Build DINGO- 60FZJ-UTE LS3 EROD (PROVEN CA SMOG)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Gauge cluster with Trail Tailor brackets and SpeedHut gauges from @FJ60Cam

J

IMG_20191106_083946480.webp


IMG_20191106_083952398.webp


IMG_20191106_082642536.webp


IMG_20191106_082615371.webp


IMG_20191106_084600549.webp
 
B4BF1ADE-E954-4FC4-ADBE-35693B858142.jpeg

I wanted to go with white but didn’t know what it would look like at night. I thought white may be too distracting at night, interested to see how they turn out.
How nice to completely start all over with wiring. I’ve got so many pulled harnesses now behind the dash.
 
Hojack said:
View attachment 2135324
I wanted to go with white but didn’t know what it would look like at night. I thought white may be too distracting at night, interested to see how they turn out.
How nice to completely start all over with wiring. I’ve got so many pulled harnesses now behind the dash.
Click to expand...


The harness that was in the old dash was murdered... The firewall cut I got from @3_puppies had 4 tie ins 2 for radio and two for the brake controller. The old harness were good, so they were pulled, transferred and re-wrapped. Easier repair and no BS wiring. Now I can add a few wires/harnesses I need for the remainder of the build and have some piece of mind that no arcing is going on in the hidden shadows.
 
tmxmotorsports said:
Well damn just like that...lol
Click to expand...

Str8Razor said:
Uhhh ok, congrats I guess..
Click to expand...


It'll be going to someone that appreciates it and will use it for its intended design. Probably get more attention with someone else and draw more attention to TT at the same time.

We have 8 cruisers now and 5 sit idle constantly. My 100 and Andrea's 80 are used the most on a daily basis. We have a 9th vehicle that is the "travel" car that will soon be replaced by either a newer 100 or a 200.

9 cars with full coverage insurance in California..... (choice for coverage... just our preference) but ouch.

This doesn't include the 55 street/strip build or the white 60 I just bought for R&D either.

If for some reason the deal doesn't work, I'll finish the build and either sell or put it in the warehouse with the others and use it once or twice a year for a couple of days.
 
J, congrats on the sale! The build is going great as usual :)

img_20191130_075516044-jpg.2146062


Quick question...any chance that you will come out with accessory plates for the 60 radio slot? I'm in desperate need of a three gauge holder in that spot. The 3D printed one that I did for prototyping deformed like heck in the Texas sun. Also, how do you plan on securing that plate to the dash?

20190703_093055.webp
 
You must log in or register to reply here.

Share this page

Back
Top Bottom