I'm looking for part 90215-09003 and apparently it's discontinued. Is there a suitable replacement, or can someone get some good photos at least? For the H55F, part is highlighted in this diagram
I am going to do the solenoids on my 94 as I’m starting to experience some poor shift behavior.
I know there are the 4 shift solenoids but no one seems to mention the pressure control solenoid. Is I needed as well or only the shift solenoids? Can it be replaced just as easily?
“Core” Leather Shift Knob for 80 series. Not in bad condition, just a few spots where stitching is coming undone. Ready to send out to be rewrapped without downtime or just run it if yours is in worse condition. $25. Can ship out. Buyer pays shipping.
Hey all,
My apologies if there's already a thread. I searched and couldn't find one. Wondering what the standard shift points for a A442F hydro trans for the early (1992) JDM turbodiesel should be shifting at? I have a suspicion mine is shifting wrong. My shift points when left in D is...
Any one want to guess how many different shift patterns and drive trains there are for the FJ40?
Well I’ll tell you it’s ridiculous. I’ll tell you at the very end of this post.
I recently learned Advance Adapters makes a transfer case that you can connect an Automatic Transmission to. So after...
Hi h8ers,
a bit of a transfer case issue going on…
My 1975 stock fj40 does not shift from 4 low back to 4 high every time. Every 4 or five times I off-road it, when I shift back into 4 high, it does a buzz-wherr when I drop the clutch, and doesn’t move forward.
I have been able to get it to...
I can shift the transfer case high neutral low easily. But nothing happens when it's on neutral or low. The SUV doesn't move. When I shift to high, it moves. My parents have been driving this way for about 10 years. I planned on fixing this issue. Give me some ideas! Tomorrow I plan on changing...
Well, the shifter broke off. Any body have this part or an old steering column that it could be pulled off of? I ordered online somewhere, but it's on nationwide backorder.
I was able to find the other broken piece, no problem, but this one seems a little scarce at the moment. Appreciate you...
Well, looks like my number is up. Over the weekend I started having transmission trouble. My truck is a 1994 FZJ80 with the A442F transmission. Unfortunately, the O/D light is out so I can't get codes from it. Checked engine codes and there aren't any.
Anyway, when I put it in D I get no power...
If I floor it from a stand-still, the truck will accelerate and shift 1-2 @ 2,200rpm, then 2-3, @ 2,200rpm, then it'll stay in 3 until I let up and it'll shift to 4. From a slow cruise, say 20mph, if I floor it, it will not downshift. I can manually shift the trans normally. AFTER doing that...
Nice condition. Black Rubber, not leather, you will reuse your existing wiring wit overdrive button to save yourself from a massive amount of unnecessary work. . Small crack at bottom where it cant be seen.
Hello,
I am looking for a linkage member for my 1967 FJ40. I have the original dash mounted, vacuum-assist 4wd, but the link I have, (shown below) I believe is for a 4-speed and is about 2-3” too long. I am hoping to avoid cutting this down and rewelding it to the correct size, so please let me...
89 FJ62 automatic. When accelerating in first, have strong vibration/shudder at about 1750-1800 rpms. Whole truck and especially the steering column shakes, then smooths out after about 1800. No other gears do this.
Also, when at a stop, when transmission drops into first there's a bit of...
Selling this T-Case Lever from an FJ62
Sleeved brass bushings added to the shift points
no rubber bushings needed, works really well
$60.00 + whatever shipping
Please PM
I had the trans and t-case rebuilt on my 5/1977 FJ40. Upon reassemble I am finding that the transfer case shift lever does not clear the shift guide bracket when attempting to put it in neutral and L4. I can disconnect the shaft from the linkage and manually move the t-case through all...
Hey guys,
I have a 91 fj80 that shifts perfectly through acceleration. The issue is in 2nd gear and letting off the gas pedal, I have a hard shift/clunking noise. This is the only time it happens and only if in 2nd gear and release of Gas does it happen. Any thoughts or help will be greatly...
FJ80 Only for Years 1991 - 1994 and 1995 - 1997.
ECUs are for 1993 and 1994, Also ECU for 1995 - 1997
ABS controllers for 91-92, 93 - 97
Power Window Controllers for 91 - 97
Power Door Lock Controllers for 91 - 97
Tailgate Lock Modules 91 - 97
Shift Controller for 93 - 94 Only
It will help...