3D print thread

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

primeral

primeral

Joined
Aug 9, 2016
Threads
10
Messages
98
Location
Sugar Land, TX, USA
Hello again, Mudders. I swear there was already a 3D printed thread floating around somewhere (also checked the FAQ, to no avail) but I guess it was Mandela Effect? If there is one that my search couldn't find, please point me there so I can add to it. If it doesn't yet exist, then I'll start one.

100-series radio bezel
bezel.webp
bezel closeup.webp
bezel 3d.webp


3D printed trunk tool kit, optimizing side compartment space usage
img_2567-webp.3990357
4-webp.3992039


img_2565-webp.3990354
img_2566-webp.3990353


3D printable magsafe charger that replaces the factory ash tray
installed-webp.3984326
normal-phone-webp.3984333
capture-webp.3984246


3D printable ash tray blank CAD file, that you could use for switches, lights, whatever
1754987313910-webp.3969465
img_2239-webp.3969496


3D-Printed Center Console Storage Panel
img_3457-webp.3948036
img_3469-webp.3948037


3D printed control box
img_9464-webp.3843394
img_9462-webp.3843396


Toyota/Lexus 3 Button Remote Key Case/Shell
ec5024e8020c477949b52013c5c0e69e_display_large.JPG
aa0891474dad68a56e2790db974ea5bb_display_large.JPG


VSC On-Off Switch
signal-2026-02-03-232714_002-webp.4080284
signal-2026-02-03-232714_003-webp.4080285


Bigtex's Windshield Washer Fluid Filler Cap and Center Console Panel Blank
cap-webp.4075271

plug-webp.4075273


Please add to this whatever I missed. Credit goes out to each respective creative individual. I'm especially looking for switch blanks and antenna delete cover, if anyone has modeled them in 3D already.
 
Last edited:
cool, thanks for sharing those. I'm about to start on my first 3d printed parts, some covers for the unused fog light holes in my coastal offroad front bumper... Once I get the cover set in a way I'm happy with I'm tempted to make a little stash space out of them if I can find a way to make it useful.
 
This could be a cool thread.
Sharing 3d print designs is pretty popular in some other forums. I hope it catches on ... (no offense to @BenCC who makes some of the most bad ass stuff for the hundo)
 
Yes, excellent idea. We have a 3D printer and I am about to start printing some of the parts. Some we can create ourselves but some require a scanner which we don't have yet. Any suggestions on what scanner to buy?
 
NearJetties said:
@LJE too
Click to expand...
Definitely love seeing what people come up with! I supported the open-source community for a long time (have been building/designing printers since 2014), but only recently decided to make it into a side business. I always support people using their skills to create new things!

Vthelexus said:
Yes, excellent idea. We have a 3D printer and I am about to start printing some of the parts. Some we can create ourselves but some require a scanner which we don't have yet. Any suggestions on what scanner to buy?
Click to expand...
Back when I dug into this last year, the Einstar Einscan was about as cheap as you could go with it still being useful. I've definitely gotten a lot of use out of mine! It's definitely not a magic-wand & takes a different set of skills to work with meshs compared to purely solid-model CAD, but it definitely opens new doors.
 
You must log in or register to reply here.

Share this page

Back
Top Bottom