question

  1. C

    '73 FJ40 Headlight question

    Looking at different headlights for our build. I keep reading about these lights - Toyota (81110-60P70). I know nothing about these lights. Will these be plug-and-play with the wiring in our FJ or ???
  2. Rove Analog

    200 series roof rack question

    Hello, roof rack question. I am in process of getting this from a overseas shop. I am pretty sure it should fit but wanted to ask: 1) If the mounting brackets for all 200 series editions the same 2008 to 2021. 2) If all the 200 series globally also have the same roof rack mounting brackets...
  3. K

    stupid question - odd cabin noise

    I've had this '11 LX570 for about a month, and when I start it, I'm getting this odd noise in the cabin. After startup the noise starts pretty cleary at the :05-second mark here. Sounds almost like a bad HVAC system turning on, but it's currently turned off: In this clip you can hear what it...
  4. youngmanchego

    FJ80 power steering box and pump conversion on 40

    Howdy, I’ve been lurking without an account for about a year now. I’m closing on a 78’ this Friday (introductory post to follow). Out of the gate I’d like to upgrade the manual steering to powered. After poking around forums and FB marketplace, I’d like to go with the beefier 80 box and pump...
  5. Sinister

    Tire Question 23 LX600

    Im looking to switch out my tires, does anyone know if there will be any rubbing issues going from the stock 265/55/20 to 275/55/20? It’s such a small change but I’m not sure how tight it is in there now as I’m just coming from a 2011 LC. I don’t have AHC either if that matters. thanks.
  6. Scott Parsley

    Interested buyer/ climate controls question

    I'm currently feeling out the market for a 100 series. In your owners opinion how important is the non LCD/touch screen control of the AC/Heat. My concern is the touch screen failure. I'm much more inclined to consider Cruisers with the knobs as opposed to the touch screen. Am I crazy?
  7. A

    Parts Guru question regarding front windshields.

    Was there ever a factory option for a heated front windshield? I have a small crack and need to replace it anyway but was interested to see if there was one or an aftermarket set up that I'm not seeing. I know newer Tundra's have them as an option from factory because my dad's has it. Just...
  8. T

    Headlight Switch Question

    original wires and coupler long gone......... input appreciated as to which of the numbers correspond to what..........
  9. Spring Grover

    Early hardtop question, have sides but no bi-fold

    Hey all. I'm pondering building a second hard top for my `66 fj40, only because I currently have 2 real nice early corragated sides, and top laying around. If by some miracle I found a bi-fold set, would the standard rear cross member work, or is there one specifically built for the early sides...
  10. rstoddard

    Question on Adjusting Ignition Timing

    When adjusting timing using a timing light with an advance function, do you set the advance to zero and adjust the timing to the BB to get 7 degrees advance? If you want to try 10 degrees do you set the advance function to 3 degrees and time back to the BB (or set to 10 degrees and time to TDC...
  11. wingnutted

    2013-2015 LC LED High Beam Fit Question - Stedi HB3

    I'm looking to upgrade my high beams to LED's and I've previously had a great experience with products from Stedi. Does anyone know if this specific Stedi light would be a good choice and fit without needing to modify the housing...
  12. G

    Sensor Removal Question

    I found this cool picture on here and wanted to know how these sensors/switches are removed? It looks like a ratchet or socket will turn them out, but wanted to make sure I don't damage anything in case I need to pull one out. Thanks..
  13. leonard_nemoy

    Missing screw and lube question.

    I pulled the rear door panel off this morning to inspect the locking mechanism to order parts. Of course, I dropped the little door handle screw, part # 93520-54010, in the gravel. I hate working in gravel. I spent 10 minutes searching for it with a big magnet, but it is gone. Any idea on the...
  14. joshrabon

    Knuckle Stud Options

    Well it almost got me! I had a knuckle arm coming loose on my passenger side. Caught it just in time! My question is, does any one have info on a replacement stud/cone washer/nut that I could find locally at Napa until my real stud kit arrives? I don’t want to ride around on 3 for too long..
  15. Braydenp01

    12v vs 24v preheater for 2h question??

    Is the pinout the same for 12v and 24v preheater timer for the 2h?
  16. J

    Another lift and tire question

    I want to do a 1.75” Dobinson lift on my ‘16 Sequoia. I’m having trouble trying to figure out the right size BF Goodrich KM2 to use with my stock 18” wheels. Is the 34 x 12.50 the best option? Thanks for your help
  17. Joe45

    76 Alu-Cab Conversion question...

    Howdy!!! Does anyone have the measurements for inside the Alu-Cab THOR conversion? I am talking the measurements of the inside of the mounting area for the Thor. Alternately, the measurement of the 76 right where the Thor conversion connects to the roof. Reason: I am making a box for my pickup...
  18. NYIronPig

    Steering Box Question

    Will a 68-74 OEM steering box work in a pre 68? I know there is a different steering box for those models, but wanted to see what it would take to make the swap, as I have a nice rebuilt box now.
  19. willc

    Dumb Newb Question: Heat Gun

    I have a slight rub in my wheel well pictured. I bought the heat gun, fired it up, then got cold feet. I thought man idk wtf I’m doing I’m going to accidentally warp my tire or there’s going to be something behind this that I fry or catch on fire haha! So my new question… maybe more of...
  20. gray rider

    Ignition Lock and In Park Question

    I can turn the ignition off and remove my key without the vehicle being in park. i.e., still in "drive" but engine off and vehicle stopped. This started when I took the vehicle in to a dealer to be repaired for ignition key failure. The dealer repaired all ignition key problems but never...
Back
Top Bottom