SOLD Denver, CO: 1997 Land Cruiser 40th Anniversary (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Year
1997
Vehicle Model
  1. 80 Series
Location
Denver, Colorado United States
Mileage
228500
Located in Denver, CO
Asking: $25k
Fresh Build with less than 3,500 miles on all mods listed below. This build was a COVID project for me and has been a great truck for the last three years. I have been on two trips to Utah with it and the truck performed beautifully on both trips. Pics available of both trips upon request. Please email me at smakee@gmail.com if you have any questions or would like to come see it.

1997 Antique Sage Pearl 40th Anniversary Land Cruiser
228,xxx Miles -
Factory front and rear lockers
Third owner
Modifications (all modifications done approximately 225K-227K Miles):
- Fresh alignment by Slee
- Dobinsons Adjustable Rear Upper Control Arms
- LandTank Extreme Duty Rear Lower Control Arms
- Dobinsons MRR 3-Way Adjustable Shocks for 6-7” lift (Long travel)
- Dobinsons Front Sway Bar extension set
- Variable Rate Tapered rear coils springs (3”)
- Variable Rate Tapered front coil springs (3.5”)
- Whiteline HD rear sway bar
- LandTank Heavy Duty rear sway bar links
- Dobinson adjustable front panhard
- Delta Caster Correcting Front Radius Arms
- Delta rear panhard bracket
- Brand new genuine Toyota 80 Series Front Brake Calipers
- DBA Front Slotted 4000 Series Rotors
- Hawk Super Duty Light Truck and SUV Brake Pads
- All brand new Genuine Toyota Coolant hoses
- All brand new Genuine Toyota Belts
- SLEE Extended Braided Stainless Steel brake lines
- Genuine Toyota heater T’s
- Red Line Land Cruisers Modified Blue Fan Clutch (HD)
- ARB OME Steering Stabilizer
- 4x4 labs rear bumper with jerry can and tire swingouts
- BumpitOffroad front tube bumper
- Prinsu roof rack
- Steering Stabilizer
- White Knuckle Rock Sliders
- Extreme LED 22” front light bar
- Comeup Seal Gen2 12.5RS winch
- Brand new Land Cruiser Heaven leather seat covers
- Kenwood DMX9707S Double DIN head unit with Bluetooth
- Kenwood CMOS-230 rear view camera
- 5 x Toyo Open Country 315/75R16
- New downpipes
- New catalytic converters
- New Magnaflow catback exhaust custom cut
- Slee headlight upgrade harness
- Slee Washer Fluid relocation kit
- Slee remote reservoir shock mount
- New windshield (5/2023)
- KISS Rear platform and drawer system
- Center Diff Lock switch and 7-PIN mod completed
- ScanGauge II
- 2nd Battery tray
- Front knuckles rebuilt using: Marlin Crawler Front Knuckle rebuild kit, Brand new Genuine Toyota drive flanges, Yotamasters knuckle studs
- DEPO Clear front corner and rear bumper lights
- New Amazon Hood and rear hatch struts
- Raptor Liner on roof and lower body. Original Paint sanded to bare metal, sprayed with two
coats of self etching primer, and then Raptor Liner applied.
- Previous Owner Records attached along with photos

Cons:
- Rear door actuators not working
- One front door pocket screw loose on each side
- Wood grain accents, not in the greatest shape

Video and additional pics in Google photos folder: 1997 40th Anniversary Land Cruiser For Sale - https://photos.app.goo.gl/MT6RTKchqG8ptjpC6
Previous Owner records and VIN in the attached PDF.

IMG_5917.jpg
 

Attachments

  • 1997 Land Cruiser.pdf
    727.5 KB · Views: 221
Last edited:
Absolutely gorgeous! And priced well for what it is. If I didn't have 3 projects in the garage i'd buy it in a heartbeat. Also, love the look of the two tone on the 40th color. Fantastic!
 
Absolutely gorgeous! And priced well for what it is. If I didn't have 3 projects in the garage i'd buy it in a heartbeat. Also, love the look of the two tone on the 40th color. Fantastic!
Thank you for the kind words.
 
Thank you for the kind words.
Located in Denver, CO
Asking: $27,500
Fresh Build with less than 3,500 miles on all mods listed below. This build was a COVID project for me and has been a great truck for the last three years. I have been on two trips to Utah with it and the truck performed beautifully on both trips. Pics available of both trips upon request. Please email me at smakee@gmail.com if you have any questions or would like to come see it.

1997 Antique Sage Pearl 40th Anniversary Land Cruiser
228,xxx Miles -
Factory front and rear lockers
Third owner
Modifications (all modifications done approximately 225K-227K Miles):
- Fresh alignment by Slee
- Dobinsons Adjustable Rear Upper Control Arms
- LandTank Extreme Duty Rear Lower Control Arms
- Dobinsons MRR 3-Way Adjustable Shocks for 6-7” lift (Long travel)
- Dobinsons Front Sway Bar extension set
- Variable Rate Tapered rear coils springs (3”)
- Variable Rate Tapered front coil springs (3.5”)
- Whiteline HD rear sway bar
- LandTank Heavy Duty rear sway bar links
- Dobinson adjustable front panhard
- Delta Caster Correcting Front Radius Arms
- Delta rear panhard bracket
- Brand new genuine Toyota 80 Series Front Brake Calipers
- DBA Front Slotted 4000 Series Rotors
- Hawk Super Duty Light Truck and SUV Brake Pads
- All brand new Genuine Toyota Coolant hoses
- All brand new Genuine Toyota Belts
- SLEE Extended Braided Stainless Steel brake lines
- Genuine Toyota heater T’s
- Red Line Land Cruisers Modified Blue Fan Clutch (HD)
- ARB OME Steering Stabilizer
- 4x4 labs rear bumper with jerry can and tire swingouts
- BumpitOffroad front tube bumper
- Prinsu roof rack
- Steering Stabilizer
- White Knuckle Rock Sliders
- Extreme LED 22” front light bar
- Comeup Seal Gen2 12.5RS winch
- Brand new Land Cruiser Heaven leather seat covers
- Kenwood DMX9707S Double DIN head unit with Bluetooth
- Kenwood CMOS-230 rear view camera
- 5 x Toyo Open Country 315/75R16
- New downpipes
- New catalytic converters
- New Magnaflow catback exhaust custom cut
- Slee headlight upgrade harness
- Slee Washer Fluid relocation kit
- Slee remote reservoir shock mount
- New windshield (5/2023)
- KISS Rear platform and drawer system
- Center Diff Lock switch and 7-PIN mod completed
- ScanGauge II
- 2nd Battery tray
- Front knuckles rebuilt using: Marlin Crawler Front Knuckle rebuild kit, Brand new Genuine Toyota drive flanges, Yotamasters knuckle studs
- DEPO Clear front corner and rear bumper lights
- New Amazon Hood and rear hatch struts
- Raptor Liner on roof and lower body. Original Paint sanded to bare metal, sprayed with two
coats of self etching primer, and then Raptor Liner applied.
- Previous Owner Records attached along with photos

Cons:
- Rear door actuators not working
- One front door pocket screw loose on each side
- Wood grain accents, not in the greatest shape

Video and additional pics in Google photos folder: 1997 40th Anniversary Land Cruiser For Sale - https://photos.app.goo.gl/MT6RTKchqG8ptjpC6
Previous Owner records and VIN in the attached PDF.

View attachment 3380677
what color is that primary?
 
Antique Sage Pearl
 
Will this pass Cali smog?
It passes CO. I don’t really know anything about Cali vs CO standards. Maybe somebody could chime in that knows such things.
 
Well, technically it should be able to pass Cali smog. That being said with my 80 in Cali it sometimes took going to the "right" smog shop in order to get it done. Just depends on how clean its running and what codes if any are being thrown or have been cleared.
 
Ugh... I read the smog laws in CO and it looks like it would pass in CA. Impulsive me wants it, but responsible me is making me think. I don't need it I don't need it I don't need it. Good luck with sale. If the price happens to drop by 5k at any point let me in, but I just can't afford it right now. Damn.
 
TTT

Forgot to mention, I have a couple other parts not installed that will go with it. New belt trim molding, an adjustable rear panhard and a few other items.
 
Maybe the panhard. I can send you details via PM.

But the belt trim I’ll be keeping with the truck. For what it took to find it, I want the new owner to have it available should they choose to swap it out eventually.
 
Ugh... I read the smog laws in CO and it looks like it would pass in CA. Impulsive me wants it, but responsible me is making me think. I don't need it I don't need it I don't need it. Good luck with sale. If the price happens to drop by 5k at any point let me in, but I just can't afford it right now. Damn.
DO IT!!
 
This is a turn-key truck that was built to keep (and you SHOULD be keeping it dude)!

His err is your win, he'll be telling the tale of this 80 he let go of for many years to come.:p Seriously nice build, everything is tight, clean, and done right.:cool:
 
Great looking rig. Any interest in trading for a Conqueror UX490 trailer??

PXL_20220527_044223805.jpg
 

Users who are viewing this thread

Back
Top Bottom