front

Good morning Today I found the bracket for the damper ripped off. No idea why, I just did the groceries:) Two questions: 1: you guys think it’s necessary to remove the axle to get it welded? It’s necessary to warm the whole axle to weld it? 2: would it make sense to weld in another little...

I need a front sway bar for my 89 fj62. Preferably located in Oklahoma. Rust free.

Was there ever a factory option for a heated front windshield? I have a small crack and need to replace it anyway but was interested to see if there was one or an aftermarket set up that I'm not seeing. I know newer Tundra's have them as an option from factory because my dad's has it. Just...

I've just replaced front evaporator and expansion valve, vacuumed, and charged. Front AC blowing cold. When I turn on rear AC, it blows warm. I quickly turn it off in case there's a leak and I'll lose my refrigerant and then front AC will stop working, too. So long as rear AC stays off the...

Starting work on my DIY front mount intercooler kit and documenting my progress... I begin by picking a universal intercooler the Mishimoto G-line universal intercooler. Going over the specs, this is way overkill and i could have made it easier on myself if i went with a smaller intercooler...

I've searched the forums without success regarding this upgrade. My 2016 LC 200 would benefit from better front seats, the OEM ones are terrible and without any lumbar or back support. I did an upgrade on a 2001 Prado 95 I also own, using CELICA's Carlos Sainz edition front seats, something...

attached is my first attempt to build a front bumper on my 85 BJ73. I must say that I am on the fence on rather I should proceed on, or scrap it out for version 2. The engineering nerd in me mandates that this bumper must be pretty light to minimize the weight on the front. What are the...

I recently bled the brakes in my 1988 FJ62 (first time), and one of the rear brake bleeding nipples - the driver side rear) was different from the other 3! It’s shiny, and new, and not covered in grease and dirt like the other 3. It takes a 10mm wrench like the other three, and it is functional...

The front parts of my front fender liners were trimmed to clear larger tires on my 2015 and they won’t work with my TJM bumper I’m moving over to the 2015. The liners are in two pieces and attached by plastic “rivets” that appear to be single use. Are these single use rivets or is there some...

Hello all, I changed my brake pads and front calipers, and took that opportunity to bleed the brake system. It all went well until the last one.. The front driver side (which had the seized caliper in the first place) brake was very slow going when attempting to bleed, and there was some black...

Replaced both drive shafts recently, rear was required for axle conversion. Both worked great and had no issues in the time I have owned my 60. Prefer local area over shipping if possible. $200 both.

Hi, so I posted a question yesterday and got the answer i needed but it opened up some more questions. trying to determine the year of this axle. when i bought it aI was told it was from an fj40 85. it has discs, the reason for buying it. the upper diff hugging u bolt perch is round, and the...

One of my original leafs broke. Looking for stock OE not OME Thanks

I'm reserching front bumpers for my son's 18 4runner. I'm looking for what your running, likes and dislikes. It is mostly street with mild off road. Last spring he hit a deer and wants a bit more strength in front. Looking at something that covers to the side with a loop by the grill. Here's a...

hi, I searched a bunch and found no info on this, so hoping its just a known thing that I dont know. I bought an 85 front fj40 axle to swap into an 82 hj47 troopy to get front disc brakes. I was looking for 60 knuckles to swap, but found this whole axle thats actually for the car for cheaper...

For a vehicle engineered with higher targets than most vehicles, the front cupholders in the 200 sure do miss the mark. I wasn't quite convinced that I would be satisfied with the 3D printed options that are out there, and after some more searching I came across this option for a rubber insert...

Just realized that the shop that I had remove my engine and do some frame work just snipped the battery wires, fusible link, and a couple other connectors when removing. Lazy. Looking for a front engine bay or headlamp harness for a 97 80, should include the engine bay fuse box and fusible...

Selling a custom built Trail Tailor front bumper for an FJ60. Bumper has front tube hoop, built in 2" receiver hitch, and double recovery points for shackles. Bumper is coated in black Monsta Liner and includes all mounting hardware. No bends, dings, or dents. Bed liner has been touched up in...

For sale front dust shields fj60. no rust just dirty. $75

Front brake calipers for 200 LC / LX. Came out of a 2011 LX with 100K miles. One or both of them were sticking, so they need refurbished / rebuilt with new seals, etc. Toyota / Lexus websites says they will fit 2008 to 2015 LC or LX. Parts numbers: 47730-60280 - passenger side...