I have a 93 Hzj73 that needs a radio. If have read multiple opinions on the 24v system with accessories. Does anyone know confidently if I can use a 12v stereo, or do I need to convert it using a step down converter? I would like to find a similar era Toyo head unit to install and most have...
hi All
I have error code on RR speed sensor and bought replacement for it. Removed the mounting bolt with no problem. But have now fought with it for last hour and cant get the sensor itself out. It doesnt budge when i insert screw driver wedge under it. Soaked the thing with penatrating...
Looking to order a bolt on ready head replacement this week for my 95 series. Seems like a few reliable options out of Australia - the one I have been in communication with is Mr Cylinder Head.
Looking for some advice:
1) Mr Cylinder Head in general: anyone had any bad experiences? The kit...
Hi 80 series owners. I've a 1990 VX with the hand throttle cable that attaches to the top of the accelerator rod.
Recently and for no good reason, the pedal stopped returning to the un-pressed resting spot.
Took the pivot mount off the firewall and had a play around, and realised the...
Currently I have 4.25 turns Saginaw box in my 40, and I hate it .. So sloppy and floaty-like. I would like to go with 3.5 turns instead but can't be sure of the correct part number. It should be 4 bolts and 13/16 input shaft size. any help with the correct part number would be appreciated.
Trying to replace the crappy aftermarket driver seat that it came with in my 73. Read through a bunch of threads in seats but the one lingering question I have is about the slider rails. Currently, there is an aftermarket recaro base with welded on rails attached to my suspension base. If I look...
Just received headlamp replacements from Ebay and the high beam connection is different than original (and also different then pict in listing ) . Bulb does not fit. Have reached out but hoping to have done this weekend.
'03 LX470
https://www.ebay.com/itm/195911990455
Anyone experience this...
Hello,
The windshield on my '17 apparently got hit by a rock at the top and now has several feet worth of cracks spidering out. The local Lexus dealer gave me the number for the glass shop they use. That shop's supplier doesn't have the glass in stock, but they said I could bring my own in...
Hi,
So, my igniter broke. I can’t see the model number on it and I am afraid of purchasing the wrong one. Can some please recommend a good replacement for it? I have a 1983 Land Cruiser FJ40.
It looks like this is it. But, an experts opinion would be awesome...
Ive been piecemealing our builder grade hvac/heat for 23 years now, and it may be time for replacement. I have a flame rollout switch that has been tripping the last two nights. My burners are oriented vertically, with flame rollout switches at the top and bottom. Its always the top rollout...
Thought I’d share since I know lots of us have worn leather on the shifter handle. Took a gamble and ordered a replacement cover from AliExpress for ~$20. 100% satisfied with the results. Just don’t be a dummy like me and attempt to take apart the O/D switch.. just de-pin the connector under the...
Trying to find a good Land Cruiser mechanic to perform timing belt/water pump service on 2005 UZJ100. Any recommendations? Preferably in the South Bay/Harbor City area. Thanks.
This might be a stupid question but I can’t get ahold of CCOT and I can’t find anything online. Does the “L”/“R” side face up (not into the metal on the door) or does it face down?
It seems to fit better with the letters up, but it’s also an uglier seem. The picture below is with the letter...
I own a 2010 w/ 40k miles - everything stock except for BFG KO2 285/65/18, OEM coil spacers, and Slee Sliders
Any recommendations on the easiest/best way to add 1-1.5" lift, improve vehicle nose dive when braking hard, as well as improve cornering/handling and firming up the lean? The stock...
I was swapping my old vacuum lines for fresh and snapped one of the plastic nipples off what I think is my HACV, high altitude compensator valve.
I checked on mega zip to Id it, pretty sure it's th HACV, and it shows discontinued.
US there a later valve I can replace it with?or am I down to...
Hi there fellas,
Talking about weatherstrip, I’m working on a 97 LC that has the DS front door weatherstrip ripped close to the door hinge area and need to ask a question about it.
Is it possible to remove the old weatherstrip without breaking the clips that are connecting the rubber to the...
I’m in the process of replacing the glasses on my oil plan. There is a post from @Poser that I have been using as a guide. He uses a carquest supreme black gasketing silicone sealant for the corners and on the saddle of the gasket. I couldn’t find anything similar at the auto parts store so I...