replacement

We have some tired Hella H4 E Code headlights that do not put out a lot of light. Any recommendations for a bulb replacement?

-

I’m in the process of replacing the glasses on my oil plan. There is a post from @Poser that I have been using as a guide. He uses a carquest supreme black gasketing silicone sealant for the corners and on the saddle of the gasket. I couldn’t find anything similar at the auto parts store so I...

Need replacement rear crossmember that is rust free and unmodified for 80 series. PO cut mine up!

Hello everyone. I need some help, so I recently replaces my rotors and pads on my 2009 Land Cruiser and I was pretty careful with the insulation but I hear metallic sound from nearly all corners. The fitment was tight but something is just not right. Any help on remedying this would be helpful...

I did this over the last three days (kind of.) I had a suspect inner tie rod on an original steering rack on my 2006 GX470 with 185000 miles, a filthy reservoir, and a desire to not touch the front end again for a long time. I recently replaced the LCA bushings with toyota ones, 555 lower ball...

Hi, everyone! My headlamps are both cracked on my 1994 FZJ80. I want to replace them with new ones... But there's very few used options available. And the ones that are for sale aren't that nice and are VERY pricey... Has anyone used these Depo Euro Glass headlamps that are for sale on Ebay...

I have a 02 LX470. The AHC is not functioning as it should and I think it’s time to replace it. I’m not rock crawling or hardcore off road. Mostly city driving and weekend adventures that find us on dirt roads and camping trips. I was a simple but reliable suspension, plus a new baby means I...

Hi all, Hoping to get some guidance. I have 19 Premium, 37,000 miles which has been diagnosed with a left rear bearing failure by the dealer. I've been chasing this one a while.. Humming noise starting around 30, gets worse at 40 and up. Since the car is Certified Pre Owned, I took it to the...

Im looking to take My 1997 LC ( 267K 1FZFE inline 6) to a shop to have The head resurfaced and appropriate gaskets replaced. Ive seen similar post, but from 10 to 15 years ago. any idea what it might run ( low to high end of price) it overheated and i pulled it over and limped it home after...

I need to find someone who can replace my windshield in Northern Kentucky. I had safelite come out and they wouldn’t touch it because the previous owner glued the glass on and didn’t replace the rivets. Can someone please help????

Does anyone make replacement ends for the shift linkage? Thanks

My LX came with 2 missing, one torn and the other stained. A little diy project that takes longer to take the door panels off than to do the replacement.. Supplies: Speaker Grille Cloth Scissors Razor Adhesive 1) Remove door panel 2) Unscrew speaker grille 3) Measure and cut cloth...

Hello, I have a 74 fj40 with an F engine. It has turned the odometer numerous times but still runs fair. I live in a remote location and a 77 fj40 F2 with only 110,000miles is available. Wondering: 1. is it worth getting for parts for the F? 2. how much adapting would be needed for a switch-out...

Trying to bleed the drum brakes, and got leaky drivers wheel cylinder. Thinking about replacing all 8. Any recommendations on brand and where to buy. Also, are the wheel cylinders all the same?

Are the window switches illuminated and if so what bulbs and how do you replace

Hey everyone I’ve been helping a friend repair a broken birfield on his 1994 land cruiser. I’m new to working on solid axle Toyotas coming from a ACVW background I’ve been learning a lot but this is my first time doing a birfield. I’ve gotten everything buttoned up but I went to put the outer c...

Hey all, Can the belt tensioner on a 2011 be replaced without removing the radiator & fan & everything, or is it a more complicated job? Not sure if it is a lot of work, or if I just haven’t figured out the magic moves yet. Thanks! Abe

I’m looking for a replacement hood for my 75 FJ40.

Hey All, I'm about to replace the idler pulley on my 1996 TLC with an OEM part. How do I remove the original idler pulley? Just keep loosening the 14mm nut in the center of the pulley? Thanks.