2F or SBC

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 15, 2005
Threads
51
Messages
508
Location
Wisconsin
so i got a question im sure alot of people will have comments about. well i was looking to put in a sbc in my 40. i have thought of doing this before about this time last year. got everything out of it and decided hell with it dont want the land cruiser anymore im gonna sell it. so i put everything back together ended up rebuilding the carb putting a distibutor in it and endless 2F things. right when i was done i had to go take it a for a drive. well you can see where that took me im here a year later still have it and enjoy it more then the other 5 vehicles i have. so my question for everyone is! should i take the 2F out and put in a SBC that i have or should i just run the 2F. im sure there is a prefrence for everyone but i gotta ask!

hope this question can lead to a long discussion because im really back and forth on the subject!

cant wait to see tomorrow what people have to say! thanks again everyone for reading and posting! :cheers:
 
i propose a new rule. anyone with less than 100 posts cannot ask about 2f vs V8, best lift kit, how to do disk brakes or what size tires one can fit.
 
I say it depends on your needs and preferences. I've had several 40's and was never really pleased with their performance on the road but, then again, they weren't made to run 75 mph on the highway.... So, on that note, the 73 I currently have is powered by a sbc 283 and I can say I am thoroughly pleased. It's not a racer and is not meant to be. It is not my DD either but I do drive it to work once in a while which is approx. 20 miles one way and it allows me to keep up with traffic just fine or, gives me that extra boost when I'm offroad. It is a hard choice but if done correctly you will not regret it.... unless your a purist. then.......
 
Nothing sounds like a V-8. I love mine. Parts are easy and cheap to get. I have had 2 cruisers with 8s and would never go back. Just my 2 cents.
 
I second llih, the sound is sweet! I had actually never owned a car with anything bigger then a 6 up until I bought my 40 last spring. I was cruising through a tunnel with it and layed on the gas and the sound that resonated was bitchin'! I have almost no experience working on motors and all that stuff, so I figured going the V8 route would be easier to learn on, although I'm the stock motors are fairly simple to work on.
 
just do what you want with it.

most people have biased opinions anyway according to what they have now.


If you want a 2f keep it, if you want a sbc put it in. don't let people tell you what to do with your cruiser.


Personally, If I had strong 2F I would not swap it, but that kinda depends on what kind of sbc you have sitting around also:D
 
yes, who cares what anyone else tells you, the choice is yours. do what you want to.
 
Be different..swap in a 2 stroke Detroit diesel..you wanna talk about bitchin sound!

I have 2f in my 45, and sbc350 in my 40, and love them both.

A sbc can/is wayyyy more fun. You push hard on the skinny pedal and all sorts of carnage can ensue. And I also thoroughly enjoy putt-putting around with the 2f powered fj45. Its like taking the road less traveled, at a nice leisrurely pace.
 
If it aint broke.....dont "fix" it.....
 
that's like asking do you like blondes or brunnettes.

Well S&*T I like both!

:)

Noah

That's a good way to put it. They both have advantages. A 2F with good maintenance will run over 400k, and can be built into a stump puller. Plus, the truck comes set up for it. A 350 has probably the best aftermarket available, and can be built to suit whatever needs you may have...and sound awesome in the process. The purchase and installation will add up fast, though.

All depends on your needs and your budget.
 
yes, who cares what anyone else tells you, the choice is yours. do what you want to.

I agree.

It is your money and your vehicle.. Build it the way you want.

A well maintained SBC will last just as long or longer than a 2F. 2F engines are good, but they are not bullet proof as you think.
 
It is truly your choice, i bought a 40 with the 2f and decided with the torq of it i would just run it til it die's (if ever) then think about the SBC. i also agree with the 283 or 327 deal over the 350.


of course thats just me and my .02 worth. and i'm getting old and don't need to go fast in the sierra's.

Good luck ..


Cheers ..:beer:
 
It seems this question has been asked many times and will be asked and agian and agian. And it's a valid question to say the least. They are both totally two different power bands. Have you considered in ways to lessening the wieght to make it lighter:). Just a thought. Anyhow, If you do a search you will find all kinds of info. Everyone has there reasons. I have left mine alone because it gets the job done and that's how it came out of the box. But since we are on the subject I would at some point like to convert one of mine over to a straigth six diesel because of the low end torq and mpg gained. In the meantime, I'll wait for an auto maker here in the states to make a diesel that will not require a springover as a prerequesite as part of the mod.
 
Back
Top Bottom