Does anyone out there know if I can acquire 1-HDT nozzles in the US? The shop I am looking at that has rebuilt 1-HDT injectors before said they have bought them from Toyota previously. After doing some calling around and searching forever online it doesn't seem that they can be sourced from...
dear fellows i want to adjust my TPS of hdj81 1hd-ft 24valve because i rebuild injection pump and nozzle but now lack of power in initial gears.accelerates slowly like someone have applied hand break and black smoke as well.
i attached voltmeter to TPS positive terminal giving 5.05volts and then...
I need a CC ECU (its label says "Speed control computer").
88240-60040
This will need to come from an RHD vehicle, and probably a JDM. It seems that the connectors for the combo meter are backwards from the FSM descriptions. It is located under the dash to the right of the steering column.
I was coming down a hill today when suddenly, my brakes decided to do a partial fail. Buy that I mean that I still had brakes, but the pedal has no feel at all until I hit near the bottom of travel and I have about an inch or so of pedal pressure.
I did a quick check, I have fluid and all of...
OK, it all started with two bulbs needing replaced now I got the bug and started following this it's like crack.
My question is;
Does the E-locker switch, aka magic button, have a bulb in it? And, does the power mirror switch have a bulb in it?
Hey everybody,
I was cruising at about 40 mph the other day in my HDJ81 and I lost all power. The truck would not go over about 15 or 20 mph. Funny thing, although I had no power, it seemed like it was revving much higher than it should. It sounded like around 1500 to 2000 rpm's, though it...
I have a 1991 HDJ81 and I'm having cruiser control issues. When I click the cruiser button to engage, the light will turn on. I'll set the cruise at a certain speed and some times it will work, some times it will not. When it does work and the cruise control sets it will only stay set for a...
I have a 1991 HDJ81. When I rev the vehicle between 3000 and 3500 rpm's for maybe 5 seconds or so the vehicle stalls. Does anyone know why this is happening? This was after I had driven the vehicle for over an hour.
Does anyone know why this might be happening?
Thanks!
Hey y'all, my water pump recently started leaking after I did a coolant flush. I ordered the parts to replace the water pump, timing belt, alternator belts and turbo water hose. Anything else that people would recommend that I replace while doing this job? Also, can anyone point me to a nice...
Just bought a 1991 HDJ81. Killer truck!! The brakes look fine, but when I put it in 4x4 low and first gear, they will barely stop the vehicle.
Any way to beef up the brakes some so that it will stop better or any other suggestions?? Or is this just one powerful 6 cyl turbo diesel??
Any help...
Hello all
So, I've been lurking around reading on and off here for a couple years, and finally taken the plunge. I'm going to document the process so that others know more about what they are in for when doing the whole vehicle immigration thing. For starters, I will tell the story about how...
I've heard there a lot of parts that are interchangeable from an HDJ81 to a gasoline 80 series. Is this true? How many different parts? Is the transmission the same?
Is anyone aware of an overheating re-start prevention on the 4.2L 1-HDT?
This is what is happening semi regularly; Started in the spring, never happened over the winter. I take a longer drive say 30-50 minutes usually highway sometimes not. Pushing her hard but nothing she can't deal with...
I'm thinking about buying an HDJ81 with 90k miles. It's a limited VX model 4×4 model with a 1HD-T 4.2L turbodiesel engine and an automatic transmission.
Anything I should know before buying one or anything I should look for? Are there any major flaws with these trucks?
How many miles can I...
I recently purchased and installed the HP Diesel series 2 intercooler (from Austrailia) into my 1991 HDJ81 (JDM spec). I decided to do a thread to share my results and add some additional pics and info on intallation not detailed in the instruction manual. Their is a couple slight differences...
PRICE $11,500
Lots more pictures at this link
https://www.flickr.com/photos/139397590@N05/sets/72157664688342404/with/25733109844/
This is a super rare unit and deserves to be back in the wild where it belongs, but I have too many projects and not enough time. This rig has the "poverty pack"...