starter

  1. C

    Starter problems - solved

    Thought I would share this as well, hopefully it helps. Pretty easy fix that anyone can do. For a few weeks I had the odd intermittent issue of the starter not turning. There would be a loud audible click from the solenoid activating the gear pushing out, but no crank. A simple fix always...
  2. imnrut

    Painless hot shot kit (30202) install

    By chance, would any of the folks that have used this kit for starter issues mind chatting with me? I'm at a standstill in regards to wiring it up. Thank you for any help
  3. jomichael

    91 FJ80 Starter Install with Pictures

    I've been dreading the day that I commit to replacing my starter and cables. I bought the cable kit from @Fourrunner back in January because I have that intermittent non start issue. I also decided to get a remanufactured Toyota starter from the dealership. Yesterday was the day and though it...
  4. Rapt

    Not Starting

    My FJ80 started randomly not starting. When the key is turned there is one loud click but doesn't start. I can hear the fuel injectors pumping fuel in. Battery is fine, spark plugs are fine. I'm guessing starter but with one loud click and no other noise I'm not for sure. Typically if I would...
  5. mattressking

    For Sale F/2F/3F/3FE Starter terminal insulator boot

    This is the boot for Gear Reduction starters with 20mm OD insulator ring, aka 28100-60070-84. The insulator boots I’ve found for sale don’t actually fit the insulator ring because they are 30mm, which wasn’t acceptable to me for this starter. $20 shipped each. 9 available.
  6. joekatana

    Question for the starter motor gurus

    So I have been working on a 1HZ/H55 swap in a South American FJ73 . As the wiring harness looked more like a decomposed rats nest I pulled that out and swapped a complete 24 volt euro spec hzj73 witing harness in it . I looked at all my best 24 volt electrical parts for this and put in new...
  7. joekatana

    SOLD 3B 24 volt starter

    Slowly cleaning up shop and listing some parts , this is a starter motor I removed from a 24v BJ75 troopy , it was working when removed . Great to have as a spare or use the guts to fix your 24v B 2B 3B 13BT 1HZ starter 150$ plus the ride
  8. chriwi

    Wicked electrical problem, 1980 BJ40 diesel

    Looking for help to clear my stupidity on this please. Had a starter failure, pulled it-had it rebuilt (twice as the shop had it reversed the first time). New rebuild clearly has "12V" sticker on solenoid housing-but they assured me no prob. First startup and test drive (<5min) no problems...
  9. MrMacdugal

    For Sale Mass. FJ40 starter maybe?

    I inherited this rebuilt starter with a box of parts in a 60. This starter obviously does not go to a 60 series, but looks like a starter for a 40? Does this look right? I can’t find any info on it online other that matching it up to similar starters. Can anyone definitively tell me if it’s for...
  10. JohnnyFish

    starter ground attach point?

    On a '96 1fz, there's a ground wire in the harness close to the starter power wire. Where does that ground attach? Frame? Starter bolt? I'm swapping an engine from a wreck and failed to document where I detached that one. Thanks.
  11. R

    95 FZJ80 STARTER WIRING DIAGRAM

    Hi Guys Ime new to the Forum so iv had a bit of a search and cant find a wiring diagram for the starter motor on here anywhere exept for the ones you have to pay for, has anyone got a diagram please. FZJ80
  12. Jczajka

    SOLD PA: 100 series starter rebuilt kit. 98-02. Plunger, contacts, gaskets, seals, vents

    100 Series Starter rebuild. Full parts kit. For 1998-2002 100 series models & 2000 Tundra $50 Includes all major and some extra parts to rebuild starter. Plunger, contacts, seals, and vent tubes (that often crack). MSRP $85-90 Includes: 28235-54380 - Plunger, Magnet Switch 28226-72010 -...
  13. B

    FZJ80 owner @ Zion

    Hi there, I brought this beast out from Maryland, luckily not much rust, as it was originally from the SW anyway. Since buying, I've replaced the tires and battery, done what I could with the undercarriage rust, probably needs a new starter. It has aftermarket seats and a new stereo. Spare tire...
  14. O

    What hose should connect here?

    Replaced my starter and valve cover gaskets. Got everything back together, but seem to be missing this. Also not sure if that ground belongs on the engine lift bracket.
  15. dfarley4504

    SOLD Starter motor Bosch

    This was pulled from a 1976 2F Bench tested at Carquest. Works great. Make me a fair offer, shipping is 15 bucks.
  16. OmegaDude

    Starter Problem need advice

    I have been chasing a white rabbit for a long time dealing with my starter on my 1996 FZJ80, and I need a fresh set of "eyes". The problem I am getting is when turning the key, nothing happens. You can tell power is being drawn from the dimming of lights, but no starter action. In the past, I...
  17. otown

    FJ60 No Start

    My recently acquired FJ60 (340k) suddenly won't start. Won't crank. Won't even click. Turn the key on, have power, turn to start...nothing. Tried jumping, no luck. Was previously making that low rah-rah-rah sound when cranking indicating either a dying battery or starter. After some...
  18. W

    Starter replacement

    First time 70 series owner. I’ve got a 1988 75 series troop carrier. It has 300,000km on the clock and Australian owned. I believe my starter has just died. What are the main causes? How much would it cost to get professionally fixed? Any general tips? Also, some general questions. where...
  19. samc2447

    SOLD HJ47 bellhouse flywheel starter

    Client is going a different direction. Selling off this HJ47 bellhousing, freshly machined flywheel and rebuilt and converted to 12V starter. This bellhousing bolts to the H series engine (12HT, 2H) and uses the factory mounts on a 40 and 50 series frame to support the transmission. Have...
  20. samc2447

    SOLD HJ47 bellhouse flywheel starter

    Client is going a different direction. Selling off this HJ47 bellhousing, freshly machined flywheel and rebuilt and converted to 12V starter. This bellhousing bolts to the H series engine (12HT, 2H) and uses the factory mounts on a 40 and 50 series frame to support the transmission. Have...
Back
Top Bottom