rotors

Replaced all the parts you see in my truck with brand new stuff. I'm not wheeling and I don't have space to store so I figure it should go to a member who can put them to use as trail spares or re-condition them before putting them in their rig. The part that looks the worst is the driver side...

Well, I placed my 1st RockAuto order. Picked up a set of loaded calipers and rotors for the 1980 FJ40 front axle rebuild. The rotors have the partial GCX corrosion coating and the calipers come with the gold colored corrosion coating and ceramic pads. I will update this post with actual pics...

1996 Land Cruiser KJZ78 with electric hubs Replacing front brakes and rotors

So, I am looking at putting 35's on my 09 LC here in the near future and figure at that time I will also re-gear it. Thinking 4:56 or there about. But I was also thinking being able to stop would be nice. For those with 35's did you get bigger or vented rotors to help with stopping?

SoCal FRONT ONLY FRONT ONLY FRONT ONLY Please specify year of your FJ80 since 91-92 uses a different system. Also have axle housings, steering arms, etc. Prices range from $40 to $125

Anyone here used the STOPTECH drilled/slotted rotors OR Brembo regular rotors none slotted/drilled Like to hear your guys thoughts on these rotor options. Thanks!

Hello all, I am looking for a trustworthy service shop in the Jacksonville, Florida area. My vehicle is a 2006 LX 470, and I want to have the front hubs, CV, brakes (rotors, pads, fluid) fully serviced. I typically do this stuff myself, but just don't have the time right now. I am going to...

I have a 2016 Land Cruiser that experienced brake pulsing not felt through the pedal. While driving it on the interstate brakes are used to maintain intervals with traffic. This is when the whole vehicle would vibrate under a light load on the pedal. It was noticeable in the seat of the pants...

Quick question: I ordered some new rotors for my 1998 HZJ75. I am currently at the stage that I have removed everything, but I have no clue how to separate the current disc from the hub. I have the 6 lug nut version and there are no additional bolts or threaded holes foreseen in my current set...

Has anyone been able to make slip on front rotors work on a FZJ80? or does anyone have a kit? FROR has a kit for the 79-84 pickup/4runner axle, but nothing for the FZJ80. I asked them if they were going to make a kit for it, they said they were looking at it and to stay tuned, but that was a...

I've searched on here and found s few threads, but nothing definitive. What are my options for pads and rotors for the 91'HDJ81. I've read that the pads are compatible with US based FJ80's. What about front and rear rotors? Thanks for any help!

* THE DECISION PROCESS AND INSTALL REVIEW -I bought my 2006 Lx470 with 140,000 miles and the brakes felt like they have been on there for as long as it has been driving. The brake pads where almost down to the metal and the rotors were as wavy as the mint 400 race course. -I was faced with...

I purchased from performance brakes for the front of my 1994 FZJ 80. I never got a chance to install them. Two premium black dimpled and slotted front rotors with premium metallic pads. Cost alittle over $200 brand new. Selling for $150 plus shipping. They are heavy so I prefer local pickup in...

Trying to find a factory fit brake rotor upgrade for the front of our beloved Toyota Land Cruisers, with out breaking the bank has been next to impossible - UNTIL NOW! We are offering these Red Line Drilled and Slotted Land Cruiser Rotors for 8/80 - 1/90 40-Series / 60-Series / 70-Series Land...

Free to a good home - you pay shipping from 24014. Swapped out the front rotors and pads on my 100 for slotted rotors and ceramic pads. The swapped out ones have less than one year / 10k miles and are in good shape - I just wanted all new on all four corners as it is my 16 year olds daily driver.

For sale. 200 series rotors Front rotor set OEM. 125$ Rear rotor set OEM 125$ Plus shipping. These all have less than a mile on them. Basically they were driven off the trailer, on a boat, back on a trailer and finally off again. They all still have the machining marks on them. We're...

Yes I did a search and didn't find much on this and I want to stay with " Vented " ONLY so NO Cross Drilled or Slotted ( It's not a race car !! ) Mr. T's price is big $$$ but wanted to stay with a quality rotors for sure. Lots of choices Stop Tech , EBC, Centric , Etc. What's been working for you ?

Does anyone know the diameter of normal brake rotors on a 100 series land cruiser? Specifically the front? As many of you know, the front rotors are machine pressed on. I recently found a mechanic who said he could turn the rotors without remove them...only if they are less than 16 inches in...

Recently purchased a 2001 Landcruiser with about 180k miles and noticed a wobble when I brake on the highway, it seems pretty severe but no real pull to either side. Also vibrations through the floor and seat. The brakes and rotors were done about 30k miles ago at a toyota dealership, any chance...

I recently changed my FJ62 to the tundra caliper and rotor setup. So I have a set of front 1990 Toyota Forerunner calipers that I took off of my FJ62. These calipers have the 4 large pistons verses the FJ/60/FJ62 calipers with the 2 small/2 large piston set up. These have only been used for...