if your interested in them. Thx

 

[mcstrand]

I'm in Elvis, TN

That's probably going to make the shipping more than I'd like to spend. Thanks for the response, though.

 

[clemson55]

Its too bad that they are different splines like I thought because I'm in SC that wouldn't have been to bad on the shipping. Good Luck.

 

[advantex]

Hi Mike

I can't get private messages for some reason. Could you please e-mail me?

Thanks

 

[camcruiser13]

kool

 

[gnx7]

WTB- FJ62 mirrors (pair), FJ60 spare tire rod

I'm getting my truck painted and wanted to upgrade to the larger FJ62 mirrors for better visibility.

If you have a pair please email me price? How much shipped to San Mateo, CA 94403?

I also need the complete rod/handle that lowers the FJ60 spare tire. It is an extended rod that slips in above the rear bumper below the tailgate and then deep into the rear of the truck to lower the spare tire chain. Mine never came with one when I bought it.

gnx7@hotmail.com

Thank you,

Mark
'84 FJ60 that needs paint badly.....

 

[SizzleChest]

late model FJ40 apron emblems

originals preferred, but will consider the adhesives if the price is right. thanks.