ignition

  1. Jawsh

    BJ70 electrical gremlins

    Hey guys, Last week my little Cruiser decided to strand me. Shortly before it died, I heard relay(s) clicking intermittently underneath my steering column/dash area. A colleague managed to get me moving by hotwiring my fuel pump cutoff solenoid - not a long term solution, as the truck then...
  2. houstonfj40

    SOLD  Houston - 19100-61080 2F (non - US) Distributor - NEW in box

    For sale, 19100-61080 distributor new PLUS clamp. this is referred to as the non US distributor. $220 plus shipping from 77005 - Venmo
  3. N

    FJ55 No Spark

    Hey everyone, I recently picked up a 1971 FJ55 that has been motor swapped with a 1.5F. I'm absolutely stumped. I can get the truck to turn over, but no matter what I do, I get no spark. I have installed a new coil, plug wires, condenser, points, distributor cap, checked every ground, and...
  4. Z

    Radio interference after new plugs and coils

    On my '99 with 150K, I recently had a misfire on the #4. I already had new OEM denso coil packs and plugs ready and installed them. Misfire was gone and it runs great. My problem is that I now regularly hear interference through my radio - ticking that varies with load and throttle position...
  5. Ayc3

    Won’t turn over

    Please help, so I have 100 series that’s not turning over. It has power, alternators good, checked the 20amp fuse but when I try turning the key slowly turn it on it just try’s to turn over with no success. No clicking no like the started bad. Initially thought it was the key not being...
  6. DirtyPepper

    Light ring around key ignition - 1997 FzJ80

    Hey everyone! Can someone refresh my memory…? On a ‘97, does the green light up ring around the key ignition time out? After doing a bunch of work this weekend I’ve noticed mine stays on. Worried that it might cause a parasitic drain. Thoughts? Thanks in advance.
  7. A

    For Sale  Ignition assembly/coil

    Complete coil and ignition assembly for 75-76 2f systems. Works good. $75 plus shipping.
  8. S

    Seized Distributor Shaft - How to Replace Shaft Bearing?

    Hey all, I've been rebuilding my engine, and while the parts were at the machine shop I started work on the carb and dizzy, rebuilding the carb, and following the 'poor-man's recurve' linked here. After I got the dizzy apart, I noticed the shaft bearing didn't spin smoothly, and was audibly...
  9. innockyewus

    2001 Lx470 Wierd no Crank/

    Ive got an odd one here. Ive seen the many efi relay/efi circuit issues. But mine is an Intermittent no crank. My condition sounds like a bad starter. I cycle the key over and over and eventually it will start. BUT If i pull the efi relay it will crank every time but (obviously) not stat. I've...
  10. Milko

    Pertronix ignitor & coil, non US distributor

    Hello everybody, I was searching about this over the forum but since I have a non US distributor (and cruiser), I decided to give it a try and ask. Sorry but no part numbers stamped on the distributor, the rotor or the cap, I suspect cap and rotor are not OEM and will look to replace them as...
  11. mrjordann

    Engine help! New HEI Distributor, intermittent spark.

    Hey guys. Old distributor went out so I ordered a new one. I set it to fire on TDC compression stroke. According to my timing light, it's getting inconsistent spark. Why could this be? I believe power to the distributor is constant. Thanks for any help!
  12. mrjordann

    Wanted  Portland: HEI Distributor for FJ40

    Looking for an HEI distributor for my FJ40 asap. My daily driver's seemed to go out. 5/73 model. Thanks
  13. Rdeschain

    Key weirdness

    Forgive me if this sort of thing has been discussed before. I did a search and found nothing, but I'm admittedly new to searching this forum, so definitely could have missed something. '94 FZJ80 GXL, Aussie RHD import. I've had it for about 5 weeks. Came with two keys. One of those keys...
  14. Matmac22

    ‘98 LX Ignition Lock Cylinder Barrel Rod

    Hey guys, I know there are plenty of threads about this issue, but I am really just trying to source the right part. I have a 1998 LX470. Ebay sells a ton of them but they all seem to be stamped “7853B.” My understanding is that this part will not work and that it is for the LC with the manual...
  15. M

    Hello and Question about my 2008 FJC

    Hi All, My driveway was recently graced by a 2008 AT 4WD FJ Cruiser with over 230k on the odometer. While diagnosing a catalytic converter malfunction, I noticed that the driver's side bank had NGK plugs installed, but the passenger side bank was equipped with Denso plugs. My understanding is...
  16. D

    1984 Fj60 ELECTRICAL HELP

    Alright. So as things have been getting hotter Ive been running into some starting issues. Trying to fix this I bought a new battery. Replaced the alternator. Thinking the battery wasnt charged up enough to get a proper start. Following these fixes though it seems like it has more difficulty...
  17. GPainn

    GM  Starter sparked and melted battery cables

    I installed a new starter and connected it according to the online reference that I found, CENTER TO POWER and S SIDE (the little bolt on the right hand side) TO THE SMALL WIRE, LEAVING THE OTHER CONNECTOR EMPTY (the little bolt on the left hand side) *see picture. I started the truck (1993...
  18. M

    LC Series 100 ignition mystery challenge...

    My beloved 2001 LC has a gremlin. She has 190k miles and still runs and rides like new. But, three long dealership visits and $$$$ later, the gremlin still remains. No one seems to be able to figure out this one. I'm hoping someone here has experienced a similar issue.... 1) First issue; Car...
  19. K

    Ignition Rod replacement?

    After reading a horror story, I am thinking about replacing my Ignition Rod before it breaks. I am not currently having any problems but, my 2001 LX has 122,000 miles. Do you all think that is a good idea? If so, what is the best rod that I can buy?
  20. SerbCruiser

    93 FZJ80 Intermittent Engine Start.. Video Attached

    Hi forum.. as the title states.. I have a strange issue when it comes to starting the truck. As you can see in the video.. I turn the key and nothing happens. No sounds at all. On the 4th try, it starts up just fine. This has been happening for the last 2 months approx.. Last week I...
Back
Top Bottom