shift

Hey guys, I have a 91 fj80 that shifts perfectly through acceleration. The issue is in 2nd gear and letting off the gas pedal, I have a hard shift/clunking noise. This is the only time it happens and only if in 2nd gear and release of Gas does it happen. Any thoughts or help will be greatly...

FJ80 Only for Years 1991 - 1994 and 1995 - 1997. ECUs are for 1993 and 1994, Also ECU for 1995 - 1997 ABS controllers for 91-92, 93 - 97 Power Window Controllers for 91 - 97 Power Door Lock Controllers for 91 - 97 Tailgate Lock Modules 91 - 97 Shift Controller for 93 - 94 Only It will help...

out of a 73 part out. Completely restorable. Blast and paint. $50 shipped

I have read countless threads and still can't figure out how to fix my problem. 1994 land cruiser when put into drive, won't down shift to first, just try's to start out in drive, I can manually shift to 1st then 2nd then 3rd and it works great, and then mashing on the throttle it won't down...

Hi all, been reading this forum for a while but finally made an account to post. I have a 2000 LC and noticed that when cruising on the highway in o/d (4th gear) with the torque converter locked and I give it a bit of throttle the unlock of the torque converter is a bit harsh, nothing crazy just...

1986 4runner Automatic Installed a budbuilt crossmember that didn't exactly fit correctly, so he shipped me spacers and it required 2 to remove the interference with the bottom of the case. Now, I'm stuck in 4WH and the shifter but it into 2WH or 4WL. The shifter moves but feels as if its...

Hello from a new member here. Trying to put together a basket case fj and need some help with how the shift linkages connect. If anyone has some pictures it would be greatly appreciated

Swapping the 3-speed for a 4-speed in my FJ40. Want to also swap the glove box shift place for the one that matches the new trans. Anyone have one?

UPDATE: April 22, 2017 There is a video a few posts below, showing off the sounds this thing makes. ---------------------------------------------------------------------------------------- ORIGINAL: Before my buddy tucked his 73' 40 away for winter, he one day suddenly had difficulty shifting...

Anyone have an original direct 3 speed instruction plate that mounts to the glovebox door? I know reproductions exist but I'd like to keep it all original. Thanks.

Trying to trouble shoot this P0773 issue in my 80 since rebuit my engine couple yrs ago. Replaced solenoid #3 (#35250-50030) and confirmed that it's dead. Pull battery to clear everything , no code in ODBII. Go for a drive until trans is hot, ODBII read P0773 but no CEL. Some time CEL pop...

I am converting a vacuum actuated split transfer case to manual shift and I need a shift fork. Thanks Scott

Getting real with myself about what I want to do with Mark's Off Road over the next couple of decades I just don't see myself bringing this rare adapter to market. I've watched the thread on it get bumped years after year, but I just never got around to finding someone with the tooling to make a...

Ordered this by mistake since I've got the factory xfer shift pattern, been sitting in my garage for years. This is the original AATLAS etched plate, not the newer printed. $30 shipped.

I had him check that the OD button wasn't pressed. One day it was fine, then it wasn't. Is this a known issue with the 2000? No wheeling. He recently bought the rig from the original owner and it was very well maintained and never wheeled.

I have a 4.7 V8 Series 100 LC. When you move the shift between Reverse and Drive the whole car is moved as the gears lock in and visa versa. It is a really hard knock and the torque is considerable. I have checked the transmission box and valve body and I am in the middle of trying to...

Hi all I have a conundrum. I have a series 100 1999 V8 4.7L - (2UZ-FE) AUTOMATIC The computer diagnosis shows the shift position as in 2nd (when shift stick is in P - park position) as 4th (when shift stick is in R- Reverse position) 2nd (when shift stick is in N - Neutral position) and no...

Used 40 series 4 speed shift nob. It's in good shape, just has some typical scratching on the shift pattern sticker. $19 shipped conus.

I went with a twin stick so these are available. Includes: inner & out boot, metal ring, shift knob. The outer boot looks very good, the inner boot fair. $35 shipped USPS flat rate to any US ZIP code.

I've read a ton of threads on problematic A442F transmissions not shifting correctly in Drive. My '93 is doing something very similar. In Drive, the truck seems to be starting out in 2nd or 3rd gear. If I shift it down into L1, it takes off like it should and I can continue to manually shift...