CruiserCult 60 Series Products and Literature (1 Viewer)

[Cruiser Cult]

I think I figured out a way too. At least in my head, I haven't put it to paper yet.

Excellent! Lets compare ideas and make a prototype.

 

[NWxDrew]

Excellent! Lets compare ideas and make a prototype.

I fully support your efforts on this! I’ve got these lenses on my 60 as well and was wondering if this could get done.

 

[Rabrownmkiv]

This style of Euro lens was for a side blinker, due to their regulations. No side markers there, at least not then.

View attachment 3530185

That photo is from my previous 60. I moved those lenses over to my current 60 though, still run ‘em. And no the lenses don’t make it a blinker - I’d need to reconfigure the electronics to make the bulb flash.

@Cruiser Cult didnt we talk at one point about how we could make the US spec side marker be fully lit when the lights were on, yet still flash with the blinker? I think that’s how a lot of the US spec VW/Audi vehicles work.

My 88 HJ60 Euro import runs these same side markers in the front, but they only blink with the turn signals. They aren't on with the running lights. No rear side markers either.

 

[Rabrownmkiv]

Any idea where to find new ones? Only place I know of I ordered them but it's been a few months and still no shipment.

 

[Cruiser Cult]

Any idea where to find new ones? Only place I know of I ordered them but it's been a few months and still no shipment.View attachment 3530879

Have you reached out to Maarten at Cruiserworld.eu ? I bought my set from him.

 

[Rabrownmkiv]

Have you reached out to Maarten at Cruiserworld.eu ? I bought my set from him.

Did not know about that site, thanks for the tip!

 

[Cruiser Cult]

Did not know about that site, thanks for the tip!

Super nice guy and has lots of Euro parts.

 

[CruiserTrash]

Did not know about that site, thanks for the tip!

I'll second the suggestion for Cruiser World - that's where I got my Euro/Scandinavian spec side marker lenses. Shipping from the Netherlands wasn't really that bad. The ones you're showing I think were from some parts of Europe and Africa. I may be wrong, but the limited evidence I can find points to that.

 

[NWxDrew]

Any idea where to find new ones? Only place I know of I ordered them but it's been a few months and still no shipment.View attachment 3530879

I got some lenses from amayama.com

81741-60061
81731-60071

 

[Cruiser Cult]

All orders placed during our New Year holiday shipping pause have shipped out! Thank you all for your support and patience.

 

[Cruiser Cult]

Our Kill Switch harnesses for the F, 2F and 3FE are back in stock. We currently have a few on hand with more in production.
Easy to way to help prevent theft and easy to install.

 

[Rustyj41]

Could you PM or text me? I’d like some more details on a switch for a 60.

Jeff
6027699800

 

[Cruiser Cult]

Could you PM or text me? I’d like some more details on a switch for a 60.

Jeff
6027699800

Will do!

 

[Cruiser Cult]

HVAC LED light prototype #2 is headed to our SW Division , aka @NookShneer , for testing .

 

[Cruiser Cult]

Our first Koito fogs using genuine OEM Yazaki wire rolling off the line…I mean my work bench. Rectangular or Round, Both kill it in foggy and snowy weather.

 

[NASHWAN]

Hey everyone! An introduction for our small enterprise. We have mainly been on Instagram, and a little here in the classifieds on mud, but are all LOOOOONG time Mud members. We are a group of like minded cruiser-heads who wanted to come together and not only share our love for these amazing vehicles but develop some cool products for them as well. Check out our IG account @the_cruiser_cult and www.cruisercult.com for more info on us and what we have been up to! Lots of great content from historical facts, literature, interviews with experts in the cruiser world and our own generated content.

In addition to that we have been ramping up development of products and wanted to have a dedicated thread to share these projects. A lot of thought goes into everything we make so why not share that with you all.

I installed a new carburetor in my 1986 Toyota Land Cruiser, but sometimes it starts to shudder and emits a black color from the exhaust. I am sure that there is a problem with the wiring connection , and I do not know where to start. I hope you can help me, because all the electricians fail to find out the reason.

 

[Cruiser Cult]

I installed a new carburetor in my 1986 Toyota Land Cruiser, but sometimes it starts to shudder and emits a black color from the exhaust. I am sure that there is a problem with the wiring connection , and I do not know where to start. I hope you can help me, because all the electricians fail to find out the reason.

Hello Nashwan,
We are definitely not carb gurus, but I would suspect that the new carb is maybe not fully tuned. Is this a new aftermarket carb? Because sometimes even those have issues. Have you run through the FSM on tuning it correctly? What makes you think its something electrical? I would start your own dedicated thread here in the tech section so people will see it and offer helpful advice. There are some serious carburetor gurus here on the board that can help get you sorted.

 

[Cruiser Cult]

Finally have some stainless brackets back in stock . Got these TIG welded last night. Ready for adventure!

 

[Spook50]

That reminds me I still need to get a pair of steering knuckle light brackets....

 

[Cruiser Cult]

Up today is one sweet 1988 French Brochure! I love the spec on this one. Great stuff.